So rather than spend $200 for the XP branded case I thought I could do better. So first I bought the Plano model 108442 gun rifle case for $70 shipped on Amazon
I just got my Deus with both HF coils. Is there any reason other than coverage I would want the 13" coil? I hear it's pretty nose heavy and I'm thinking the HF coils are so amazingly sensitive and deep I probably would never have a use for the 13" right?
By Steve Herschbach
Some random notes, and if you don't know what I am talking about as regards some detail of this machine or that I apologize.
Well, I finally updated my XP Deus with 11" coil to the version 4 update. Then I hauled it and the Nokta Impact with 11" and Teknetics G2 with 11" out for several hours of cross checking coin type targets. The G2 is a Gold Bug Pro variant running at 19 kHz and I put it up against the Deus at 18 kHz and Impact at 20 kHz. I acquired the G2 new recently to use specifically as a benchmark unit because I am very familiar with it and because in my opinion it does 19 kHz as well as it can be done. I spent hours swapping machines as the hunt machine, then cross checking the undug targets with the other two. Lots of settings tried, with the main goal to try and find some deep fringe type target or target in trash where any machine can get a clear and definable edge.
Well good luck with that. All I mainly did was impress myself again with what a little powerhouse the Gold Bug Pro/G2 is for the price. It is fairly mineralized ground but not the worst, 5 bars out of 7 on the G2 Fe3O4 meter, ground balance about 86. The only real "aha" moment was in learning the Impact really likes to upscale shallow small foil when in 5 kHz mode, but shoves the id back down to where it should be at 14 kHz or 20 kHz. All the machines like to upscale deeper aluminum in this ground.
All three seemed to get tricked in much the same way on certain targets, like a deep pull tab reading like a dime. For gold hunting purposes I do not mind machines upscaling low conductive targets, and in fact the Impact 5khz mode may have a benefit in nugget detecting because it does want to push light foil (and therefore small gold) higher. But for coin detecting upscaling aluminum is annoying. Pretty much par for the course however for mid to higher single frequency machines.
I found running the Impact in VLX1 was nice as I could flip over just one click to the Gen(D) mixed mode program for a dramatically different read and better target definition. Target id numbers in my ground are slightly higher in the "expanded ferrous" modes like VLX1 and VLX2 compared to DI3 and DI4.
The Deus V4 Gold Field program does seem to pack some extra punch now, be fun to get it out nugget hunting once the elliptical coil hits the streets. The new Deep mode really seems great while the new Hot mode is, shall I say it, interesting. First time I have used the X-Y screens also.
The G2 is what it is, almost no controls but it gets the job done with what it has, and good solid id. Deus and Impact in the other hand have countless options and programs to try, but by and large there is no magic bullet. Three great machines, I can hunt with any of them. It will take a lot more hours to sort it all out.
I find when running machines that are all hitting the VLF Wall that it is the "other things" that get my notice. The Impact is obviously the heavier of the three (4 lbs 4.7 oz / 1946 grams), although very well balanced, so I give the feel on my arm award to the G2 (3 lbs 1.5 oz / 1404 grams) and the Deus (2 lbs 4.0 oz / 1020 grams with 11" coil and control box). The G2 and Deus are neck and neck in the comfort department FOR ME* but the G2 feels ever so slightly better to me, I am guessing because the coil is lighter on the G2. The G2 slays both the Impact and Deus for speaker volume if run without headphones, but on the other hand it has no volume control so would be too loud for some situations.
Been awhile since I ran a Gold Bug Pro / G2 unit and caught myself when switching from disc mode to all metal when cross checking at one point and forgetting that the "big number" changes from target id in disc mode to ground phase in all metal mode, so I was looking at the ground phase instead of the little speedometer thinking it was target id for a couple goes. That one quirk always had me liking the F75 versus the Bug in all metal. I wish Fisher made a 19 kHz F75!
*On arm comfort is a very subjective subject. In particular it has a great deal to do with the size of a persons hands plus length and thickness of their forearm, and their height. You really can't take any one persons word on this subject as it is like buying hiking boots. What fits one person does not fit another. It is not all about detector weight by a long shot. Balance is very important as is the all important hand grip. I am 5' 11" with forearms on the thinner side and smallish hands. For instance, my forearm really bounces around in the large Impact armrest area. The Deus armrest which may be too small for some fits me better. For me personally, the 3.5 lb Teknetics T2 / Fisher F75 is the most comfortable detector I have ever used. It is superbly balanced and something about the hand grip that narrows to the top as it cants forward really makes my hand happy. I can squeeze the armrest shut to fit my arm. So if you find the F75 to be a great fit for you, my comments apply to you. If you hate the T2/F75 setup then what I have to say is less important.
I just ordered my first Deus and a HF coil. So can you clarify. In the parks around town should I keep the freq lower or still take advantage of the higher freq? Seems from the videos I've seen so far the higher freq make non-ferrous jump out more. So will I ever need to use the lower freq at all?
I understand I am gonna use the 80khz when prospecting for nuggets but have been curious about the benefits of using the lower freq still
Forgive my newb questions.
The owner's manual for Deus detector recommends when components are charged to disconnect charging harness from components.
I really don't know electrically what happens with say the wall charger, or even a auto charger adapter when Deus components reach full charge.
So, I have this portable pack.
Will show a front and back pic.
It has a percentage of charge left shown in upper right corner.
This thing seems will charge a Deus up a bunch.
Here is where the pack may come in handy even when at home and you desire to charge your Deus,,but can't be there eyeballing it when it reaches full charge. Or maybe driving and don't want to monitor charge process.
Btw other packs may operate similar,,this is only the second type I have owned,,first one didn't give info like this one does.
Anyway, when Deus components (all) when connected reach full charge the pack seems to shut down,,due to no load being applied.
The percentage number of power left in pack (numerical indicator) goes out when all Deus components are fully charged.
Bought this one at Wally World for $28 bucks.
Will pump a cell phone battery up too, tablets, etc.