Jump to content

Makro Wireless Headphones Not Pairing


Recommended Posts


9 hours ago, usaflaginmaine said:

Anyone else have trouble pairing the wireless headphones? Did I maybe get a defective pair?

Do you have the latest instructions included in the package?

2.4 GHz Wireless Headphones
Pairing Instructions
1. Insert the dongle in the socket located on the left side of the system box and turn the detector on.
2. Switch the on-off button located on the right side of the headphones to ''on'' position.
3. The blue LED on the left side will start blinking fast.
4. For channel selection, push and hold the trigger switch forward and press the down button simultaneously. Each time you press the down button, channels will change between 00-05.
5. When the pairing is successful, the audio will be heard through the headphones and the blue LED will start blinking slowly.
6. If no pairing occurs, press on the button marked with a white dot on the headphones with your finger to switch to the channels at the alternative frequency. Then repeat the pairing process at number 4. Each time the white button is pressed on, 1 or 2 beeps will be heard from the headphones. Each beep indicates switching between channels at alternative frequencies. 
7. Once the pairing is complete, the headphones and the device will connect automatically at the next start-up.
8. If the paring is not successful after you remove the dongle and insert it again, repeat the above processes.
6. To adjust the volume, use the on-off/volume knob on the device. 
NOTE!
1. If the connection is lost during pairing, turn off and restart the device and the headphones and repeat the process.
2. If the disconnection continues, turn off the device and the headphones and remove the dongle.
3. Insert the dongle again in its socket and repeat the above process.
Charging
1. Insert the supplied charging cable into a USB socket (PC, adaptor etc.)
2. Insert the other end into the charging jack on the headphones.
3. During charging, the LED next to the charging jack will light up red.
4. Charging will last approximately 4 hours.
5. Upon completion, the red light will go off.
Technical Specifications
Frequency: 2.4 GHz 
Audio Output: Mono
Battery: Li-Po
Battery Life: 14-20 hours
Charging Time: Approximately 4 hours
Transmission Range: 10 meters (33ft.)

 

  • Like 1
Link to comment
Share on other sites

My first set of wireless headphones for the Racer 2 paired up pretty much straight out of the box.  The second set I received with the all or nothing volume issues resolved did not pair up straight away.  The step that made the difference was pressing the large button with the white dot on the side of the headset to change frequency, though you may have to remove the dongle and power up the Racer again on each frequency change to make it happen.  

My Racer 2 now pairs up straight away without issue.

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...