Jump to content
steveg

Dealer Sale Steve's Two-piece Carbon-fiber Lower Shafts For Garrett AT And Ace-series (both Black And Colored Options) Now Available!

Recommended Posts

 kac -- 

OH MY.  Yep, time to find out if you have a coil problem, or a problem with your recently repaired unit.  

Take your time, get things figured out!  If, once the dust settles, you would like a shaft, just drop me a note, and we'll get you taken care of.

Thanks!

Steve

  • Like 2

Share this post


Link to post
Share on other sites

Will do!

  • Like 1

Share this post


Link to post
Share on other sites

Curious if your lower shafts will fit the new Apex?

Share this post


Link to post
Share on other sites

kac --

I am trying to get confirmation on that, but I believe that Garrett is using the same shaft system for the Apex, that they do for the Ace- and AT-series units -- so my tentative answer is YES, I do believe my Garrett shafts will fit the Apex.  Once I confirm this, I plan to order tubes in a couple of different yellow colors, also, given the Apex color pattern (black and yellow), to add to my color options.  I will attach a picture of a couple of these yellow tubes I'm working with...

THANKS!

Steve

 

 

yellow-tubes-for-apex.jpg

  • Like 1

Share this post


Link to post
Share on other sites

The gold braid would look good on the Apex, hope they fit.

Share this post


Link to post
Share on other sites

kac --

I agree, I thought so, too.  The solid yellow color there, is actually a tube I am experimenting with for a shaft for an MX Sport -- that's the exact color of yellow used on the Sport.  I'd need to get the exact color of yellow used with the Apex, if I wanted to precisely match the Apex color scheme.  However, like you said, that gold braided one seems like it would look good, with the Apex.  Obviously, some waiting (for release of the unit) and some experimenting are in order.  However, as I said, I am pretty confident that the shaft system on the Apex is the same as on the Ace/AT, and so I should be able to offer shafts for the Apex, as soon as it is released.

Thank you for your interest!

Steve

 

 

  • Like 2

Share this post


Link to post
Share on other sites

You could give Garrett a hollar they may tell ya.

Share this post


Link to post
Share on other sites

kac --

I have been trying to get in contact with the production supervisor at Garrett.  I've called, but haven't reached him yet.  I'll keep trying...

Steve

 

 

Share this post


Link to post
Share on other sites

I would like to add to this post that Steve’s detector rods are, hands down, the best products as well as his awesome customer service. I love my Blue lower rod from Steve.

Share this post


Link to post
Share on other sites

BeachHunter -- THANK YOU for the endorsement!  It's very much appreciated, sir!

Steve

Share this post


Link to post
Share on other sites

  • Similar Content

    • By Jim McCulloch
      New Goldmaster 24K with BOTH the 10x6 DD searchcoil and the 6.5" Concentric searchcoil, coil covers for both coils, autographed copy of my book "Advanced Nuggetshooting with the Goldmaster 24K," my 24K optimal tuning "cheat sheet," and a nugget test card (a 1/4 to 1/3 grain "test" nugget laminated onto my business card featuring my contact information), all of this, shipped to lower 48, for $824.95. In stock, ready for immediate shipment. Call me at (760) 401-7514. HH Jim
    • By Rob Allison
      Hello All, Check out these amazing Memorial Day Specials that will run through July 31st 2020. Don't miss out, get FREE items with many Minelab detector purchases. See the listing below that shows all the exciting deals available through Rob's Detector Sales.   Purchase the following -   Minelab GPZ 7000 Metal Detector - $7999.00 - Get FREE 19" GPZ Searchcoil Minelab Equinox 600 Metal Detector - Get FREE Minelab Pro-Find 20 Pinpointer Minelab CTX 3030 Metal Detector - Get FREE Minelab Soft Padded Carry Bag and Minelab 6" CTX Searchcoil Minelab Go-Find 22 Metal Detector $149.00- Get FREE Go Find Carry Bag Minelab Go-Find 66 Metal Detector $249.00 - Get FREE Pro Find 20 Pinpointer Minelab Equinox 15x12 Searchcoil $239.00 - Get FREE Equinox Lower Shaft   Contact us today if you have any questions or would like to purchase. We would love to earn your business!   Rob's Detector Sales Surprise, AZ www.robsdetectors.com 623.362.1459 office 602.909.9009 cell or text questions
    • By Rob Allison
      Hello All,
          There is still time left to get in on this great Coiltek Promo that will end 5/31/20.  Right now if you purchase any of the 3 Coiltek Gold Extreme Searchcoils for your Minelab SDC 2300 metal detector, you can get 20% OFF and FREE Shipping/Handling if you purchase through us.  
      The new Gold Extreme Series provides more choices with the Minelab SDC 2300.  The coils have been designed to complement the detector's performance and enhance the experience of the prospector.  These Litz-wound coils provide more options over the stock 8" Round coil, which would include more coverage, better sensitivity and more depth with the larger coils.  Taller operators will also love the extended shaft that is part of the mounting kit.  
      Order today from Rob's Detector Sales - 20% has been applied to all the links below 
      Coiltek 10x5" Elliptical Gold Extreme Searchcoil - https://www.robsdetectors.com/coiltek-10-x-5-gold-extreme-searchcoil-for-minelab-sdc-2300/
      Coiltek 11" Round Gold Extreme Searchcoil - https://www.robsdetectors.com/coiltek-11-round-gold-extreme-searchcoil-for-the-minelab-sdc-2300/
      Coiltek 14x9" Elliptical Gold Extreme Searchcoil - https://www.robsdetectors.com/coiltek-14x9-gold-extreme-searchcoil-for-the-minelab-sdc-2300/
      Coiltek Mounting Kit (needed for anyone of the coils) - https://www.robsdetectors.com/coiltek-gold-extreme-accessories-pack/
      All these coils will help you get more out of your Minelab SDC 2300 metal detector!
      Rob's Detector Sales
      Surprise, AZ
      623.362.1459

    • By steveg
      Greetings!

      This complete, high-quality, lightweight shaft system for the Equinox consists of:

      1). A 35 1/2" long carbon-fiber upper shaft, with four cuff adjustment holes, and one hole for the control-box handle (located in the same positions as on the Minelab upper shaft section). This upper shaft replaces -- as a one-piece section -- both the middle and upper sections of the stock Minelab shaft;

      2). A 26" long carbon-fiber lower rod, including spring-button clip (the same lower rods I've been selling for several months).

      The following pricing applies to several basic shaft options...

      1. Upper shaft section ONLY (no lower rod), regular end cap … $79 plus shipping

      2. Upper shaft section ONLY (no lower rod), threaded butt-end and threaded end cap (to allow compatibility with the threaded counterweight system) ... $89 plus shipping

      3. COMPLETE shaft system (upper shaft section PLUS 26" lower rod), regular end cap ... $129 plus shipping

      4. COMPLETE shaft system (upper shaft section PLUS 26" lower rod), threaded butt-end and threaded end cap (to allow compatibiility with the threaded counterweight system) ... $139 plus shipping.


      All of the above shafts can be customized in various ways, per customer preference (rod length, hole locations, etc.) Optional spring button holes (to facilitate use of the lower rod spring button) can also be included in any of the upper shaft options above, for an additional $10 (the button holes are not REQUIRED, on my shaft, due to the strong/secure clamping cam lock system that is used with these shafts, but are available as an optional inclusion).

      As alluded to above, an optional counterweighting system is also available for these shafts, to alleviate the "nose-heaviness" many Equinox users have noticed. The counterweight -- short-lengths of carbon-fiber tube, filled with small bags of lead pellets, and which screw into a threaded insert in the butt-end of the shaft -- can either be packaged with a shaft system, or purchased separately later, as an add-on accessory. The tubes are custom-built to each user's desired weight/length, and additionally, the weight of the tube can be adjusted at any time, via access to the internal weighting through a threaded end cap.

      Empty counterweight tubes (with the customer supplying the weighting) ... $25 plus shipping

      Weighted counterweight tubes (built to customer specification) ... $35 plus shipping

      Finally, I have created several documents to provide more detailed information regarding the shaft system itself, including counterweighting and how to choose the right weight for your situation, the "button holes vs. no button holes" decision, etc. I can provide these documents to anyone who requests them, and I am of course more than happy to answer any questions you may have -- either here, or via my email address, at steve@stevesdetectorrods.com.

      After an extended period of working to design a superior shaft system, and extensive field testing, I believe that my goal for this complete shaft system has been achieved -- with these shafts providing a high-quality, wobble-free, ergonomically balanced, aesthetically enhanced upgrade to your Minelab Equinox!

      Thanks!

      Steve
      https://www.stevesdetectorrods.com
      https://www.facebook.com/stevesdetectorrods



       

    • By Kickindirt
      a FREE KR24 OR KR18C SEARCH COIL + WATERPROOF BATTERY POD  + PREMIUM DIGGER+ CAP with MULTI KRUZER OR ANFIBIO MULTI. 
      THIS IS $243 WORTH OF FREE GOODS!
      Joel at
      PH:775 388 8277 call or text
      Email Liebelt1@gmail.com
      http://metaldetectingbuyselltradeusa.com
      Buy Sell Trade USA Only Facebook Group 5800+ members come Join its free
      https://www.facebook.com/groups/749287428435998/?ref=group_header

    • By Jim McCulloch
      I have just published a highly informative book entitled "Advanced Nuggetshooting with the Goldmaster 24k." It is a Goldmaster 24k-oriented MAJOR revision of my popular "Advanced Nuggetshooting - How to Prospect for Gold with a Metal Detector" book.  It is 98% advanced nuggetshooting techniques. I am offering it, AUTOGRAPHED, PLUS my pamphlet "GMT 24k Controls and Recommended Settings" cheat-sheet, for $10.00, postpaid, to Continental US addresses. Payment via PayPal, to my account ophirau@gmail.com. Payment by check also accepted; contact me for more info. OR, for those of you who don't already have the original "Advanced Nuggetshooting - How to Prospect for Gold with a Metal Detector," I am offering the extensively-revised 2019 Edition, postpaid, autographed, for $9.95. HH Jim PLEASE NOTE: IF YOU ORDER, PLEASE ALSO SEND ME AN EMAIL PROVIDING YOUR ACTUAL SHIPPING ADDRESS. PAYPAL DOES NOT PROVIDE SUCH. THANKS.
×
×
  • Create New...