Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoticons maximum are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By oneguy
      I'm new to nugget shooting and have recently got a Gold Monster a couple weeks ago.  I wanted to get a little time on the machine and there's snow on the claim I have access to so I took the machine out to some nearby dredge piles to play around.  I got about 8 hrs on the machine so far. These dredge piles are about 15' high and I quickly found out how dangerous climbing around steep, frozen big boulders was....lol  I did get a few "hits" on the GM on top the piles but after carefully removing rocks one at a time I realized whatever set the machine off kept falling down in between the rocks deeper into the pile the more I chased it?  Very little small gravel/soil type material....just big cleaned rock.  So I learned that hunting the tops of these piles will most likely end in defeat or injury.  I hunted just a few hrs on the wooded flats near the base of some piles.  So far I've dug lead bullets, casings, some iron, and new aluminum so the machine is working, etc.  My question may sound stupid but I'll throw it out there.....   Is there a semi productive way to search these piles?  Should a guy just search around the bottoms and flatter ground where maybe some of the finer material has finally settled?  I'd taken a rake along with me when I went but never really used it as the rocks in the piles were much bigger once I got up close....lol
      PS.....Having only driven by these piles for years I must say that once I actually crawled around on the piles I was VERY impressed how much material those old dredges dug outta that creek.....amazing to say the least..........
    • By marwan
      what is the best vlf detector for nuggets gold?
    • By Highlandhowler
      Has anybody got any info a good prospecting shop in Socal.
    • By Sourdough Scott
      It has been a while since we last heard from Klunker on this forum. I sure miss hearing his insights on detecting and his other commentary. I don't know if he is just too darned busy detecting and finding gold? Or his computer broke? Or if he has been banished from the forum from the powers above . Any which way, I sure miss his 2 cents worth. Please come back! 
    • By Steve Herschbach
      This video features the Deus but there are lessons here for anyone chasing fringe targets....
    • By Murad
      Hello i have this artifact metal detector (66TR) from White electronics. but i need help with the search coil pinout diagram
      i have 5 colored wires ( Gray = 12v , Black = GND , yellow , blue , brown ) can anyone help me determining what are those wires for excatly
      if i had to make my own coil head because the old one is lost and i cant order another one online because my country restrict using metal detectors.
      i'm newbie with such advanced detectors, but i'm sure i can make my own if someone guided me through this.