Jump to content

How To Print Your Own Equinox Manual In Booklet Form!


Recommended Posts

18 hours ago, Jammin1 said:

This would be great right about now as l cannot get me 800 even started right now.... ?

Welcome to the forum.

Not sure if you are asking where the on/off switch is or if your machine does not turn on once you press it.  A little more information will allow others to help you better without unnecessarily giving you overly basic information you may already know.  Absent that, I will start with the absolute basics (no judgements. ? )

There is an on/off button on the upper left side of the control pod.  Check back here once you've found it and someone can walk you through it after that. 

If your machine is not turning on, you should make sure you have charged the battery first.  If it doesn't charge, then you may have a defective unit and should call Minelab for support.

Also, for basics like turning on and off there is a quick start guide in the box, you shouldn't need the manual. 

If you are able to post to this forum then you can also easily download the user manual pdf to your computer or phone by following the useful links in the first thread on this forum.  The manual is really good about teaching you how to do all the steps to set up the detector settings and even how to actually use a metal detector to find targets if you have never used one before.  Good luck.

  • Like 1
Link to comment
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...