Jump to content
Sign in to follow this  
Whitbey

Anybody Used The TDI Beach Hunter In The Gold Fields ?

Recommended Posts

Whites quoted on their website that the TDI beach hunter can also be used as a nuggett hunting  detector in the gold fields. Was wondering if their was somebody who tried it and what their experience is and what the sensitivity on small gold is?

Share this post


Link to post
Share on other sites

The electronics in the TDI SL, TDI SL Hi Q, and TDI Beach Hunter, are the same circuit board.
The TDI Beach Hunter is locked into the ALL CONDUCTOR mode. It cannot separate low and high conductors liker the TDI SL.

Hope this help.

Good Luck😎

Sincerely

Hamid 

 

Share this post


Link to post
Share on other sites

Separating high and low conductors when looking for a wide range of nuggets (sizes and purity) is risky as the crossover point ties in with where the GB is set. The TDIBH has the power but the GB range/resolution will be problematic in highly mineralised ground.....which down here is very widespread. In milder ground then it might be okay but if you are serious about nugget hunting then there are much better options out there. 

Share this post


Link to post
Share on other sites

Whitbey in theory the Tdi Beach Hunter should to some extent operate like a Tdi Sl mounted with the 12 inch Duel Field coil with conductivity in ALL. Having said that, it means in theory it should work reasonably well on the goldfields. I have used the 12 inch Duel Field coil on the Victorian goldfields on a Tdi Sl, took a bit of time to get the ground balance 'just' right, there was a degree of 'ground noise' that had to be endured.  Due mainly to the size and character of the coil compared to a smaller mono for example. With my experience on the SL with this coil I conclude by stating it will be more work to ground balance and  operate but it is still fully functional despite being a bit noisy.  Since the coil wasn't hardwired I did swap out for  a smaller mono which was easier to ground balance, ran smoother and was more stable. As Tony state the machine may well be pushing its limits if the ground becomes very hot and you would be better served by other machines. 

 Until you actually try it the question remains. You are not the only one asking this question, particularly in the USA were the soil conditions are perhaps less severe than those encountered by me in Victoria Australia or by Tony in Western Australia. The ability to take your beach machine into the goldfields is a bonus, perhaps into the rivers and steams in those areas.. certainly an area worthy of exploration.  All the best.

  • Thanks 1

Share this post


Link to post
Share on other sites

What I will do is take my TDIBH to an area of high mineralisation.....it’s not too far from home, maybe a 20 minute drive. Just waiting for the weather to cool off first.

I will put it through it’s paces and we’ll see what happens....stay tuned !

  • Like 1

Share this post


Link to post
Share on other sites

I know that spot up in the hills and far away  we have been their toghether. Regards.

Share this post


Link to post
Share on other sites

Yep.....that was some years ago !

Keep well 

Tony 

Share this post


Link to post
Share on other sites

You guys are such great help and Tony I will be waiting for your test results . 

Thanks everybody  for your input!

Share this post


Link to post
Share on other sites

Okay....results are in.....and it was an ugly experience for sure.

No matter what setting I tried, even with low gain and increased pulse delay, the old girl screamed her head off. The ground was quite mineralised so in benign soil then things might be okay but in traditionally mineralised goldfields then it is a futile exercise. The GB didn’t stand a chance and I think I scared off most of the wildlife In the area......time for a cold beer to steady my nerves.

Now in parts of the USA, a lot of gold bearing ground is in much, much milder soils so that might work out. Do your homework before venturing to new ground......if it’s anything but benign ground.......don’t take the TDIBH 👎

Share this post


Link to post
Share on other sites
1 hour ago, Tony said:

Okay....results are in.....and it was an ugly experience for sure.

No matter what setting I tried, even with low gain and increased pulse delay, the old girl screamed her head off. The ground was quite mineralised so in benign soil then things might be okay but in traditionally mineralised goldfields then it is a futile exercise. The GB didn’t stand a chance and I think I scared off most of the wildlife In the area......time for a cold beer to steady my nerves.

Now in parts of the USA, a lot of gold bearing ground is in much, much milder soils so that might work out. Do your homework before venturing to new ground......if it’s anything but benign ground.......don’t take the TDIBH 👎

Thanks very much Tony for testing the unit, you saved me money and I will not by the TDIBH. ( Buyer Beware )

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Jacsco67
      Read earlier threads, mostly about the coil.
      Does anyone have experience with this pulse detector and do they find it to be an excellent detector for prospecting the desert?
      Would love to hear opinions from users. Not a lot of reviews out there.
    • By Smithsgold
      River Detecting for Gold Nuggets - See who gets the Biggest Nugget. Gold Prospector's Jeff ( Smithsgold ) and Gary ( Two Toes ) Head to the Hills in search of  rare Gold Nuggets. Watch and see who gets the most Gold and the Biggest Nugget. SG 010
       
       
    • By Steve Herschbach
      Well, thanks to forum member YubaJ I just ended up with a very slightly used White's Sierra Pulse Pro, or as it is more commonly referred to, the White's SPP. Bonus is it came with three coils, the standard 12" round mono, a 6" round mono that was part of an introductory special when they first came out, and a 5" x 9" Miner John folded mono coil.

      The Sierra Pulse Pro is nothing more than a White's TDI SL with the Conductivity switch and Pulse Delay knob both removed. The unit is locked into the hottest 10uS pulse delay. It is a limited availability machine only available from west coast dealers and in Australia. The whole story on how it came about is kind of interesting and detailed in my original thread on the machine from May 2014 at http://www.detectorprospector.com/forum/topic/213-whites-sierra-pulse-pro-whites-spp/

      Now you may ask, why did I get this detector? There is a story there also. My first detector was a White's Coinmaster IV that I purchased in 1972. My first detector dealership was for White's in 1976, and I have had good success using many of their detectors. I currently have a White's V3i with Bigfoot coil that is my jewelry machine for large parks and sports fields. Bottom line is White's and I go way back.
      Whether I intend to use them myself or not I like spreading the word about on new models others might be interested in, so I perked up when the SPP was announced. I was more than anything just excited to see a ground balancing pulse induction machine introduced for under a grand, plus I always liked the ultra light weight of the previous TDI SL model. So I really was kind of pumped up to get one and posted on a few forums about it.
      Now, I used to hang out a lot on the White's Electronics forum at http://forums.whiteselectronics.com/ to just offer some free help and support as one of the only people there that seemed to know much about the White's GMT and TDI models. I made a post there identical to the one on this forum at the link above, and I get this message from the moderator:
      "Had to remove the Pic and "Sierra" name from the title of your post. The SPP is a Jimmy Sierra product, and as such isn't allowed to be "advertised" or "plugged" on the open forum."
      I posted again, something along the lines of "WTF it is made by White's and is sold by White's dealers but because it says "Sierra" in the actual name of the product I am being censored?". I got another message saying my "rant" had been deleted and the issue forwarded to the admin. That was it for me - I banned myself and have not participated there since. Jimmy Sierra later contacted me to apologize and he did set things straight with the people at the forum but water under the bridge by then. Just another example of the strange and convoluted politics at White's Electronics.
      I had been all fired up to get the SPP but just put the whole idea aside at that point. Yet down inside I still wanted one. So when by pure chance I saw this SPP for sale at a good price I pounced, purely as an impulse buy. I have no real use for the machine and will probably sell it but I want to play around with it a bit.
      The main thing about the White's TDI SL and the SPP is they are crazy light weight. The machine weighs about 3.5 lbs with the 12" coil and right at a perfectly balanced 3 lbs with the smaller coils. This is what the Garrett ATX or Minelab SDC 2300 could have been and should be packaged like. After swinging a GPZ 7000 all summer the SPP feels like a feather!
      Now, the TDI SL and SPP models are not high power pulse units and like the Garrett Infinium they really do not do any better in low mineral ground than a good VLF detector. However, as ground mineralization and hot rocks get worse there is a crossover point where the problems these conditions cause on a VLF (loss of depth, false signals) can be overcome by using a ground balancing pulse induction (GBPI) detector. Something many people do not understand is that by adding a ground balancing circuit to a PI some depth is lost in an absolute sense, and this is very easily illustrated with the TDI/SPP models in air tests by just turning the ground balance off. The machine gains quite a bit of extra punch, and a nice thing about the White's GBPI models is they have this ability to be run in pure PI mode in low mineral ground. In particular this makes the original TDI and TDI Pro models some of the best beach PI detectors you can get your hands on.
      In the case of the TDI SL and SPP however running the machines with ground balance off is almost the same as running a good VLF in all metal mode. The only difference is you do get the ability inherent in all PI detectors to ignore some ground conditions due to the pulse delay and how it works. See Understanding the PI Metal Detector by Reg Sniff for details.
      More about the SPP versus the TDI SL. The SL comes with what White's calls a Dual Field coil, which is basically a small mono running inside a large mono. The coils look like doughnuts, the outer rim being the large coil, and the inner circle being a smaller mono coil, both running at the same time. The theory is the depth of a large coil with the small gold sensitivity of a small coil, all at the same time. The problem was these coils were a bit too hot for Australia, and so the SPP coils are just regular mono coils. Easy to confuse also because a 12" Dual Field looks identical to the regular 12" mono. My unit has both the 12" mono and a 6" round mono that was part of an introductory special (now over). The SPP was a killer deal at introduction with two coils for $999.95. It is now being advertised new with a single 12" coil for $999.95 but is being offered by at least one dealer for $899.95 with the single coil.

      I really like the little 5" x 9" folded mono coil and scuff cover that came with my unit. What is a folded mono you ask? Something Reg Sniff came up with, details at Link deleted since Findmall Forum update broke all old links Basically his answer to the White's Dual Field, which was patented. Miner John sells these for $199 at http://razorbackcoils.webs.com/apps/webstore/products/show/6277891 and it is probably one of the best coils you can get for a TDI to hunt gold.
      Finally, the SPP is interesting because it really is a TDI SL under the hood. The plug in connections for the Conductivity switch and Pulse Delay control knob are still on the circuit board, and the SPP can be upgraded back into a TDI SL for just a few dollars in parts. Here is a thread on adding the Conductivity switch back in at https://www.prospectingaustralia.com.au/forum/viewtopic.php?id=13934 You can see the little white plastic sockets on the control board picture below marked conductivity and pulse delay.
      Anyway, just got this and no time yet to do more than take pictures and post but when I get time more will be forthcoming.


    • By karelian
      The passing of a friend unfortunately has led to me taking ownership of a modified Tdi Pro. My machine is mounted on an Anderson shaft and is factory spec. My old mate had his machine modified to smooth out the threshold and to add some sensitivity. The specifics related to the modifications are not known by me, other than that they were conducted by 'Luke'..Oz Digger.. This happened some time ago. So the modified machine is probably not a keeper, I don't want two Tdi Pro machines.. The opportunity to do a comparison cannot and should not be ignored. 
      My intention is to focus on small gold performance, the threshold smoothness, the ability to use gain, basic performance and handling characteristics  under different circumstances. The machines will use the same fully charged battery pack, same coil, same targets, same test location and conditions on the same day etc. Trying to minimise external variations. I'll start with the usual useless air test. Later I'll follow up with in ground testing on the actual goldfields in mineralized soil. Test coils will be with a small coil and a large coil. Targets will be gold only. The 1 grain ingot, the half gram gold coin, a half sovereign gold coin. Some real small sub gram nuggets to see how small we can go.. There is a process involved so I'll take my time and do it right.  Any specific questions or suggestions, speak now or forever hold you peace.. I'm only doing this once. Once it sold it will be too late to revisit.. 
      All the best.

    • By karelian
      Just arrived in the mail, Nuggeteer 18 x 6 mono, mounts nicely on the Tdi pro using a Minelab lower rod. It is weighty at 1 kg but easily balances on the Tdi Pro, just don't have any metal in your shoes..
      When the weather clears I'll go down to the beach and give it a good run. Useless air tests, test garden results and beach run results in the very near future.. karelian







    • By Joe klecz
      Was here with the with the 7.5 and Hi-Q coils ,  it leaves tomorrow,, absolutely no comparison to the big box TDI ,, and the HI-Q isn’t any better at air tests than the 7.5  coil,, Whites says it’s for relics as well as gold (HI-Q)  maybe gold,, not relics having pursued relics for the past 35 years this combo isn’t it ,, I’ll stick with the big box and the standard spider coil,,, or use my other pulse the M/L GPX5000 ,, and as someone else had written ,, we shouldn’t have to buy or make higher voltage batteries to gain depth  ,, don’t get me wrong I love my Whites detectors owning1,  Big Box TDI ,, 2 , 6000 xl 1, Blue&Gray, 1,MX Sport ,, and 1 Eagle in Brand New  mint condition too pretty to use ,, this package is advertised as a gold and relic  detector / that HI - Q isn’t for relics of much depth  before it taps out  
×
×
  • Create New...