Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Stephen Allen
      I'm just wondering if this has been asked before ?
      When I purchased my Equinox 800 the shop told me that the multi-iq is not available when in gold mode, only 40 and 20 kHz. In the manual it if I understand it correctly it says that in gold mode you have multi, 40 and 20khz modes. My question is
      In gold mode is the multi, all frequencies 5, 10, 15, 20 and 40khz or is it only scanning 20 and 40khz in gold modes.
      Hope someone can set me straight
       
    • By sandiwilliams717
      so all you guys know your Detector? Or so you thought maybe or maybe so you thought?


      So lots of you may be asking or have been asking or are curious about which Detector is better and probably assuming the 800 is way better and stronger than the 600. Or which is better for the beginner? The Minelab Equinox 600 or 800? What Detector is more powerful? Therefore producing more finds and at better quality? Or are they in a nutshell the exact same Detector besides A extra mode ( Gold ), and 20 and 40 khz are available to be single frequencies on the Equinox 800 and not the 600. Does The Equinox 600 have 20 and 40 khz in multi frequency? And the 800 has more adjustable tone pitches in more tone brackets and recovery speed is more adjustable and iron bias as well. But are as I said in a nutshell are the same exact animal. Truly deep, capable of all types of metal detecting adventures, fully submersible and the actually find amazing finds. Whatever you buy make sure it's a Minelab Equinox. They produce. Just don't go about it like I did and dying to set up most advanced settings and trying to copy someone's program. Let that metal detector talk to you and you'll create a bond with it and only tweak it when you feel the need to be able to comprehend it better. It's preset modes are incredible and this detector is truly worth every penny.... Thanks for listening guys
    • By sandiwilliams717
      1) Anyone have any advice and Best settings for the Minelab Equinox 600 for relic hunting like civil war relics buttons stuff like that? 2) Also when coin shooting for silver coins and gold coins anyone have suggestions or find there conventional or unconventional ways and programs better to locate Silver and gold coins? Like notching out vdis, or running it in beach in a field similar to Neil Jones program? 3) Also best settings on the beach for jewelry?
    • By Curl
      "The proper threshold on hot ground, any ground type for that matter, is a nice and high full sound, stable and rock solid threshold that cannot be wavered on that ground type.. Allowing the highest sensitivity they can muster. 
      Causing lovely repeatable dropouts in the threshold on deep signals on heavy ground."
      Hello All.
      I have an old Minelab GT16000, and in the process of searching for Coils, came across a post(above) by "argyle" that suggested a completely different Threshold setup for some of the early VLF detectors including mine.
      Just wondering if anyone has used this procedure, as it is different to the manufacturer's instruction?
      Cheers. 
    • By Tnsharpshooter
      It has come to my attention when using my Apple iPad mini (with latest update btw) accessing manufacturer’s main site I cannot access support pages on site.  A work around for folks is to do a google search.  For example doing google search for Simplex+ manual one will see a good site that will get them to their destination for access to needed data.  It has been reported the same thing happens with use of android cell phone.  I have put a thread together elsewhere here in order to notify marketing rep Dilek of this issue.  http://www.dankowskidetectors.com/discussions/read.php?2,172246
    • By maxxkatt
      I have located two gold mines that I have access to after much research.
      one mine about 4 ft tall in the side of a hill and has a nice pile of quartz rock tailings pile. rocks are about 12" wide. Should I remove all of the larger quartz rocks to get  down to the smaller rocks before I hunt with my 800 using a six inch coil?
      the other is in the side of a creek bank about 2 feet high. No sign of tailings pile, so I guess just hunt the creek with my Equinox 800 and 6" coil in front of the mine and down stream and on both sides of the creek in case they had their washer equipment set up at that location.
      both sites are rather remote so should not be much trash in the area.
      thanks for any help.
       
×
×
  • Create New...