Jump to content
Sign in to follow this  
Tometusns

A Nickel Day To Remember!

Recommended Posts


Tometusns -- that is CRAZY!  I have NEVER dug a shield nickel, and you got three of 'em in one short hunt?!   SUPERB!!!

Were they good 12/13 signals?  Deep?

Steve

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Very cool! Congratulations on the Shield Nickels. Still on my bucket list.

  • Thanks 1

Share this post


Link to post
Share on other sites

Congrats, that's how it's done!!!

  • Thanks 1

Share this post


Link to post
Share on other sites

Nice set of triplets!!!

It’s crazy how purpleish they get

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
10 hours ago, steveg said:

Tometusns -- that is CRAZY!  I have NEVER dug a shield nickel, and you got three of 'em in one short hunt?!   SUPERB!!!

Were they good 12/13 signals?  Deep?

Steve

Thanks Steve! 

Old nickels that I've found have many 11's mixed in with the 12&13's. 

  • Like 2

Share this post


Link to post
Share on other sites

Yes, I've seen some 11's mixed in, on some older ones.  

FWIW, I dug a 4" deep Jefferson nickel that was a perfect "12", and it's not the first time...

Incidentally, I also dug a 1" deep 1925 Merc, that read 25/26 in the ground...???  It air tests a solid 25... ??  I am CERTAIN I skipped over this coin, in the past, thinking it was a shallow penny!  ?

Steve

  • Like 2

Share this post


Link to post
Share on other sites

Congrats on those shield nickels... thats a hard one to get...Nice work!

strick

  • Thanks 1

Share this post


Link to post
Share on other sites

Triple wow... Congrats

  • Thanks 1

Share this post


Link to post
Share on other sites

I've been back to the park twice hunting the same area. First trip some lead, a blank cartridge(it still had powder in it) and a trigger of some kind...the second trip zilch!!....lol. Going back and try a different area. Oh, my first shield ever came from this park.

20190525_091120.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By 57buick
      I have been digging nothing but trash most of the summer and modern clad coins. Been a frustrating season. But I finally hit a small honey pot of an area.
      We have a historic park and residence thats been used for almost 200 years. and its several acres. I know that literally hundreds of detectorists have been combing this park for decades, they say theres nothing left there.
      Well, I beg to differ. I have started probing into the least likely areas that most detectorists wouldn't venture into and it paid off the first day. I spent an hour digging stuff just along a 50 foot strip from the car, one modern coin, one really old pull tab etc every 2 feet until I flipped one plug to find 4 coins! 1907 Barber quarter, 1923 Mercury dime, a buffalo nickel(no date), and a 1919 wheatie. continued to dig clad quarters and pennys every 2 feet then a diamond ring, says 18k in the band. Then to top it off dug up this old token from a billiards room, did some  research and it was a members only billiards room that ended in the 1920's in town.
      This one 50 foot strip of grass wore me out lol but I guarantee I will be back next weekend. Even the modern clad was all from the 60's and 70's so thats promising. And some might disagree but as long as I'm digging super old 1960's pull tabs that is still promising to me this area isn't over hunted yet.


    • By kac
      Took my AT Pro out in the water and didn't have too much so I hit an area near where I found some flying eagles and came across these.
      IH is 1881, the nickel is a shield 1866. Will hit that area more this fall when the undergrowth is down more, same with the water as the weeds were too thick to swing.

    • By RobNC
      Was a rough week at work and needed to unwind. Have been metal detecting when I could since my vehicle accident in April.
      Today me and my wife went to a place I secured permission to earlier this year. Not been able to get there until today. The grass was grown up about 3 inches here and I broke out my Tekentics T2 factory coil. It SUCKED. Skipped right over the 1963 quarter in the photo below. I could not believe it when I dug this one. That silver was beautiful. The Cors Shrew is no joke. This little coil has made me very happy. Went on to find a 1939 mercury dime and 1951 rosie silver dime! This is the most silver I've found in the last 16 yrs. The only other silver I found was back in 2003 and it was a single worn mercury dime. I also found a couple buttons, a 1944 or 1945 nickel and a 1926 wheat penny.
      I love my Teknetics T2SE. It's an amazing piece of equipment. With that Cors coil, it's a beast. Worth every penny.
       
       

    • By kac
      Found this one in between some tree roots, surprised it has the detail it has. The rough edge I was hoping it was a pine tree but still cool find.
       


    • By 2Valen
      On Thursday I went to search for more coins in a local park and in just 15 minutes I came across this Indian Head penny.
      I would like to know the best way to clean this coin so I may have it placed in a frame and hang it on a wall.
      This is the oldest coin that I have found to date, and it even beat out a 1924 dime that I found within 15 feet of where I found this penny.
      It had a lot of mud on it when I dug it up so I ran some water on it and found the date.
      This penny was wedged between 2 roots standing on edge and about 8 inches down. I had a ID number of 19 in one direction and a 20 in another direction so I decided to dig it up.
      I used the settings that another member showed me a week earlier when we met in Casey, IL. and I am sorry for not knowing the settings off the top of my head to put them in here.
      Please if someone knows a way to clean this up I would greatly appreciate your knowledge.
      I guess I am starting to get the hang of this Equinox 800 and I can only hope that this is just the beginning of a long and wonderful relationship of metal detecting.
      Valen


    • By rod-pa
      in the nasty clay prevalent in so much of the ground around where I detect....copper coins don't usually come out looking too great.  Sunday I got out to a new permission very near my house that  I have been trying to locate the owner for almost 2 years and just made contact 2 weeks ago.  The grass is crazy high (2-3 ft), so detecting was limited to areas under the trees and bushes.  Still managed what is probably my best grade Indian Head.  It still needs some more dirt picked out, but taking my time with this one.
      Going to ask permission to take my mower over there if I get time to go again.
      Happy Hunting!
       



×
×
  • Create New...