Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By garikfox
      I'm looking at the B&Z audio enhancer for the GPX, the one like JP uses.
      Is anyone using a B&Z and what do you think about it?

    • By Old Farm Hunter
      anyone know if these are good detecting headphones https://www.fleetfarm.com/detail/bounty-hunter-stereo-headphones/0000000203051?Ntt=metal+detecting+headphones&_requestid=2321948 or  do you know of a cheap pair that are good thanks
    • By kac
      My old headphones got all beat up over the summer plowing through the woods so I snagged a pair of Garrett Stow Aways for my Tejon. I was really surprised how good the audio really is on them. They do fit a little tight and are smaller but have a really great range of sound. Now I need to re-learn my sounds.
      Anyways I didn't spend much time out, maybe half hour or so and left the 10x12 coil which kills me in trashy areas but I did get a nice smooth hit on this little 18k rose gold ear ring with a few diamond chips 0.7g.  Was only inch or so deep nothing to brag about.

    • By Lonnie / Vero Beach
      I purchased an Equinox 600, 6" coil and 1/8th to 1/4th adapter.  It arrived on 08/19/2019.  The detector worked without headphones.  It worked with the wired headphones that came with it, the headphone icon appearing on the screen.  When I attempted to use the 1/8th to 1/4 Minelab adapter, that I also ordered to allow me to use my Sun Ray headphones, things went wrong.  Machine was fine, but with the adapter in place, my headphones were dead.  The speaker on the unit still worked.  The headphone icon on the screen did not appear.  I re-attached the adapter several times with the same result.  There was a problem somewhere. 
      Things happen.  It probably was nothing big.  I called Minelab America, expecting another adapter would be sent, or ____?  Minelab didn't answer, just a recording informing me my call might be recorded. I left a message.  Later that day I called again. Same recording.  I did not leave a message.  I did not leave a message the two times I called the next day, when the recording was still answering my call.  I called the dealer and he was, and still is, very responsive.  He provided the email for Minelab service and maintained contact with me.  I emailed Minelab about my problem on 08/20/2019.
      I made four calls to Minelab America and never reached a human.  I left a voice-mail message with my contact info, no response.  There has been no reply to my email.  Though the Equinox may be a fine machine, I can live without it and it will be a long time before I consider another machine from them.  I qualify for the Veterans discount, which made for a great price and was considering purchasing one for my girlfriend.  The machine was sent back.
    • By mn90403
      Does anyone know if an 800 will connect to a phone or any other Bluetooth app or device that records video or audio?
      It sure would be interesting to record directly from the detector.  I guess the best way is the old way of just putting the sound on the detector speaker and then capture the event that way.
    • By fredmason
      Apparently, my wireless pairing button does not work...
      I have tried every combination to get the thing to show...but, it won't.
      Detector on...
      WM on
      wm rapid blink on
      PUSH the wireless, water-proof button-NOTHING
      several Factory resets done also....
      The trouble shooting guide says to ….CONFIRM the wireless setting is set to on"...??? where is this setting?
  • Create New...