Jump to content
Sign in to follow this  
Tnsharpshooter

Concentric 6.5"x9" Coil Available For AT Series Detectors

Recommended Posts

Saw where a gent had received one of these.

http://www.garrett.com/hobbysite/2222600_6halfx9_at_pro_searchcoil_en.aspx

https://metaldetectingforum.com/showthread.php?t=254748

Btw here is complete list of Garrett coils available for AT series detectors.

http://www.garrett.com/hobbysite/hbby_at_searchcoils_en.aspx

  • Like 1

Share this post


Link to post
Share on other sites

I tried the concentric many years ago on the AT Pro on some magnetite laden ground. It is a very good coil on milder ground but it definitely had a harder time with the ground than a DD coil. Concentrics do have some advantages as regards the handling of bottle caps and other trash in a park type situation however and are worth consideration for sure.

VLF Concentric vs DD Coils

garrett-at-concentric-search-coil.jpg

6.5" x 9" PROformance Concentric Searchcoil For Garrett AT Pro, AT Gold, and AT Max (same part number all three models) PN: 2222600

Share this post


Link to post
Share on other sites

In our NW Ohio ground it works very well although in heavy trash I still prefer the 5X8 which is my favorite coil on the AT series. The 6.5 X 9 is my go to coil for hunting fresh water lakes. 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Steelheader
      Does anyone here know what the weight is for the new slimmed down D2 coil.  I know the old one was really heavy.  Is the new one much lighter?
    • By FeO2digger
      I own both a Garrett Recon and an ATX, can someone remind me what was found to be best 10 x14 Infinium coil to be used on each? 
      I was thinking someone found the Infinium 10 x 14 mono coil was best for Recon
      and Infinium 10 x 14 DD coil best for use on the ATX
      Is this correct or are all interchangable?
    • By Steve Herschbach
      This is a little premature perhaps since we are still waiting to see any accessory coils at all for the Equinox detectors. First up will be the 6" round DD followed by the 12" x 15" DD coil.
      What next? I think the Equinox has genuine potential as a gold nugget detector, but that the open spoke coil designs slated so far are not optimal for that purpose. Plus, some relic hunters etc. want something narrower than the stock 11" coil but do not want to give up the ground coverage as much as the 6" round coil does.
      Minelab has a couple molds for elliptical coils. There is the 5" x 10" DD coil for the X-Terra but that coil is not fully waterproof and too buoyant for water use even if it was. The better option in my opinion is the newer 6" x 10" coil made for the Gold Monster. The Minelab Gold Monster uses the exact same lower rod/yoke size as the Equinox, meaning the coil, coil bolt, and even the coil connector are already the proper size to fit perfectly to the Equinox.
      Here is my Gold Monster 6" x 10" DD coil mounted to my Equinox 800. As I said, a perfect fit. The Equinox version might weigh more due to more windings required for Multi-IQ but the coil as is weighs less than the 11" coil. My Equinox with this coil mounted weighs 2 lbs 13 oz or 2.81 lbs, slightly less than the 2.96 lbs with 11" coil. It does make for a little better balance.
      For nugget detecting in particular a solid bottom coil helps prevent snagging on rocks and stubble. I imagine the farm field hunters would love the coil for similar reasons.
      Anyway, I have no hints that this will happen but I am going to be referring to this thread over and over until it does. With a mold in hand half the work is done, and with the extreme popularity of Equinox no good excuse for this not happening. I personally think it is a requirement for Equinox to be all it can be as a prospecting detector and for many other uses also.
      Nope, not going to turn it on to see what happens!! 
      Anyone who thinks this is a good idea and wants to aid in the lobbying effort has my express permission to use these photos in posts on other forums, etc. The direct link to  the first photo is http://www.detectorprospector.com/forum/uploads/monthly_2018_04/minelab-equinox-with-6-x-10-dd-coil.thumb.jpg.07f2d166da68ca4c6e39bf21759c7c4f.jpg
      Click photos for larger versions....

       
    • By Steve Herschbach
      Five new coils for the Kruzer and Multi Kruzer (but not Gold Kruzer) from Mars MD Website...
      7” Round DD 6” x 10” DD 10” x 13” DD 13” Round DD 15” Round DD
    • By Hispania
      I just bought on eBay this coil minelab "super goldsearch 18". I bought it as a project for the tdi.
      I showed it to a friend with many years in the hobby, he told me that he had seen it many years ago and that he remembers it for the "beautiful design". It looks like the lid of a garbage can.
      According to when it was manufactured, it was a very expensive coil, designeg for the SD,  but it has no more information.
      Does anyone know anything about this coil?

    • By Tnsharpshooter
      Saw this listing.
      The prices for all Equinox coils was set at zero until recently but seems now a price is reflected on the smaller coil.
      Don't know how much stock to put in this here, but thought I would share.
      https://www.bigboyshobbies.net/minelab-equinox-06-double-d-smart-coil
      https://www.bigboyshobbies.net/minelab-wm-08-wireless-audio-module
      https://www.bigboyshobbies.net/minelab-equinox-bluetooth-headphones
×