Stand For MX Sport

[Ridge Runner]

[Ridge Runner]

Hope you can see it. I want to post a picture of the bottom but having trouble doing it.

Chuck

[Ridge Runner]

[Ridge Runner]

Well I got it and if you want to know how to build it just say so.

Chuck

[Ridge Runner]

You can see how it's made and you can make it to fit you.

The screws you see is 3/4 in. # 8 sheet metal and 2 plastic anchors you can't see

After you got the stand complete you need to stand the legs straight up and drill 2 holes. This line up with the holes that wholes the stand that's already there . Be sure not to drill the hole bigger than the screw so the threads catch on the PVC. The anchors need to fit in each hole and you need to cut about half of it off.You don't want the anchors loose in each hole. You can't screw the anchors on the screws then put in place. This is just to keep the stand from turning and with the zip ties it won't move.

The holes you drill need to be just right and line up so your stand stands up straight. This is more important than all the other.

Chuck