Jump to content

Recommended Posts


What an awesome new patch to find! Gives us all some hope while we endure the many skunked days/weeks looking for new areas! 

  • Like 6

Share this post


Link to post
Share on other sites

The first thing that I noticed was that all of the Nuggets were on the west side of that main wash.  I would have to believe that there should be some good nuggets in that wash too. Maybe it was just to deep for the detector.   Awesome mapping! (And of course....nugget finding)

  • Like 2

Share this post


Link to post
Share on other sites

Great job of getting out and detecting 

Share this post


Link to post
Share on other sites

Oh yes I recognize this area,, I was there about 20 yrs ago and may have dropped a few pieces of trash... sorry about that,,,, but I did fill all my holes back in so well you didn’t see them😂🤠

  • Haha 3

Share this post


Link to post
Share on other sites

What a wonderful experience to share with your wife, first of all…It looks as though you are highly organized as far as keeping track of what you are doing and what you have found…working outside known areas is time consuming and most times unrewarding. That fact that you are willing to put your time into it is encouraging. No wonder you have success. Thanks for showing many of us what many will never see but hope to find.

  • Like 2

Share this post


Link to post
Share on other sites

Awesome mapping work! I wonder what some drilling would reveal?

  • Like 2

Share this post


Link to post
Share on other sites

I almost always found nuggets when I wandered away from the groups... I am sure there are plenty of patches and stray nuggets waiting for the willing prospector in Oz.

fred
 

 

  • Like 3

Share this post


Link to post
Share on other sites

I can't help wonder what's below the surface layer if you got a kilo with a detector!  Very good job on the mapping.

  • Like 3

Share this post


Link to post
Share on other sites
47 minutes ago, fredmason said:

I almost always found nuggets when I wandered away from the groups... I am sure there are plenty of patches and stray nuggets waiting for the willing prospector in Oz.

fred
 

 

There’s no gold left in WA it’s all over in the Southeast mate!!!!!

Just ask al the whingers  at the caravan  parks  😂

 

  • Like 1
  • Haha 4

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By madtuna
      Found a nice little run a couple of days ago, 2 days in a row just over 1/2 oz  each day and another 23 grams this morning.
      Here's a pic of this mornings total....

      I don't film many digs anymore, but the bigger chunk had a bit of depth. I was hoping it would be deeper and bigger...but alas, not to be, it went just under 10 grams
      https://www.youtube.com/watch?v=qpUIZp0f7zQ
    • By phrunt
      I had my first outing with my GPZ about a week ago with JW, my back was still terribly sore at the time from an injury so I wasn't really doing well and had trouble digging targets, and we were in terribly heavy rain so I was off my game.  I went back to the same spot today, the weather was much better, in fact it was far too hot for me.  My back has improved a lot, I lasted about 3 hours which I thought's pretty good, my longest detect since I did my back in.  This particular place I've always called my Nemesis as I could just never do well there.  I've been there probably 25 times and only found gold three from memory.  The first time with my Gold Bug Pro which was 1 bit, then the QED with 12x6" X-coil which got 1 bit, then the GPX with 10" X-coil which got 1 bit.  I've never got a bit with the Nox or Gold Monster here even though I've used the Nox the most I'd imagine and I'm the most comfortable on it feeling I can use it pretty well.
      I had a lot more faith in myself today as JW has done very well here with his GPZ and 10" X-Coil so now we were both driving the same machine surely I could come away with a piece.
      I threw my little ferrite super magic ring on the ground and waved over it, no response unless I rubbed the coil on it so maybe I don't need to do that anymore after doing my Quick start procedure the other day so I just got stuck into it.  I've had a few skilled operators suggest I use Manual instead of Auto or Semi Auto, that made sense to me with our mild soils here so I was in manual, I raised and lowered the coil and had no response from the ground so I assumed that I didn't need to do anything so I just got stuck into detecting.
      I first tried all the mountain goat one gust of wind and you're dead terrain, I get a bit wobbly detecting this stuff as I'm not so good with heights.
      My first target was a shotgun pellet.... not unexpected, there are many of them around here....

      That's good though, it means the detectors working well 🙂  I'm not used to the target noise of the GPZ on these small targets yet, bigger targets sound similar to the GPX but these small things behave differently, it's sort of a wobbly noise, different to the GPX.
      I kept going, detecting closer to the cliff.....

      Scary!  I did get a target in this area, it wasn't on the surface as it remained after my first scrape and moved on the second, unfortunately, a tiny little bit of some sort of junk

      I was super impressed with the sensitivity of the 12" X-coil getting these tiny little targets, Gold Monster size bits of junk.

      I really thought I had a nugget in this photo above, this was just before my dig..... turned out to be another shotgun pellet stuck in the schist bedrock 😞
      Now the sun came out, it was terribly hot and I was frustrated looking at the nice cool water below me while I'm up here sweating badly wanting to jump in it to cool off, I really struggle in heat so I moved away from the cliffs and jumped in my car to go back into the terrain JW found his bits last weekend, it's very close by and I could have walked if it wasn't so hot and my drink had run out already 🙂
      This next area has lots of good bedrock and didn't seem as junky with the pellets, the issue here is the power lines, I dropped my gain down to 14 from the 20 it was on previously so the machine ran nicer as I couldn't put up with the power line noise as the spot with the bedrock I wanted to detect was basically under the power lines.  As I detected further away from them I cranked my gain up again and as  I got closer lowered it down, quite easy to do on the GPZ as you just leave it on that option and adjust as necessary.

      Why do they always put these right where the best bedrock is... I'm sure they did it on purpose. 

      Nice bedrock though... I could see a number of fresh looking dig holes around, I suspect JW's handy work, he was good though, all necessary ones were back filled. 😉  The funny plants are getting annoying, there is a plant that looks like that if you grab onto it and try rip it out it spikes you to death so I wasn't game to touch them, just worked around them.
      I noticed an area with a lot of dig holes but it was virtually right under the lines, I figured there is no point doing that area but the dig holes seemed to go off in a direction so I instead went down rather than follow the digs and it was only 15 steps from a dig hole and I had a target, quite faint but very obvious.  At this point my gain was on 12 to calm down the power lines and I had the detectors volume on 4 as the Steelphase SP01 was attached to the Wm12 and gave me all the volume I could ever want.  I did notice if I got between the WM12 and the detector sometimes the audio dropped out for a few seconds and picked up again if I moved, it seems it doesn't like passing the audio through my body, is this normal or is my WM12 a lemon? I would think it's pretty normal passing wireless though your body.  I tried changing frequencies but made no difference.  I might just use my Quest Wirefree mate as it doesn't seem to do that, similar thing to the WM12 anyway.
      I dug the target thinking it's probably going to be another shotgun pellet, it was doing the same wobbly type noise, hard to describe the noise....  I did a scrape with the pick and it was still in place, getting hopeful but the bedrock was quite shallow so I just started taking scoops out with my plastic scoop and waving them over the coil, narrowed down a target and it was a bit of gold! Awesome, my first GPZ gold, a tiny little thing....  I rechecked the area and the exact same noise was still there, it sounded like I never even dug the target.  So I kept scraping it out and waving the scoop over my coil, a few more scoops with and I had the target. Boom! Another bit of gold.  Two from one hole! this doesn't happen to me often.

      The spot I got them!

      You can see the detector sitting in the spot still where I got them and if you look up the damn power lines!

      The two little guys! 🙂  I was done for the day now, it was too hot and my back was pretty sore.  I had a goal of finding a bit of gold then I was going to leave, it's lucky it happened when it did as to clean the little bits I had to use the last drop of moisture in my body, my spit came out like pasty thick molasses to clean them.  I stumbled back to my car and was lucky.  I found a few fruit trees on the walk that were covered in fruit.  I got my fluids up eating a bunch of apricots and a few plums.


      I picked a few for the road too

      Washed down my KFC with them.
      Time to head home, my wife had sent me a text message while I was detecting saying I've had a parcel arrive, it was the two coils I've ordered to start exploring for some new ground, I wanted some ground coverage so I can explore and find some ground JW hasn't already done so I think this is partially why I called it quits so early in the day, I wanted to rush home and see the new coils 🙂


      15x10 and 17x12"
      I've tested both of them out already in my backyard, both detect my bits of gold I found today, that means they'll be my perfect exploring coils.  I hoped they'd both still have the sensitivity to small gold which they do.  I shouldn't say my bits of gold either, my wife confiscated them off me, valentines day gift she said as its valentines day here today 😄  It's the first nuggets I've given her so that's OK.
      Time for the weigh in.


      Not too bad! Happy with that.  I really like the 12" coil, it's going to to be my everyday use coil.
    • By idahogold
      Cheers All from 20f frozen Idaho! Enjoy!!!😆
       
    • By Jesse
      So I finally got a metal detector it's on its way the equinox 800. I also ordered the 6-inch coil. I'm going to post a picture of a specimen of gold my cousin found, he found it while working on a little creek that was known for gold back in the day. He found it without a metal detector just basically by chance looking down and picking up a piece of quartz off the bedrock. I know exactly where it is so I'm going to go to that spot. My question is should I literally just detect the whole Creek? There's also tailings piles on that Creek as well should I hit everything like a madman? 

    • By nugget hunter nz
      So took the gpz out for couple days were I hunt managed to find out that my extra waterproofing didn't work after 20 mins of first day with xcoil so was back to std 14 on day to all and all we had good trip pulled 5 grams for 2 days and 3 nice bits including this one 
      It was all creek hunting and was defanitly impressed the the zeds depth 

      Just hoping with few days sun in a bag rice the xcoil will work normaly again.. Guess I will have to wait for nf coils to be realesed for water ones as the std 14 took on water to even tho they ment to be submersible to 1 mtr 
    • By Steve Herschbach
      I have been doing a lot of what I call “blue sky prospecting” where I get out and hunt areas not known currently as “nugget hunting areas”. There are a number of well known areas in the western U.S. that people converge on and hunt repeatedly year after year. The attraction is that although these areas are well hunted, detectable gold is known to exist and proficient nugget hunters have a high chance of finding at least a little gold by visiting these locations. Going to areas that have no real history of producing gold nuggets with a metal detector has however a much greater likelihood of producing no finds at all. It is just the nature of exploring off the beaten path and for people with limited time it is very hard to choose to hunt an area where nobody has ever detected gold before and where you will probably find no gold as opposed to hunting known productive areas.
      The problem with well known areas is that they are well detected, so the best one can usually expect is to eke a few missed nuggets here and there from these places. I do have more time however to apply to the search, and so have made looking for new “patches” an integral part of my prospecting program. I seek out and hunt outlying unclaimed areas peripheral to known gold bearing areas for at least half my time in the field, falling back to known locations now and then to find at least a little gold to boost morale and help pay for beans and gasoline. Going many days at a time without finding gold takes a lot of patience but the hope is that eventually I will make an exceptional find in the form of a virgin patch that makes up for all the hours of non-productive hunting. I say non-productive, but I never come away feeling like that is the case. I always learn something, even if it is to the negative, about my detectors and the gold itself – where it is and is not found.
      On to the hunt. I was exploring an area in northern Nevada where quite a lot of past prospecting is apparent in the form of pits, trenches, and small prospects. Lots of quartz veins exposed and surface quartz. Nearly all the prospects looked to be "busts" where the initial trenching or pit digging was abandoned with no further work done. Some showed a little more work that indicated that there was possibly at least a little positive results - or just an overly optimistic prospector. I have pretty much abandoned day trips and "hit and run" type detecting in favor of parking my posterior in one camp location for days (at least) and methodically exploring the surrounding area. That being the case I decided to spend a minimum of three days hunting this area to see if I could scare up any sign of gold.
      I of course relied heavily on my GPZ 7000 for a lot of the detecting but also got in lots of hours with the Gold Monster 1000 and Garrett ATX. A lot of the ground featured shallow exposed bedrock and so depth was not the issue, and the GM1000 was great for these areas and for checking quartz around the old prospects. I did get a couple pieces of quartz that gave non-ferrous beeps. I broke one and it appears to be a copper mineral of some sort that signaled in that one. Might be the same for the other but I have to check it out still. It sounded better so I decided not to just break it but wait until I could scan it with my Falcon Gold Probe and examine it better before taking action.

      I was up early to beat the heat and so getting in lots of hours. Great looking ground but other than a bullet now and then nothing much to report.
      Sometime into the second day my GPZ started acting up. It seemed like extreme EMI and nothing I could do would make it quit. Even my last resort of a full reboot did not eliminate the noise. So I broke out my Garrett ATX that I have along for backup, which really needed doing anyway as I wanted to get more hours on the new coils. The new 11" x 13" DD coil is enclosed to shed debris, center mounted rod for better balance, and most importantly, resistance to knocks and false signals that is at least as good as my GPZ if not better. A side bonus is salt ground and hot rocks the GPZ sees I can tune out completely with the ATX. I also found the ATX with slightly smaller coil to be a better option in thick grass and weeds than the GPZ due to the 13" x 14" GPZ14 coil wanting to float on top of the grass to a slightly higher degree than the ATX 11" x 13" coil. Not a huge difference but just enough to help.

      Still, a day of hunting with the ATX also got no gold. The next morning the mystery interference was gone - either the GPZ healed itself or it was a temporary but strong EMI issue. On the third morning I therefore went back to the GPZ 7000. This was going to be the last day although I was really liking the look of the ground. Finally, in early afternoon I got a lone signal in  a clay layer in a shale zone, and down near a foot out popped a 2.39 gram nugget!
      I have to admit I was real pleased with this nugget, found I have no idea how far from where anyone has found a nugget before with a detector. I proceeded to grid the area for a couple more hours and my initial excitement slowly dropped into "here we go, yet another lone nugget" all by itself. Heat and lack of water caught up to me so back to the truck for refreshments. Then when time came for another go - the weird EMI issue was back. I have not run into this in the couple years I have used the GPZ in northern Nevada, so it was concerning me that perhaps the GPZ had some sort of intermittant issue. I broke out the ATX again to finish out the day with no more nuggets.
      Still, that made another couple days mandatory. The EMI thing went away again, and has not returned since (fingers crossed). A couple more days detecting however did prove that one nugget was a lone ranger. I decided to make the move to an old patch to see if I could add at least a little gold to the vial before returning home.
      I got spoiled the first couple seasons here as drought conditions made for lots of bare desert. Now, with all the rain last winter, some areas are now thick with grass and weeds that make detecting very difficult if not impossible. The ATX does do a bit better in this stuff than the GPZ and so I hunted the weeds with it for a couple days. Still lots of targets but they kept turning out to be trash, until I finally found a 1.5 gram nugget in a drywasher tailing pile. I decided to leave the next day, but had time for a morning hunt. I was just ready to quit when a nice 2.19 gram nugget popped out of the ground.
      A week of detecting and only three nuggets, but that is to be expected when out trying new ground. What was odd was only three nuggets but all three were at or over a pennyweight in size, with no small stuff, just over 6 grams total. Go figure, but it left me actually satisfied with the trip as far as gold found and lots of new country experienced.

×
×
  • Create New...