Ken Walls Posted January 14, 2014 Share Posted January 14, 2014 If anyone has a Garrett ATX and needs a coil cover to protect the coil until one is available, you can use the covers for the Infinium coils, they do leave a small overhang in the front and rear, but its not bad and they do snap on for a snug fit. Link to comment Share on other sites More sharing options...
Guest Paul (Ca) Posted January 15, 2014 Share Posted January 15, 2014 Thanks ken for the great tip, I may order one this week thinking of ordering another Infinium coil might as well order the coil cover as well can use cover for both coils. Thanks again, Paul (Ca) Link to comment Share on other sites More sharing options...
Ken Walls Posted January 16, 2014 Author Share Posted January 16, 2014 What coil are you looking for, Steve has a couple for sale here on the forum. The standard 12X14 coil cover fits both the mono and DD infinium coils. Link to comment Share on other sites More sharing options...
whitefish Posted February 10, 2014 Share Posted February 10, 2014 Hi Ken, the infinuim coil covers will fit the Garrett ATX DD coil? What size infinuim coil cover are you using to fit the ATX DD coil ? thanks Bert Link to comment Share on other sites More sharing options...
Steve Herschbach Posted February 10, 2014 Share Posted February 10, 2014 Infinium 10 x 14 inch Coil Cover PN: 1606400 Like Ken said this hangs out on each end. There is supposed to be a fitted coil cover for the ATX stock coil out now but they seem to be a secret, not on the Garrett website. Link to comment Share on other sites More sharing options...
GeoJack Posted February 18, 2014 Share Posted February 18, 2014 I just picked up my ATX last week with a cover in the kit. Link to comment Share on other sites More sharing options...
Steve Herschbach Posted February 18, 2014 Share Posted February 18, 2014 Hi GeoJack, Welcome to the forum! Can you post a picture of the cover? I have not seen one posted anywhere yet and no mention on Garrett website. Was this a US purchase? I got the impression maybe Australian dealers were including the scuff cover because so far that is only mention I have heard of it so far. I am wondering if it is now officially included with the ATX or if it is a dealer add on. Link to comment Share on other sites More sharing options...
GeoJack Posted February 18, 2014 Share Posted February 18, 2014 Sacramento dealer. Was in the soft case when I got it. Link to comment Share on other sites More sharing options...
Steve Herschbach Posted February 18, 2014 Share Posted February 18, 2014 Thanks and very informative - sounds like they are shipping included from the factory now. Be a great scuff cover for prospecting, should be less tendency to hang up on obstructions. Link to comment Share on other sites More sharing options...
GeoJack Posted February 19, 2014 Share Posted February 19, 2014 It does "swim" a bit in water. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now