Thegoldenone Posted April 28, 2018 Share Posted April 28, 2018 I made a waterproof connector using the cover plug for the WM - 8 module... using my Dremel I carefully cut a hole in the top and had to slightly widen the two ribs that come down inside the plug... becareful not to mar the edge of the plug where it seats against the O-ring ( red arrow) clean it all up with acetone or denatured alcohol... then use 3M 4000 sealant it's good for plastic! You can find it in any Marine store! I first screwed the plug in to the head of the machine then I coated the plastic of the 1/8 in headphone jack and inserted that through the hole I made making sure it plugs all the way into the machine if you're not sure turn it on and check! I then added the glob to the end to make sure it's sealed! Remember everybody you're at your own risk when you make anything for your machine! I have about ten hours on it! 2 1 Link to comment Share on other sites More sharing options...
steveg Posted April 28, 2018 Share Posted April 28, 2018 Presto! Waterproof earbuds! NICE!! Steve Link to comment Share on other sites More sharing options...
.thumb.JPG.b46839319dc8de4aefe1f42407094dbd.JPG)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now