Popular Post Chris Ben Posted February 21, 2020 Popular Post Share Posted February 21, 2020 Hi all, been pretty busy lately, and what started out as a really slow year ended up being pretty good prospecting wise. The first half of the year was very slow, only able to scratch a few nuggets out of some old patches. Not much luck looking for new areas. A few buddies and I decided to meet up in the middle of the summer in Gold Basin. Dave, Steve, and a couple of other Chris' . They were out there since Friday evening, but because of work I couldn't get out till Saturday afternoon. Dave was meeting us on Sunday. I made the drive out from Vegas, and when I got there I tried reach the guys, but no luck. Cell service can be spotty out there, and the must have been out detecting. I figured I might as well get started on my own till I was able to reach them. I ended up in an area where I had found a nice gold quartz specimen years ago, and figured I might grid the area to see if I could come up with a few scraps. It was found 3/4 the way up a tiny drainage where nothing else was found (by me anyway) I detectected the drainage top to bottom with no luck, so I decided to hit the hillside. About 7 or 8 feet from where I found that specie I jammed the coil under a creosote bush and got a strong signal over a large area. It wasn't a distinct signal like a nugget, so I kind of thought I was some mineralization but decided to dig anyway. There was only about 5 or 6 inches of overburden, so I scraped that off, and now the signal was sounding much more like a target, but still over a 2 sq ft area. I carry a rock hammer in my pack so I used that to tear up the bedrock. I got down about a foot total and now the signal was screaming. One more attempt with the hammer, and now I have signals in the tailings. I pick up a piece of quartz and put it over the coil...bingo!! I found my first pocket. I actually found the source. I kept working on my hole, still pulling gold out, and still getting strong signals in the bedrock. I was finally able to reach the other guys and dropped them a pin so they could meet up with me. Everyone got some specimens out of my tailings. Over the next several weeks I brought home several buckets of ore. I kept at it till there was no more signal in the ground with my GPZ. The next step was to crush and pan...geeze that is tedious work when you dont have a proper rock crusher. It took several more weeks to process the ore. thanks the pocket ended up being around 4oz!!! And a big to 1515Art and his contest I got to use my kiln to make my first gold bar. Took me a while to figure out how to use the electric kiln, it does take a few hours to reach proper temps, but works great!! added to the nuggets I found, it was a 5z year! I still have some ore to crush and a nice speci I may just keep. But definitely learned a lot. I'm going to be looking for more pockets. 2020 has been a pretty good year so far as well. Cheers, Chris 20 3 Link to comment Share on other sites More sharing options...
flakmagnet Posted February 21, 2020 Share Posted February 21, 2020 Great post. Thanks for taking the time to put it up. 1 Link to comment Share on other sites More sharing options...
IdahoPeg Posted February 21, 2020 Share Posted February 21, 2020 Wow, you did great! Congrats! 1 Link to comment Share on other sites More sharing options...
mn90403 Posted February 21, 2020 Share Posted February 21, 2020 When you don't hear or see someone for a while you know they're working on something! haha I wonder what 'they' found that day? Well done. Mitchel 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted February 21, 2020 Share Posted February 21, 2020 That’s awesome, I’d love to find a little in place deposit like that. Thanks for posting! 1 Link to comment Share on other sites More sharing options...
Chris Ben Posted February 21, 2020 Author Share Posted February 21, 2020 Thanks guys, I appreciate it. There was a lot of luck involved. Here are a couple of other pictures. 4 1 Link to comment Share on other sites More sharing options...
jasong Posted February 21, 2020 Share Posted February 21, 2020 Nice work, you are definitely a gold magnet Chris, I got a feeling you'll be onto another pocket next year too! Heck, there is still time left this winter. 1 1 Link to comment Share on other sites More sharing options...
Glenn in CO Posted February 21, 2020 Share Posted February 21, 2020 Congrats! on the gold pocket, you don't happen upon those to often. Nice total haul for the year. I like your homemade rock crusher, looks like you used a little bit of everything to build it (square tubing, threaded rod, pipe and part of a horseshoe?)👍 1 Link to comment Share on other sites More sharing options...
Steve Herschbach Posted February 21, 2020 Share Posted February 21, 2020 Do you think that was actual in place pocket vein material, or possibly just a large quartz specimen that decomposed/shattered/broke up in place? It's hard to tell from the photo if you are into decomposed bedrock or talus. Link to comment Share on other sites More sharing options...
Chris Ben Posted February 21, 2020 Author Share Posted February 21, 2020 55 minutes ago, Steve Herschbach said: Do you think that was actual in place pocket vein material, or possibly just a large quartz specimen that decomposed/shattered/broke up in place? It's hard to tell from the photo if you are into decomposed bedrock or talus. Definitely vein material, a lot of work with pick axes and rock hammers. Overburden kept falling into the hole so it looks dirty. And the gold would pinch out, but wed dig deeper and find another signal. The GPZ definitely helped 3 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now