Jump to content

True All Metal No Motion Mode


Recommended Posts

Boost carries over to the al metal side if set on the discrimination side firs.

 

Link to comment
Share on other sites


The Rutus Alter 71 manual says this about Non Motion All Metal mode

1. Motion channel with object identification and Discrimination

2. All metal channel with adjustable operation speed

Signals processed in both channels are directed to the sound control circuit.

The Motion channel with object identification and Discrimination ensures the objects are properly identified. The identification result is directed to the display independently of the sound control circuit, but the sound signal is directed to the sound control circuit only when it is allowed by the Discrimination, Notch or Masking settings. The Motion channel – as its name suggests – requires that the search coil be moved relatively to the object.

The All metal channel reacts to all metal objects or, depending on the soil category (using data from ground balance) and SAT setting, can react to magnetic objects under certain conditions (so called hot rocks, ceramics, bricks etc. and objects other than the soil).

The All metal channel can be completely non-motion (SAT = 0) or it may require the movement of the search coil as the SAT parameter is increased. When SAT is set to 20, the All metal channel works as a „single-filter” Motion channel – where movement is required.

I like the ability to set search frequency very low, and with adjustable SAT is set to 0 a true unfiltered Non Motion static mode?

 

Capture.JPG

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...