Clearly, with the huge amount of interest that is being shown in the after market coils for 7000, it`s obvious that there is a market out there for coils other than 14'' and 19". I don`t take the 19" out much because I have had very little success with it and with my bad wrists it`s just too damn heavy, but Minelab did tell us in the early days of marketing the 7000 that they would be releasing a 11" coil down the track, and now there is another company that nobody has ever heard of making a huge range of coils that are lighter and have so far been very well received by the public.
What`s going on Minelab?
A couple of months ago I put out a call for the parts list for the WM12 because my original WM12 was taking forever to charge. At the same time I bought the replacement battery, I also bought some heavier charging cables because I have about half a dozen devices that all use the same cable. I bought cables that were listed as suitable for external hard drives and they were about 6 bucks each. Because I kept changing cables on different devices I don`t even know now what cables came with the WM12. Anyway, with the heavier charging cables my original WM12 now charges QUICKER than the newer WM12, so I don`t need to fit the battery. Maybe, if your WM12 is getting sluggish charging, it may not be the battery, it may be the cable breaking down. Just a thought. Dave
I really don't want to spend $150+ on a set of waterproof phones since I don't do a ton of water hunting.
Anyone tried these: https://www.ebay.com/itm/LS-PELSO-WATERPROOF-HEADPHONES-FOR-USE-WITH-MINELAB-EQUINOX600-800METAL-DETECTOR/273858263213?hash=item3fc33978ad:g:CIQAAOSwIbtb6pHb
By Jonathan Porter
Hi Bill, Salt is always going to be a problem, especially if you want to also achieve depth. Deeper targets are slow responses, salt signal kills slow signal responses. My advice on salty areas is to try your most sensitive modes first and go down from there, in this instance it would be High Yield, then General then Xtra Deep Normal before I changed any of my other settings.
Your Threshold is too low, stick to 27 especially if Audio Smoothing is in the Off position, I would also recommend using Semi Auto mode because Salt signal messes with the Ferrite Balance in Auto mode.
There is a huge difference in Salt signal if you go from Normal to Difficult, this also might have been a good option for you dependant on the ground in your area. A lot of people shy away from Difficult especially in quieter soils because there is a perceived depth reduction, however on Half ounce nuggets Difficult actually gives a better signal response than Normal does in any of the Normal modes (HY, Gen or XtraDeep).
Minelab introduced the Ground Smoothing mode in the last update, this mode was specifically designed for Salty ground conditions, essentially they are Motion filters so there is a depth reduction when you select either Patch or Salty mode so I tend to avoid them but it does smooth the machine out a lot.
Finally, having a controlled swing speed helps immensely with Salt signals, try not to suddenly vertically lift the coil as this exacerbates the salt signal immensely. To confirm it is salt signal just lift the coil from detect height to abover your head, as the coil transitions from your waist height to shoulder height you should hear a moaning sound, the level of salt signal is determined by how loud this response is. The other way is to place the coil in the air out in front of you with the coil parallel to the ground then rotate the coil from left to right and listen to the audio response, the greater the noise the greater the salt levels. This will help you to decided how aggressive you need to be in reducing sensitivity via the Gold/Ground type Modes or the use of the Ground Smoothing filters.
Hope this helps
Managed to get two hours in today before rain chased me home with the 17 inch Russian X coil.
Blew me away just how good this coil is ! I purposely picked a small area of State forest that I have flogged for the last 10 years, with all 3 different GPX detectors, with coils from 11-25 inches, the SDC, and even a QED. This spot has yielded many ounces of gold to me from 0.05g up to 33g. I had declared it " dead ", as my last 10 or so efforts with the standard GPZ14 and GPZ19 have yielded nothing more.
2 hours in today, nearly back to the car, and I get an obvious signal. This was slightly downhill from a small patch of small reef gold, in an area that I have literally smashed.
Coil was about 2 inches above the ground because of sticks and clumpy grass. Removed said obstacles and signal firmer. 4 inches in and I am in nice gravel, target now screaming, out pops what turns out to be buck shot. Bugger, but this is from a spot that I have NEVER managed to get a target in !
Moved about 10m along and same thing, another obvious target, once again coil 2 inches over the ground. Dug in and same again, 4 inches down in nice gravel, target screaming louder than the buckshot, out pops what turns out to be an 0.65 gram bit of reef gold ! I'll be buggered, I thought !
Rain then chased me home.
Coil was very sensitive, being able to pick up my 0.11g test piece at 2 inches. I tried knocking the coil against a tree a few times and no bump sensitivity. 17 round weighs the same as the GPZ14. All in all, a fantastic coil. Don't know what the Russians have done differently, but Minelab need to have a good hard look !
Further testing to come when our shitty weather finally breaks.