Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By phrunt
      My new T2 arrived this week so I decided I'd take it out for a test run today, I haven't bothered detecting football fields before, it never really crossed my mind to do so especially small town football fields that barely ever get used.  I think the last time I even saw people on this thing was about a year ago and they were riding a horse 🙂
      I guess back in time it was probably a popular place and my results today show this.  This is going to be more of a picture story as the pictures tell 1000 words! 
      I started using the T2 with Mars Tiger coil and within two minutes of arriving I had my first coin, then another, then another..... it was nuts, coins everywhere and very little junk, I was finding nice old coins, possibly one of my oldest in a while too

      Silver 🙂

      1938 British Penny

      The T2 was getting good depth, easily hitting on coins with good ID's, another silver!


      1948 Penny -  Now NZ currency, not British like the older Pennies, we used some British currency until 1967. 
      Prior to 1933 United Kingdom currency was the official legal tender of New Zealand, although Australian coins and notes were also generally accepted.
      The first New Zealand penny was minted in 1940. The penny ran until 1965, when New Zealand stopped minting pre-decimal coins in preparation for decimilisation in 1967.


      I have no idea what this thing is

      This is the football field I was detecting, under the goal posts and along the end of the field had a good collection of coins,  I guess from all the diving with the ball and coins in the players pockets, I don't know much about football, probably the only NZ male who has no clue about the game 🙂

      My oldest find of the day, a British 1912 One Penny

      It was quite deep down but the T2 banged on it real hard with a solid ID.  At this point I decided I'd go home and gear up better as this place obviously has a lot of good old coins.  I was only using my T2 with Carrot and Lesche digging tool which was hard work with all the coins being so deep.    I wanted a bigger coil to cover more ground but there was no way I was going to strap on the 15" Teknetics coil to continue using the T2 as it weighs a tonne.  I opted for the Equinox with it's 15" coil  and almost straight away after turning it on, another coin

      1950 NZ One Penny.  I left the bit of dirt on the coil up the top it came out of, I love when you get the impression of the coin in the soil.

      Another silver, 1934 Shilling

      This is the hole it came from, I always recheck my holes and I'm glad I did, another target in the hole, then another... this was crazy


      3 Silvers in the hole so far, 1934 Shilling, 1934 Shilling and a 1946 Sixpence, I was sure this was it but I did another check and off to the side of the hole, ANOTHER SILVER

      Another 1934 Shilling, 4 silvers in one hole, incredible!   Someone had a bad day.

      1964 Sixpence... the coins just kept coming, all old ones.  No longer are they made of silver in 1964...

      Nice and deep though
      +++++
      My first modern coin, a $2

      But look how deep it was, it was deeper than a lot of far older coins.... weird!

      Another two in one hole, just one cent coins from back when NZ had one cent coins.

      Another coin leaving a cool impression of itself in the soil, just a one cent I think

      It sure a lot of ground to cover, I'll be at this place for weeks... plenty more coins to find I'm sure.  Time to head back to the car, with my coil to the soil.

      Another for the road 🙂 Double sided impression on the soil with this one.  I couldn't possibly put up a photo of every coin find as there were just too many, all in about 3 hours detecting.

      The good stuff

      The bad stuff... not a bad ratio, good stuff far outweighed bad stuff, unusual for me.... I'll be back there tomorrow.... and the next day.... and the next day 🙂
       
    • By RobNC
      Ok.. I've encountered some really tough ground conditions in a lot of areas that I hunt regularly. We are talking the red dirt with little shiny particles all in it that also has iron mixed in.  My Teknetics T2 struggles in it. My ORX struggles but will fish things out if you can stand the machine gun blips. I keep reading that the Equinox is more suited to deal with this. Now, I tried an Equinox 600 and found it to also cut up on certain plots of land, and the particular one I had was really horrible in iron. The tones also played tricks on my ears and I found the bleepity bling like sounds to confuse my caveman brain. The ORX has been a decent detector for me, and helped me rehabilitate myself after a car accident this year. However the tones in it are so close together that my ears can not often discriminate high from mid tone. There is no way to adjust it.
      Let's fast forward to today. The Equinox 600 does not have the adjustability of the 800 concerning tones, or at least that is my understanding. I walked away from my Equinox 600 ticked off that I could not seemingly bond with it. In my mind there was a single thought - how much better would the 800 be? For those of you that have especially used the XP ORX or the Teknetics T2 and also used an Equinox 800 I'm asking you, does the Equinox 800 do better in contaminated soil than my current 2? It is possible I will trade the XP ORX towards the EQ800. Would that be a "step-up" in capabilities? I've always found this forum and the people here honest and fair with no BS. So I ask you, would it be worth the extra money, hassle and such to truly give the Equinox 800 a chance even though I had a 600 and it didn't quite suit me. It is entirely possible the 600 I had may have had a fault of some type for all I know. And what of depth with the EQ800 vs the XP ORX?
      Reaching out to everyone in the know.
    • By wltdwiz
      hi all
      just got me a simplex & gotta tell you they named it right
      its a simple to run hi teck detector with lots of features & its got some bite to it..
      took it down the what i call the beach from hell  lots of bottle caps & nails & hot Arizona ground
      ground balanced at 87 & ran it in park..
      i would love to tell you that it dident pick up bottle caps but its a dd coil so it hits them but up just bellow the zinc penny range they could be dealt with hope they get a concentric out soon..
      the simplex has a wide spread on the discrimination nickles 22-23 coins 79-90 pulltabs in the middle.. hits hard on nickles..
      she found me this little beauty on a heavily worked beach in a mass of iron .. rang in at 19-20
      10 k 2.3 grams
      im happy  i have a new friend..
      Thanks makro for a great detector

    • By Steve Herschbach
      Complete tear down with good circuit board photos here.

    • By Happa54
      Has anyone increased their 50 tone pitch from its default setting of 20 to max of 25?
      I want to receive the highest pitch that I can to closely resemble the sounds of the FBS machines, etrac, explorer, safari. I don’t quite get those flutey FBS sounds I would like to hear but the adjustment is as good as it’s going to get, I think. I’m assuming this shouldn’t change anything in areas of performance, because all I’m doing is simply increasing the audio pitch up and down the TID scale. Or is there something else to this once you go off of default settings?   
      I thought I’d put this scenario out here to hear feedback from those who are hunting 50 tones set at a higher pitch opposed to its default setting of 20.
      I appreciate your feedback.
×
×
  • Create New...