Jump to content

Video - Finds Made By Le Jag With Pulse Detectors


Recommended Posts

I’m not trying to pour cold water on things but it is quite difficult to determine the original depth of the ring....in liquified sand, the ring will continuously sink to the lowest point created by the several attempts to dig it out......just sayin’ 👍

A bit of detective work........If you look at the video at around the 7:35 mark, you will notice that the “likely” maximum depth can be seen where the scoop is buried prior to retrieval....where the steel meets the yellow handle. I would guess the original depth is probably no more than 12” deep and this is allowing for some angle penetration by the point of the scoop but NOT allowing for the likelihood of the ring getting knocked down by all the digging (and some off centre digging too). I  like your enthusiasm PPP...... 😁

  • Like 2
Link to post
Share on other sites

5 hours ago, PPP said:

Oh my GOD!!! what a depth!!! INSANE.  20 gram ring!!!!! you got to be kidding.That was awsome.My deepest targets vwith the Nox is around a 12inches and with my ATX aound 15.I think you recovered those targets between a range of 18 and 20 maybe deeper.Greate jobb LE.JAG with the video and please share more videos if you have any more!!!!!!!!! I WANT AN AQ!!!!!!!

Keep on dreaming  we still have to wait a long time it seams, there is only one production model sold, and we all know who owns it.

Link to post
Share on other sites

And it’s back with Fisher 😳

  • Sad 1
Link to post
Share on other sites
7 hours ago, TerryinHawaii said:

LE,JAG, I noticed that some how you pickup the object found with your rubber boot.  How do you do that?

I don't understand your question Terry
  to point the target ?
I use the edge of the coil / as effective a Pinpointer

Link to post
Share on other sites
6 hours ago, vive equinox said:

Footing the sand is the faster way to recover the targets... 

We dont ear the comments and the sound of AQ in the vidéo... except " viens voir " " la vache " 😂  

the nox dont have any signal with the ring ? 

Did the AQ was able to take this ring at the initial deep in réject mode ? 

Il y avait trop de vent , c'est dommage , et si on entend bien le Oh la vache , c'est par ce qu'il crie 🤣

pas de son au premier passage pour le nox, il l'a accrocher après un léger coup de pelle

je l'ai pas essayé en discri , j'avais fait plusieurs plomb avant

et le son n'était pas parfait / pas mauvais , mais pas top ... (bague tête en bas , je pense..)

Link to post
Share on other sites
5 hours ago, PPP said:

Oh my GOD!!! what a depth!!! INSANE.  20 gram ring!!!!! you got to be kidding.That was awsome.My deepest targets vwith the Nox is around a 12inches and with my ATX aound 15.I think you recovered those targets between a range of 18 and 20 maybe deeper.Greate jobb LE.JAG with the video and please share more videos if you have any more!!!!!!!!! I WANT AN AQ!!!!!!!

with good weather conditions, no wind
silence / we can go down to 20 '
there, I'm about 15 or a little more ..

 

 

Link to post
Share on other sites
2 hours ago, Tony said:

I’m not trying to pour cold water on things but it is quite difficult to determine the original depth of the ring....in liquified sand, the ring will continuously sink to the lowest point created by the several attempts to dig it out......just sayin’ 👍

A bit of detective work........If you look at the video at around the 7:35 mark, you will notice that the “likely” maximum depth can be seen where the scoop is buried prior to retrieval....where the steel meets the yellow handle. I would guess the original depth is probably no more than 12” deep and this is allowing for some angle penetration by the point of the scoop but NOT allowing for the likelihood of the ring getting knocked down by all the digging (and some off centre digging too). I  like your enthusiasm PPP...... 😁

when i put the disc in the water
she just moved / I can't hear her anymore
until then, the sound does not vary / it is still in place

my gamate, from the tip to the yellow handle
is 45 cm = 17.71 '
it's hard to say how much she was
and that’s not the purpose of the video ..
but it was pretty deep

also note, that the ring is a small diameter
it does not pass to my little finger
larger diameter / good weather condition
see a lower carat (18k this one) = easier to detect
  we can largely hope 20 '

  • Like 3
Link to post
Share on other sites
1 hour ago, TerryinHawaii said:

LE.JAG,  in this video after you have pin pointed the object.  I see your foot raising up and then you have the object in your hand.

you talk about the button
I don't see it with the mud on the surface
  i hear it
and I point with the disc and the tip of the foot ...

Link to post
Share on other sites

Translation problems. I see what Terry means. In the video it appears you are lifting your leg up as if you have somehow picked the ring up with your toes. You do not appear to bend over at all, so in the video it looks like your are using your leg and your booted foot to somehow pick the ring up and put it in your hand.

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By vive equinox
      Hello 
      have you seen this video ? 
       
       Lot of iron ... 
      I don't understand English very well, but I have the impression that he says that there is no variation in the audio. and that there is no double beep on the bobbie pin .it is sold to find under iron, but I see it only finds iron. 🤔
       
       
    • By Steve Herschbach
      A reference collection of threads about the Fisher Impulse AQ, grouped into rough categories.
      Fisher Impulse AQ Limited Launch & Buyers Disclosure
      Fisher Impulse AQ Ltd Owner's Manual
      Official Impulse AQ Limited Color Flyer
      Official Facebook & Website Links
      Fisher Impulse AQ Ltd Data & Reviews
      Fisher Impulse AQ Data & Reviews
      Fisher Impulse Gold Data & Reviews
      Genuine Fisher AQ Ltd Spare Battery Part Number & Price
      Fisher Impulse AQ Rod Length Measurements
      Impulse AQ Rod Extension
      False Signals From Coil Connector
      Fisher Impulse AQ Discrimination Explanation
      Impulse AQ Audio Responses
      Impulse Tones & Discrimination Notes
      Impulse AQ and "No Holes"
      Impulse AQ and Mineralization
      Fisher Impulse Small Gold Sensitivity
      Impulse AQ First Field Report
      Homemade Batteries For Impulse AQ
      More On Homemade Batteries
      Homemade Headphone Dongle / Add Wireless
      How To Relax The Headphone Cable
      Fisher Impulse AQ - The Next Version
      Quick Link To ALL Impulse Threads - Latest User Reviews and Reports
      Fisher Impulse AQ Calibration Information

       

    • By Mxt Sniper
      I was wondering what features in the new Impulse Gold detector you nugget detectorists would like to see in this new  machine to make you buy? For myself the lightweight part is very important, I would also like to see solid coils for ease of use in uneven terrain, and I would like to see gpz type performance on surface grain size gold and would like to see gpz type performance on 1-2 gram nuggets at depth. Not real concerned about deep large nuggets. Auto ground balance would be a huge plus too. Perhaps the 7 usec timing will be enough to produce gpz type performance on grain size and gram size gold. Time will tell I guess.
      I don't expect Minelab will be sitting still with regards building a lightweight nugget detector flagship model, sooner than later probably.

    • By Steve Herschbach
      No, I actually do not know what the new Fisher Impulse Terra will be called. It is just that I doubt it will be called the Impulse Terra and Impulse AU seemed like a good pairing with Impulse AQ. Probably wrong but I can change it when we find out for sure. The main thing is this dry land gold prospecting version of the Impulse AQ is 99% certain at this point, so I wanted to start tracking it as a separate model with what is know about it so far. Which is not much. WE know testing is taking place with an 8" coil but do not know for sure if that will be the stock coil or not. It would be a good choice for small gold but not good for covering ground or for larger deeper gold. OK though if that's what they go with. Presumably a 12" coil is a possibility as stock or as an option.
      It will have to ground balance, and it may or may not have ferrous rejection capability. I personally hope it does, as some areas are full of ferrous trash and missing some gold is worth it to be able to use a PI in those areas.
      Anyway, will be updating as I find out stuff. I'm kind of more interested in the beach model myself as i have nugget detectors already, but it will depend just what the feature mix is that will swing me one way or the other.
      Fisher Impulse AU Specifications & Data

    • By Steve Herschbach
      Fisher Impulse AQ Ltd Owner's Manual, 3.49 MB pdf file, 36 pages
      Fisher Impulse AQ Ltd Data & Reviews
      First Texas (Fisher) Forum
    • By Steve Herschbach
      Fisher Impulse AQ Ltd Owners Manual - Download Here

×
×
  • Create New...