Jump to content

Recommended Posts

Lunk,

All of the reviews I have seen so far on the Monster have been about it going over 'worked out' patches or previously worked patches to test its sensitivity to small gold.  (Going to where gold has been found before.) That is ok, I guess.  When given the task of testing a new detector you can't just 'dial up' a new patch.

I've held one of the Monsters.  I would use it in places like where you went but also in more difficult to reach 'spots' just from a weight and ergonomic perspective.  Some places where we don't look for gold is because it is too difficult taking a heavy and big detector with us.  (I guess someone could have gone there with a GB2 or a Pro like Steve did on the Alaska tailing piles.)

This is what I wonder.  How does this detector react to a big piece of gold?  Big is a relative term but let's say anything over 5 grams.  Did you plant any test nuggets like that?

Mitchel

 

  • Like 2

Share this post


Link to post
Share on other sites

10 hours ago, mn90403 said:

How does this detector react to a big piece of gold?  Big is a relative term but let's say anything over 5 grams.  Did you plant any test nuggets like that?

I found the Gold Monster 1000 to be extremely sensitive to a wide range of nugget sizes and types of gold, with a definite edge on depth in mineralized ground - for a VLF machine, anyway. 

  • Like 1

Share this post


Link to post
Share on other sites

I should also add that when up close and personal with a large metal object, the Monster emits an overload alarm similar to that of the Fisher F75...a surprising feature that I was not expecting. 

  • Like 3

Share this post


Link to post
Share on other sites

Thanks for the great review.  Can't wait to get my hands on one for searching dredge tailings here where I live in Idaho..

HOT Rock.jpg

  • Like 2

Share this post


Link to post
Share on other sites

This post started out being called A Monster Month.

What I'm wondering if we will see the Monster this Month of May. Somebody out there knows more about my question than being said. Just like May 8th before that nobody knew nothing and I think this wholes true again.

Chuck

Share this post


Link to post
Share on other sites

Well another week has gone as of today. Minelab on their site say that the Gold Monster 1000 is available now.

Hawkeye

He also say Man who fly upside down wind up with crack up. I know that to be true being I got steel ball in left shoulder for that one.

Chuck

Share this post


Link to post
Share on other sites

Chuck, have you ever been tail-gated by some one that thinks pushing will speed you up?  You didn't speed up and he didn't get anywhere faster; just heartburn...

I sympathize with your being out of patience but....Minelab won't go any faster and you won't get there any quicker...don't Worry be Happy!

fred

  • Like 3

Share this post


Link to post
Share on other sites

Fred

What you say I know is true and I'll leave it at that.

 I do want you to know that is a great article you wrote for ICMJ. It was well written and great to see a picture of you. You telling the finding of gold too made the story complete.

Thanks

Chuck

 

  • Like 3

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Steve Herschbach
      Equinox 800 in the Desert, Gold Monster 1000, and Nuggets.... Part 1
      Published on Jun 11, 2018 Nugget Shooter (Bill Southern)
      Took the EQX 800 out to the goldfields for a run, impressed so far...
    • By goldseeker4000
      I had talked with Detector Pro on the issue of headphones for the Gold Monster 1000 and I said they would do well on sales if someone would come out with a good after market headphones. Well they thought about it and called me back informing me that they are answering the call to produce a high quality headphones for the Monster that will eliminate the external speaker sound from coming thru. These headphones are the same as the Gray Ghost headphones but were made specifically for the Gold Monster. They are the Gold Series and there will be a special headphones coming out for the Exuinox as well. The cord is a pigtail style with an 1/8" jack that shuts off the external speaker. The sound is sharp and crisp with no distortion. The pigtail cord is 6" longer than the Gray Ghost headphones and I assure you there will be no more kneeling on the cord as we all have had to deal with until we just use the Monster without headphones. I feel these headphones are very comfortable  and block out external noises very well and they have a volume control on the side as well. I have the proto type as I have been asked to field test these wonderful headphones by DetectorPro.I will let everyone know when they will be available for purchase.


    • By Rod K
      I took my Whites TDI SL with both the stock 7.5" dual field coil and the 8"x6" NUgget Finder coil, as well as my Minelab GM 1000 out and tried them on some small 1.7 grain and 7.4 grain pieces of lead i use for testing. The minelab found both easily and at over 2" on the small one. The Whites wouldn't pick up either one with either coil. I am liking the Monster more and more. But was wondering? Should the Whites do better than it did?
    • By Steve Herschbach
      It has certainly been a busy year for me so far, with not as much detecting time as I would like. Still, I have been getting out a little and thought it was time to share a few photos.
      My first couple bits were found with the Minelab Gold Monster 1000 on some scouting runs. I am liking this detector as a grab and go unit for checking areas out quickly. I am not trying to hunt for max performance but instead looking to cover a lot of ground quickly to check things out. I have learned the GM1000 auto sensitivity actually suits me well for this. I just fire up the detector in all metal mode, full volume, and start with auto sensitivity set at Auto+1. Then I just start swinging. If noise intrudes (usually in salt areas) I will back down to Auto+0 (there are just two Auto settings available Auto and Auto+1).

      Once the GM1000 gets out and about people will no doubt note the Auto settings are not the hottest. Which is why I like them. The GM1000 is a super hot machine already, so I am looking more for stability than anything else, and know it will pop hard on any small nuggets I get over. If I were pounding a patch hard I would use manual sensitivity and push it high, but that would introduce noise and require very careful hunting. For me however the GM1000 serves best as a light weight quick and dirty way to check new areas - just grab and go.
      I posted previously about finding a nugget using Auto sensitivity which is where I learned how useful the setting is. Here are two more small nuggets located using Auto+1. Both nuggets banged hard, one at maybe an inch and the other at about three inches. I am not trying to promote or to push the use of this setting, I am simply reporting what I am doing and you can decide for yourself if it is useful for you.

      0.1 gram and 0.4 gram nuggets found with Minelab Gold Monster 1000 running in Auto+1 sensitivity
      I did finally get a GPZ 19 coil for my GPZ 7000 and it was time to give it a go. I tried one area I had hunted before in case a larger deeper nugget was lurking. My first lesson with the GPZ 19 was not how large and deep a nugget it can find but how small and shallow! The only thing I had missed and left to find was this less than 0.1 gram nugget. It was practically on the surface and so gave a small warble when it got close to the coil winding. I was surprised and impressed the coil can find gold this small.


      The next location is one I scouted with the GM1000 and found the 0.4 gram nugget. The spot got my interest so I went back with the GPZ 7000 and 14" coil to hunt it. Turns out it was a nice little patch with some chunky gold! The ground was deep so I mounted up the GPZ19 and hunted it again. I did come up with one nugget I missed before, whether from sloppy detecting or just a little too deep I do not know. It was a little 1.2 grammer at around a foot down. I continued hunting outside my area and came up with another at 1.3 grams.

      GPZ19 Nuggets
      I had removed the Minelab skid plate that came with the coil and replaced it with the closed Nugget Finder cover. I like this cover for uneven ground as it does not get hung up of rocks and sticks as much, but it does rapidly collect a pile of debris!

      The coil did false if banged on a rock and would require care in rocky ground, though I was running it as hot as ever so that contributes to it. I usually hunt grassy and sagebrush country and it does well here just gliding on the grass, though if the grass is deep it will ride up on it above the ground. Still, the larger size gave me this feeling that I had a little extra insurance in that regard and so I used it to hunt over low brush where it might reveal nuggets hidden when others went around the brush. False signals from banging a rock aside I do think the coil actually runs a bit smoother with my Insanely Hot settings. The GPZ19 is slightly too heavy for me for general use in hilly terrain and too large for a lot of the sagebrush areas. It is just the ticket however for covering large open terrain and that is where it will see the most use with me in the future, or for pounding old deep patches. The extra pound was not quite as bad as I was expecting and in flatter ground just my regular bungee setup sufficed. I did try out the Hipstick though and think it a better option for long hours with this coil.

      Well, lots of info there I hope people can get some use out of. It's always nice to be out prospecting whether or not I find any gold - but gold does help! 24 grams or about 3/4 ounce with largest nugget 4.5 grams or just shy of three pennyweight.

      This post has been promoted to an article
    • By U_U
      I have been using the GM1000 for maybe 20 hours, covered some (often difficult and shifting) ground and found what I normally would find, mostly trash, most interesting so far an old key. So far so good. It is not impossible that there might be some gold to find, but highly unlikely. I am trying to dig every clear signal.
      I am mainly out to find meteorites, and I am still unsure how not to overlook a possible meteorite.
      Very, very often I would get a clear signal with iron characteristic. When I remove the ground cover, it often slowly fades away. Not sure what that is. Sometimes I do find small corroded iron crumbs (then the signal does not fade). But most often nothing.
      Also, very often the GM1000 would give a really strong signal, but it is not possible to localize, because it just fades away even before I notice if it was an iron signal or not. I assume due to the auto tracking, so this might indicate a hot rock.
      But what would I have to expect from a meteorite? If there is iron, also as quite tiny grains, the signal should not just fade, is this correct? So I do not have to worry about the signals from hot rocks?
      Thanks for help.
       
    • By Whitbey
      I am looking to buy the Universal shaft Adapter for the Gold Monster 1000, any body knows a dealer who is selling it? Could not find any dealer in the US who is selling it on the web, and also did not see it on the Minelab website any more .
      Help is appreciated, thanks in advance!
×