Jump to content

Dealer Sale Steve's Two-piece Carbon-fiber Lower Shafts For Garrett AT And Ace-series (both Black And Colored Options) Now Available!


Recommended Posts

 kac -- 

OH MY.  Yep, time to find out if you have a coil problem, or a problem with your recently repaired unit.  

Take your time, get things figured out!  If, once the dust settles, you would like a shaft, just drop me a note, and we'll get you taken care of.

Thanks!

Steve

  • Like 2
Link to post
Share on other sites

Will do!

  • Like 1
Link to post
Share on other sites
  • 3 months later...

Curious if your lower shafts will fit the new Apex?

Link to post
Share on other sites

kac --

I am trying to get confirmation on that, but I believe that Garrett is using the same shaft system for the Apex, that they do for the Ace- and AT-series units -- so my tentative answer is YES, I do believe my Garrett shafts will fit the Apex.  Once I confirm this, I plan to order tubes in a couple of different yellow colors, also, given the Apex color pattern (black and yellow), to add to my color options.  I will attach a picture of a couple of these yellow tubes I'm working with...

THANKS!

Steve

 

 

yellow-tubes-for-apex.jpg

  • Like 1
Link to post
Share on other sites

The gold braid would look good on the Apex, hope they fit.

Link to post
Share on other sites

kac --

I agree, I thought so, too.  The solid yellow color there, is actually a tube I am experimenting with for a shaft for an MX Sport -- that's the exact color of yellow used on the Sport.  I'd need to get the exact color of yellow used with the Apex, if I wanted to precisely match the Apex color scheme.  However, like you said, that gold braided one seems like it would look good, with the Apex.  Obviously, some waiting (for release of the unit) and some experimenting are in order.  However, as I said, I am pretty confident that the shaft system on the Apex is the same as on the Ace/AT, and so I should be able to offer shafts for the Apex, as soon as it is released.

Thank you for your interest!

Steve

 

 

  • Like 2
Link to post
Share on other sites

You could give Garrett a hollar they may tell ya.

Link to post
Share on other sites

kac --

I have been trying to get in contact with the production supervisor at Garrett.  I've called, but haven't reached him yet.  I'll keep trying...

Steve

 

 

Link to post
Share on other sites

I would like to add to this post that Steve’s detector rods are, hands down, the best products as well as his awesome customer service. I love my Blue lower rod from Steve.

Link to post
Share on other sites

BeachHunter -- THANK YOU for the endorsement!  It's very much appreciated, sir!

Steve

Link to post
Share on other sites
  • Similar Content

    • By Jim McCulloch
      I am closing out the last of my gold Master GMT and 24K coils and coil covers. All of these are absolutely brand new, never mounted on a rod. Each coil comes with a brand new coil cover. All prices are postpaid. GMT Sierra Gold Max $120. Two are available. GMT 10 x 6 standard Double D coil $120. One available . 24K 14 x 8 coil, $200. Two are available. Individual coil covers 10 x 6 oval GMT $11. The Flat 6 in round coil for the 24K and GMX $11. The 6 by 4 shooter oval coil $10. I have several of each of the ladder coils you can contact me at 760 401-7514.
    • By Gerry in Idaho
      As a dealer, I have taken many detectors in trade and with the new GPX-6000 coming soon, I'll probably be taking more gold detectors in trade from my 25 yrs of customers.  Here are some parts I figured is time to start clear up.  I have a variety of Upper and or S rods for different models of detectors.  Many folks use S rods for better ergonomics.  Some folks have worn out there old rod and need a new one.  Others just might want an extra one to look good when they trade their detector?
      I'm asking $35 shipped no tax for 1, $60 shipped no tax for 2, $85 shipped no tax for 3, $100 shipped for 4, or $120 for 5, or $150 shipped for all.

       
      Anyone looking for the black metal upper straight shaft for Minelab GP/GPX, I have some.    Also have non metal lower shafts of a variety lengths for the GP/GPX.
      Even have a few non metal carbon fiber upper shafts for GP/GPX (those were my favorite) as they are lighter and no metal.
      Have a few swing arms in the stash as well.
       
    • By Gerry in Idaho
      As a longtime follower of Detector Prospector and active member sharing stories/finds/knowledge, I might as well start taking Pre Orders and give those who are new to the game, a name/place you can have confidence in dealing with.  We all sell at the same price as Amazon, but a few of us like Rob, Doc and myself offers what mail order and eBay do not.  I don't care if you get free stuff, it won't make you a better gold hunter.  
      Those of you know don't know me just Google Search www.gerrysdetectors.com and you'll learn plenty.  What separates my Field Staff and I from other dealers, is the knowledge we earn while in the field and share at the Field Training Sessions we provide.  I've been using/selling Minelab detectors for 20+ yrs and what keeps me going is passion.  Some have read of my adventures to Alaska, England, Australia, Italy, Bahamas, Mexico and all over the US as Metal Detecting is me.
      I'm a US Marine VET myself so if you are a VET, I'll be happy to offer the full 15% discount for the new GPX-6000.
      You want to see some success videos or my Field Staff Experts and I sharing knowledge, go to the videos on my website www.gerrysdetector.com
      Is the GPX-6000 the detector for you?  How about a GPZ-7000 or SDC-2300 and what are the differences?  For some, why should you maybe start out with an Equinox 800 or Gold Monster 1000?  Lets have that conversation and find out before you pull the trigger.
      I don't have a regular job and sell detectors on the side, my only income is selling detectors, adventures and helping fulfill dreams.
      Call me up, lets talk and if we think the GPX-6000 is for you, I'll put your name on the list.  If you feel any other gold detector is in your eyesight, lets talk about it and compare the Pros/Cons of each.  After all, I sell near 200 different models of detectors.




    • By Gerry in Idaho
      DETacc Super Sound Signal Enhancer.

      Left one fits all SD-2100 and 2200 series, GP-Extreme, GP-3000, GP-3500 series. It will work on GPX models, but you need to purchase the adapter plugs for the 4000 and 4500. Easy to use and operate with only one knob, used for Volume Control. Retailed for $175 and you get it for $55 shipped.
      Right one will go to the newer GPX series, including the GPX-4000, GPX-4800, GPX-5000.  It's the 5 pin were as the older version SD/GP is the 4 Pin.  I want $65 shipped.
      I'm very well known on DP.  Call Gerry at www.gerrysdetectors.com

    • By steveg
      Greetings!

      This complete, high-quality, lightweight shaft system for the Equinox consists of:

      1). A 35 1/2" long carbon-fiber upper shaft, with four cuff adjustment holes, and one hole for the control-box handle (located in the same positions as on the Minelab upper shaft section). This upper shaft replaces -- as a one-piece section -- both the middle and upper sections of the stock Minelab shaft;

      2). A 26" long carbon-fiber lower rod, including spring-button clip (the same lower rods I've been selling for several months).

      The following pricing applies to several basic shaft options...

      1. Upper shaft section ONLY (no lower rod), regular end cap … $79 plus shipping

      2. Upper shaft section ONLY (no lower rod), threaded butt-end and threaded end cap (to allow compatibility with the threaded counterweight system) ... $89 plus shipping

      3. COMPLETE shaft system (upper shaft section PLUS 26" lower rod), regular end cap ... $129 plus shipping

      4. COMPLETE shaft system (upper shaft section PLUS 26" lower rod), threaded butt-end and threaded end cap (to allow compatibiility with the threaded counterweight system) ... $139 plus shipping.


      All of the above shafts can be customized in various ways, per customer preference (rod length, hole locations, etc.) Optional spring button holes (to facilitate use of the lower rod spring button) can also be included in any of the upper shaft options above, for an additional $10 (the button holes are not REQUIRED, on my shaft, due to the strong/secure clamping cam lock system that is used with these shafts, but are available as an optional inclusion).

      As alluded to above, an optional counterweighting system is also available for these shafts, to alleviate the "nose-heaviness" many Equinox users have noticed. The counterweight -- short-lengths of carbon-fiber tube, filled with small bags of lead pellets, and which screw into a threaded insert in the butt-end of the shaft -- can either be packaged with a shaft system, or purchased separately later, as an add-on accessory. The tubes are custom-built to each user's desired weight/length, and additionally, the weight of the tube can be adjusted at any time, via access to the internal weighting through a threaded end cap.

      Empty counterweight tubes (with the customer supplying the weighting) ... $35 plus shipping

      Weighted counterweight tubes (built to customer specification) ... $45 plus shipping

      Finally, I have created several documents to provide more detailed information regarding the shaft system itself, including counterweighting and how to choose the right weight for your situation, the "button holes vs. no button holes" decision, etc. I can provide these documents to anyone who requests them, and I am of course more than happy to answer any questions you may have -- either here, or via my email address, at steve@stevesdetectorrods.com.

      After an extended period of working to design a superior shaft system, and extensive field testing, I believe that my goal for this complete shaft system has been achieved -- with these shafts providing a high-quality, wobble-free, ergonomically balanced, aesthetically enhanced upgrade to your Minelab Equinox!

      Thanks!

      Steve
      https://www.stevesdetectorrods.com
      https://www.facebook.com/stevesdetectorrods



       

    • By kac
      Finally got my patent for the digger, just made a new batch. PM me if you have any questions.
      https://www.ebay.com/itm/233812638842
      Thanks,
      Ken
       
×
×
  • Create New...