Jump to content
Sign in to follow this  
Guest Jennifer

Steve's Over Caffeinated, Hi-nrg, Maxed Out Zed Settings Find Virgin Patch In Gold Basin

Recommended Posts

Guest Jennifer

Well after getting skunked on my usual areas in Gold Basin today, I was getting the feeling that maybe I should try something new (I move around a lot, as people who detect with me will attest). If I'm not on colour or it feels wrong, I'll move at times several miles and start again.....

So, I went to an area that I'd been hoping to try again after being chased out by trash last time.... it dawned on me today, why....  I got out of the truck, did a quick walk up to the side of the hill/bench and fired up Zeddie.... but this time, I thought... I'm not getting skunked today.... let's crank this bad boy up.... I had been running at sense of 10-15 today, depending on the area..... I thought to myself, let's give Steve's Mac Daddy Go Big or Go Home settings a run... In all honesty I'm usually running very similar settings, minus his hi gain. Well up it went.... wow, noise much but I figured.... I had nothing to lose,  I'm learning the machine this Summer, I might as well see if i can get use to running super hot..... I did a quick ground balance and away I went... I got less than 10' and heard angels (well, ok, maybe it wasn't angel's but you all know the sound).... BOOOOOO YAAAAAAAAAAA nice rough little nuggy DEEEEEEEP.

I proceeded to do a little "Beat the skunk, thank you Steve's settings" dance in circles..... as I was filling in the hole it struck me, why wasn't this found, out in the middle of a huge wide area, easy target... oh well.... then I commenced detecting..... and as I wandered and dug HEAPS of small trash that should have been dug by detectors before me, it dawned on me...... and then... mid thought... WOOOOOOOOOO WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO oh man.... a pop can, like I need another one of those..... and down I dug...... hmmmm when did gophers start drinking soda, this thing is deep.... and then out came a 73 grain chunk.... oh yea.. oh yea... who your daddy!!!! :tongue:

I then realized, I'd found my first virgin patch, and on Gold Basin no less...... 20 sensitivity is my new normal....... wow, what a huge difference... I've gone from hating a chatty threshold to now realising the power that same noise has.....

It was getting late, the patch is hard to get to/from in the dark so I left..... this story will be continued.... (I hope)

I'll post updated cleaned pics after they get a bath. $324.00 at $50.00 a gram... I may have an extra ice tea tonight at dinner. :biggrin:

Thank you Steve........ for your continued reference in some of your posts (including your one recently with the shovel in it) where you mention this may be an option for some.... it was for me today and is my new norm.

Jen

gold 4.jpg

gold 3.jpg

gold 1.jpg

gold 2.jpg

Share this post


Link to post
Share on other sites

That's quite awesome Jen! It has been very interesting watching your GPZ journey. Early on you were having issues but I am getting a bit wiser with age and stayed quiet. I figured you would either come to it on your own, or that the GPZ was just not for you. To this day I still think it is far easier to transition from VLF detectors to the GPZ than from PI detectors to the GPZ. Skills built using hot, noisy VLF detectors in difficult ground help very much with the GPZ.

The same goes for my settings. They are based on how I run my Gold Bug 2 not on how I ran my GPX. I have been using them almost exclusively for two years now. The secret is getting the audio set so the chatty stuff just becomes a relatively quiet background sound. After you get the ear for it nuggets jump right out of that background artificial threshold. 

Now you can argue nuggets are missed due to being masked by the noise but the way I run it the "noise" is the threshold, and it really is no different than using a normal threshold. Your ears and brain will rapidly start to ignore the "normal" noise but any variation does jump right out, just like with a regular threshold sound. In other words, I am not hearing noise or chattiness - to me it's just my normal GPZ threshold sound.

The proof is simple. You have to find a few nuggets running the settings though to see the proof. Each time you find what you think is a nugget, try other settings before digging it. I don't care which, try them all. Nine times out of ten the signal strength will diminish, and in a lot of cases the target will just disappear. Once you see this a few times you realize that you would not find those nuggets with any other settings. I really, truly understand the theory of quiet thresholds and target masking due to excessive noise, but if the detector can't make a peep at all on a nugget I found running these settings with any other settings....

As always though I have to throw in my caveat and warning that these settings do not work everywhere and not for everybody. If nobody else except me uses the settings I will be just fine.

Congrats on the great nuggets! And thanks for a warm fuzzy - I love seeing it when something works for somebody. :smile:

  • Like 5

Share this post


Link to post
Share on other sites

Jen,

I think Steve's settings and your personality might be a MATCH!

All of those different voices in one machine (talking at the same time) and all of your energy for separating it will be quite a formidable force against the remaining gold in the basin.

Good shooting.

Mitchel

Share this post


Link to post
Share on other sites
Guest Jennifer
4 minutes ago, mn90403 said:

Jen,

I think Steve's settings and your personality might be a MATCH!

All of those different voices in one machine (talking at the same time) and all of your energy for separating it will be quite a formidable force against the remaining gold in the basin.

Good shooting.

Mitchel

I reckon we start calling them the "Steve's Type A Personality Zed Settings". I don't know about Steve's personality type but it suits me =+)

Jen 

Share this post


Link to post
Share on other sites
Guest Jennifer

Cleaned in CLR and ultrasonic. Iphone camera never does gold justice in photos.

It's hard to tell in the photos but that little one turned out to be a GORGEOUS little speci... love it.

IMG_2693.JPG

IMG_2690.JPG

IMG_2691.JPG

IMG_2692.JPG

Share this post


Link to post
Share on other sites

Very, very, very nice!

Share this post


Link to post
Share on other sites
Guest Jennifer
3 minutes ago, 1515Art said:

Very, very, very nice!

Thanks Art

The little ultrasonic cleaner I bought off Amazon for $50.00 is worth its weight in gold, a detecting buddy in Rye Patch turned me on to it, best $50.00 I ever spent.

 

IMG_2680.JPG

Share this post


Link to post
Share on other sites

WOW....Awesome Jen. Good on you girl. I can see I am going to have to try those insane settings of Steve's. Thanks for sharing you exciting find...both in gold & using those hot settings. Obviously works. Well done.

Good luck out there

JW :smile: 

Share this post


Link to post
Share on other sites

Absolutely beautiful! Congrats! 

Share this post


Link to post
Share on other sites

Great to see that you and the GPZ are still making beautiful music together... Like a high end thoroughbred race horse  sometimes the Zed just wants to  run! ..... crank up the music, let your hair down and enjoy the dance....Try not to over do it there in all that heat :smile:

strick

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Similar Content

    • By mlgdave
      I updated to the latest firmware in september, sunday when I was detecting I would lose my sound through the wireless, I plugged in headphones and no sound from the machine through them either EXCEPT for turning it on, and also when the WM wireless connects I hear that (but probably from the unit not the headphones)
      Anyone else have issues, I do see 2 other threads but have tried both fixes including updating again. No dice, need the GPZ!
      mlgdave
    • By davsgold
      JP has put up a youtube video about this new ground balancing method.

      cheers dave
    • By Norvic
       
      Above is a quote from Jasong, from another thread that hits the nail on the head. Somewhat a forbidden topic on OZ forums, which I guess says a lot about social media. This matter has been touched on by others when speaking about the "new age" coils on the Xs in other threads. While I`m a confirmed and dedicated Z user, I recognise because I`ve experienced the ability of these coils and how they have closed the gap( in the field on undisturbed gold), plus in some cases exceeded the Zs ability. Saying that I`ve also experienced more cases where the Z exceeds the Xs ability.
      But it is interesting and really says it all about the dominance of ML, their only true competition to their latest serious gold detector is their model it replaced. This has been so for how many years?  What are the other detector manufacturers doing? And why is it sort of "taboo" to post about this subject?
    • By Rege-PA
      GPZ Coil coming soon.

    • By Reg Wilson
      Jonathan, any truth in the rumour that Minelab are considering introducing a lightweight version of the 7000? A proper prospecting detector rather than a modified military monstrousity that the Z currently is? 
      You being close to Minelab, I'm hoping you may be in a position to enlighten us. I for one would consider an aquisition should this come to pass.
    • By Jonathan Porter
      Just returned from my annual trip away (that's another story for another day), I've been out 3 times detecting since getting home and two of those were training sessions. Yesterday morning it was my turn to do my own thing for a few hours before the heat beat me to a pulp. A few minutes later and I had a plucky 1 gram nugget on a continuation of a spot I detected with my son Timothy back in July (got AU$800 worth off there for the session, much to the delight of his pocket book).

      There is a fair amount of trash and the obligatory shot gun and 22 bullets along with the added hassle of a high voltage power line, so I had to concentrate on the wide broad deeper sounding targets mixed in with the Sferic and 50 Hz noise, 3 hours of this and you find yourself needing a little lay down. This location is also problematic because it is on a slope above a straight flowing gully so the coil is opened up to even more interference dependent on where you are working on the slope.
      Long story short I plucked some nice gold for the effort which made the little lay down later on justifiable. Interestingly I pinged a solid 5 gram chunk in my old scrape from the 5000 days, a boomer signal for the GPZ and not that deep so can only assume the quieter running GPZ 7000 was clearly an advantage in a high EMI area. Just below it I got a nice deep warble that made my skin goose bump and sure enough 16 inches down a 13 gram slugster came to light pushing the mornings total to 23 grams of 97%-98% Clermont golden goodness. Considering I spent 2 weeks in WA this year without a piece of gold this was pure heaven especially since I have more signals to investigate over the next few days.

      The GPZ still continues to amaze me, if only it was lighter and more manageable so that other people could tap into its potential more fully. The weight really does detract from good detecting practices with this technology. The Super D coils really do need to be kept above saturation effect for maximum depth on the deeper pieces, the coil sweep also needs to be evenly controlled, all vital methods that are are adversely impacted upon due to too much outright weight for the average user.
      JP

       

       
×