Tom Slick Posted March 1, 2018 Share Posted March 1, 2018 You're supposed to be able to change the Kruzer to read Inches instead of centimeters while by holding down the Select and Options buttons simultaneously while turning the detector on. Another forum member found that on his detector he had to hold the Settings and Options buttons while turning it on to make the chance. Mine won't change trying either method. Mine shows Ld while doing this. Anyone else having the same issue? Of course mine's stuck in centimeters. Link to comment Share on other sites More sharing options...
Noah (FL) Posted March 1, 2018 Share Posted March 1, 2018 Edited......hold settings and options while powering detector on, continue to hold them until in. or cm is displayed 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted March 1, 2018 Share Posted March 1, 2018 Page 24 of the Owners Manual (see last paragraph): IMPORTANT! If you want the target depth to be displayed in inches instead of cms please do the following: While the device is off, press and hold the SETTINGS and OPTIONS buttons simultaneously and turn the device on. ''In'' will be displayed. To switch back to cms, you need to turn the device off and then repeat the above procedure. While the device is initializing, ''SI'' will be displayed. Link to comment Share on other sites More sharing options...
Tom Slick Posted March 1, 2018 Author Share Posted March 1, 2018 All is good now. Misprint in the manual. Manual states Select & Options buttons but should read Settings & Options buttons. At turn on detector will show Ld then flash either In or Cm. Link to comment Share on other sites More sharing options...
Steve Herschbach Posted March 1, 2018 Share Posted March 1, 2018 Ah... you have the older manual I am guessing? The link above is to the newest manual and where I got the excerpts above. 1 Link to comment Share on other sites More sharing options...
Guest Tnsharpshooter Posted March 1, 2018 Share Posted March 1, 2018 I sent email to Dilek alerting her on this matter due to poster's comments on another forum. Poster Ski Whiz. Sent last nite. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now