Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Lee C.
      Has anybody else noticed that the 12x15 coil doesn’t ground balance as well as the stock coil or the 6” coil? Or is it just my imagination?
    • By devilsrenegade
      The mxt hit a home run at an old ballpark recently with this 43 war nickel. Also found a wheat penny and some clad and a little trash. Funny thing happened on this particular hunt, I was heckled by a passerby in their vehicle who pointed at me and laughed out loud, don't know if he was laughing at me or my old White's detector . Anyway I didn't let it get me down and had a good hunt. Has that ever happened to anyone else on the forum ?  



    • By calabash digger
      Depth and unmasking...
       
    • By dewcon4414
      Heres one id like to see what others have found.    Today i was playing around on the beach with the Nox.   Havent had much time with it  so i thought id see how the F2 was working.    That got me playing around with disc.    What i noticed in disc ...... as i swung the coil it was knocking out the ferr like it should in disc....... HOWEVER i was getting these -1 and -2 iron blurps occasionally.  I also noticed it knocked out the TID for iron except those digits giving the blurps..... oddly.    Im an AM hunter on the beach.   What i did was ..... turned down the volume to 0 for targets 0 and below.    It seemed to work just like disc...... with two exceptions.   1.. you never got ANY sound from those -1 and -2 targets.   2..... the TID was still reading all the iron targets.    So.......out in the water i went hunting in AM target volume for iron set at 2.   Then id switch and go back...... doing it with disc....... then with iron volume at 0 using AM.   Far less noise from mineral...... but i got the same non-ferr targets just as clear.    I know people have asked if there is a difference between disc iron and turning the volume down to 0.   To me there seems to be some near target ID bleed that can create unwanted noise at that 0 disc point.
    • By Joe D.
      Hello everyone, 
       I'm recently new to the site, and was going through the threads, and can't find the one that talked about Equinox water intrusion! So I'm starting a new one! Several months ago i bought a silicone cover and battery compartment seal combo that seems to prevent the problem! But i can't find it on Ebay again! Hope you all will be more successful in locating this product! Here is a screenshot that i saved, and also a picture of the battery seal in place, and removed! I believe it came from the Ukraine! The cover comes with several silicone ties to secure any openings! So far it's worked well, but i have not dive tested! It would seem to me that the battery compartment is the weak link for water intrusion, other than the obvious wire entry points and caps! But this seals all points covered! Good luck and happy hunting!     Joe D.
       



    • By RobNC
      Does anyone know what other coils the Teknetics Minuteman is compatible with?
      Got one on the way for use as "Level 1 Investigator/Scout". This is going to be the little dude that I take to any new site first. It will be used to see how trashy an area is and remove any shallow items like clad coins or garbage before bringing in the XP ORX for deeper items. This little detector seems like it should fit the bill nicely for feeling out a place. It's simple enough to be fun, powerful enough to be useful, and cheap enough to be thrown into the vehicle as a workhorse. From all I've read on it and seen the detector appears to be fairly decent at getting things done without a lot of guesswork. Anyone here have one or have used this model before?

       
×
×
  • Create New...