By Gerry in Idaho
Help with IDing a few finds. While at one of my favorite sites in NV., using Equinox 800 I found a few oldies. 1868 US 2 Cent Copper is certainly a "Hats Off" moment. What's the Chinese symbols on the tin mean? Anyone know pewter silverware "think it's C Parker"?
Last is a really big bullet casing. It's short & not like a longer rifle casing. Pretty wide so the bullet was at least 50 cal +? Letters F. V. V. & Co stamped on base. There is no primer. If you think of anyone who knows such items, please forward. Thanks for your help.
At the moment I am a quantity clad hunter. Just looking for more efficient ways of operating. Currently I am using the Equinox 600 with wireless low latency headphones. I use park mode 1 with 50 tones and leave open VDI numbers 13, and 24 to 38. My method: I mostly bend at the waist with a little knee flex to dig (no kneeling); most coins are less than 5" deep. I use a Lesche 10" hand trowel and a smaller wider trowel for popping near surface coins. I only bend over once per target. I use a pinpointer after initial coil pinpointing leaving the pinpointer on facing away from the target while digging, dig target, pinpoint again as needed, recover target, turn pinpointer off, fill in hole, pick up tools, then straighten back up, pocket finds, holster tools and give the hole a final step on and start sweeping again. I have gone from using the pinpointer holster to using my back pants pocket as this is faster to draw and replace without having to stop and look to holster. Also started using a quicker holster for my larger trowel and keep my small wider trowel in my other back pocket. I use a small tie on hardware apron with a pocket for finds and a pocket for trash. My 600 is tethered to my belt with an elastic bungee cord so it hangs and moves with me when I bend and straighten up; it never gets laid on the ground.
Anyone like to share their method of streamlining to increase efficiency and cut down on redundancy.
In light of the recent release of the Minelab Equinox, and expected release of competitive products I've noticed various posts across the Internet of tests/reviews/comparisons of detectors on fresh and saltwater beaches with "Black Sand". But there is only a 50/50 chance that the beach "Black Sand" you are looking at is iron bearing "Black Sand". The other possibility is that it is plant matter that has decayed and been ground into fine powder by wind and wave action. Those in areas where Bog Iron is produced or those Southern Red Clays have to deal with sands that are iron bearing but not necessarily Black in color. Some of the hottest sands I've ever seen were Purple in color. To know whether the "Black Sand" is the bad kind(iron bearing) you need to test it, a simple magnet can help or a detector with a ground type meter. Unless a tester/reviewer has verified the black beach sand as iron bearing I would be skeptical of the results.
Just joined this wonderful forum. I was trying to decide on my first Detector and found a Deal I couldn't pass on MetalDetector.com. Took the plunge on a Fisher F70 bonus pack with 11" & 5" coils, Headset, carry bag and some other stuff. $475. I thought that was a good deal. Wasn't planning on spending that much on my first one so i hope it works good enough to find some nice small nuggets! We have a camping trip planned in Sept. in the Sierra Nevada's so I can't wait! Probably do some testing at or near home before the trip just to get a feel for it. Any tips on settings for around / in Streams? Here's a newbie question for you, if the coils are supposed to be waterproof, does that mean i can submerse them in shallow waters to detect? I'm hoping i can along the shores. REALLY itching for my Detector to get here now! Good Hunting! 😎
Hey there peops, i have a Nokta Fors CoRe with 13x11web coil ,9x5web coil and a 4x4 coil, and i also have a pinpointer.
I haven't found any gold with this machine,, but on a test nugget it does register/ give a signal.
My question i ask is , can i fit other coils to the machine that will be better for finding small nuggets ??
Hi , everyone ,, koopdog here, thanks for the add.
I prospect for gold mostly and have found around 40 grammes, both by using a sluice in my creek and with a detector.
I am currently using a Minelab SDC2300, and also own a Nokta Fors CoRe .
I aim to learn tips and hints from more experienced hunters.