Jump to content
Rom14

Finally - A New Impulse Video From Le Jag

Recommended Posts

a new video by Le Jag

 

 

 

  • Like 8
  • Haha 1

Share this post


Link to post
Share on other sites

Love the new video!  GaryC/Oregon Coast

Share this post


Link to post
Share on other sites

At the 2:00 mark..........I couldn’t help but think that it could “flat line” 😳

Share this post


Link to post
Share on other sites

I love seeing gold come out of the hole.

HH
Mike

Share this post


Link to post
Share on other sites

Am I missing something here?  Most finds don't appear very deep, yet the Minelabs couldn't find any gold but the AQ did?  

 

  • Like 1

Share this post


Link to post
Share on other sites
7 hours ago, JohnnyRox said:

Am I missing something here?  Most finds don't appear very deep, yet the Minelabs couldn't find any gold but the AQ did?  

 

yes, i stayed 4 days on the spot
and after 10/15 prospectors, you have the result
big rings went out on the night tides
the large signet ring 13.5 gr was especially deep
on the video, the square ring and the last (dome with the stones)
went out after another target / over / coin and bullet

  on the 4 days there was a lot of wind
the sound / clean / on gold that AQ gives becomes an advantage

for me it's the best test
reality / and you have it in front of you
11 gold rings
walking behind several minelabs
of course, experience makes the difference
but i'm not superman, lol
I just have a good detector..........

 

 

zzz.JPG

  • Like 5

Share this post


Link to post
Share on other sites

Regarding the depth of targets in the video,I took some stills from the video. They show

1. An overview of the beach - if you click it to blow it up you can see another guy detecting

2.The beach surface when LE.JAG made the video - notice the marks on the pilings - I think the upper part is what was previously exposed and the lower part shows how much sand was shifted, 

3.The original installation by the Nazis

4. One of the Teller mines - the bronze disc on the top is the fuse mechanism that LE.JAG found so many of. With the eagle and swastika, I suspect collectors who are into that sort of thing would eagerly buy these!

E2CFB8FA-65A8-4015-A884-ECC1090C92AD.jpeg

A7343B35-8BDE-49A7-84E0-0BB1E6D22122.jpeg

BBB722E4-E1F0-408B-BCFE-7AFB0AFF49B7.jpeg

AC7C9739-6CAC-4991-ACBD-0582AB587071.jpeg

Share this post


Link to post
Share on other sites

on the first image there are two prospectors
one at the bottom and another among the posts

in normal times the remains of the posts are not visible
they are under the sand
on this beach / over 5 years ago

strangely, all the heads of Teller mine
let's not get the swastika,
only one of those found, year of production 1938
I also had to dig a very large amount of piece of brass
detonator remnant

xyz.JPG

19.JPG

  • Like 2

Share this post


Link to post
Share on other sites

 

Wind and noise is a major factor when hunting. Enjoyed the video, Thanks for sharing.

I like the longer then normal coil cable LE JAG. Something that would be good to isolate the control box from the saltwater...And the reason I mention this is ......"IN" rough saltwater the effect of the water on the control box can cause noise. Something I did with my excalibur was to remove the control Pod from the water and run it under my drysuit. The results.... the excalibur went from a machine that was hard to use, false-ing in rough water to a machine that was almost silent and un-affected by the current and waves. Still some noise from the coil but so much better it can turn a bad hunt into a good hunt.

  • Like 1

Share this post


Link to post
Share on other sites

Nice video of the AQ, but it's a teaser again holding a carrot in front of us.

I want to see the AQ in production and want to swing one, maybe the Defence Production Act just put into power and used for us detectorist make Fisher move faster. 😄

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By PPP
      HI guys!
      It feels very good that this nice forum is at high speed with all discussions about the AQ with all different subjects about the AQ.We are now in the middle of january and still nothing from the Fisher.No reports from any tester, no videos, no manual, nada...it feels kind of depressing without knowing any informations at all.I know that LE.JAG and Alexander can't say anything about these informations even though the know for sure.Is there any thought or any guesses about these questions? 
    • By BigSkyGuy
      Many of you have expressed a desire to know how well the Impulse AQ will function for land use. One option is to wait until the unit is released. I know, no fun! The other option is to analyze the information we do have on the unit and on PIs in general, combined with information from the scientific literature and various forum posts. I have done such an analysis which is a bit long, but I will summarize the findings followed by how I arrived at the conclusions. The places where I believe the unit will be effective include the following:
      Black sand beaches (mainly coarse unweathered magnetite)
      Soils containing mildly weathered granite and other felsic igneous rocks (I know this appears to conflict with Alexandre’s post, but I will elaborate below)
      Unweathered or mildly weathered basic igneous rocks (basalt, gabbro, etc.)
      Places where I think the AQ will struggle include:
      Weathered basalt and soils derived from basalt
      Some fine-grained volcanic rocks such as rhyolite.
      The basis of my groupings above is the published magnetic susceptibilities (MS) for various minerals and rock types and on the concept of frequency dependent MS which is a very important consideration for PI detectors.
      MS is a measure of the magnetization of a material in response to an applied magnetic field. Frequency dependence is when the measured MS varies when different frequencies are used for the induced field. Minerals with high MS are responsible for the “mineralization” when speaking of metal detector performance. Three minerals are responsible for most “mineralization”; magnetite (Fe3O4), titanomagnetite, and maghemite (ꝩ-Fe2O3). The MS for these minerals are orders of magnitude higher than for other iron minerals such as hematite (α-Fe2O3), goethite, biotite, pyroxenes, etc. The relative proportions of these minerals within different rock types determines the MS of the rock. Ranges for different rock types are shown in the table below.
      Rock Type
      Magnetic Susceptibility Range (10-6 SI)1
      Andesite
      170,000
      Basalt
      250-180,000
      Diabase
      1,000-160,000
      Diorite
      630-130,000
      Gabbro
      1,000-90,000
      Granite
      0-50,000
      Peridotite
      96,000-200,000
      Porphyry
      250-210,000
      Pyroxenite
      130,000
      Rhyolite
      250-38,000
      Igneous rocks
      2,700-270,000
      Average felsic igneous rocks
      38-82,000
      Average basic igneous rocks
      550-120,000
      Quartzite
      4,400
      Gneiss
      0-25,000
      Limestone
      2-25,000
      Sandstone
      0-20,900
      Shale
      63-18,600
      1.       Compilation from Hunt et al. (1995)
       
      Minerals with high MS are responsible for the poor performance of VLF metal detectors. Hematite within soils is typically red, but given the relatively low MS, is not particularly problematic to metal detectors. So, red soil is not always bad!
      The MS of soil is a function of the parent rock from which it was formed (see table) and the degree of weathering of the iron minerals present. Soils formed from basic igneous or volcanic rocks such as basalt generally have higher MS than soils formed from felsic rocks (rhyolite, granite, etc.), but it depends on the specific rock. For example, some granites have low MS because they are dominated by ilmenite (S-type granite) as opposed to magnetite (I-type granite). Ilmenite has low MS. Geologists use MS to map different types of granite. Da Costa et al. (1999) found that the basic volcanic rocks from southern brazil produced soils containing maghemite (high MS) and hematite while the intermediate to felsic volcanic rocks produced soils containing goethite (low MS). However, there are examples of basic rocks having low MS and felsic rocks with high MS, it all depends on the mineralogy, the grain size, the degree of weathering, subsequent geochemical reactions during and after soil formation, and other factors.
      Typically, the smaller the grain size, the higher the MS. Therefore, a volcanic rhyolite which has a much smaller grain size than its intrusive equivalent granite, will have a higher MS even for an identical magnetite content. Smaller magnetite particles also weather faster than coarser grains. Magnetite can weather to maghemite on exposed outcrops. Maghemite is an earthy mineral that forms very small grains. The small grains produce a superparamagnetic domain which results in frequency-dependent MS which causes problems for even PI metal detectors, especially PIs which do not have the ability to ground balance (such as the Sand Shark and Impulse AQ). Magnetite can also form very small grains, and if small enough can also be superparamagnetic. However, magnetite tends to be coarse-grained while maghemite tends to be very fine-grained.
      Maghemite tends to form from magnetite and other minerals in tropical climates or where tropical climates once existed. The “bad ground” in Australia is due to the presence of maghemite, which is a brown to brick red mineral. Maghemite is less common in the US but is present. Magnetic anomalies found at the National Laboratory at Oak Ridge TN were found to be natural deposits of iron-bearing colluvium (sediment which has accumulated at the base of a mountain range) which has oxidized to maghemite (Rivers et al., 2004). Maghemite and hematite can be created from goethite (α-FeOOH) in response to the heat generated by forest fires and slash and burn agriculture (Koch et al., 2006). Therefore, poor detecting conditions can be created in such areas.
      The bad ground at Culpepper VA is probably due to maghemite, but I have seen no information to confirm this. Geologic maps of Culpepper Co. do show the presence of basic bedrock, such as basalt and dolerite.
      The granite that Alexandre mentioned as giving the Impulse AQ problems may be an I-type granite (magnetite rich) in which the magnetite has partially weathered to maghemite.
      The reasons for why I think the Impule AQ will or will not work in various soils/rock types is summarized below.
      Soil/Rock Type
      AQ Works?
      Reason
      Black sand layers on beach
      yes
      Black sand is derived from physical weathering of igneous and metamorphic rocks in upland areas and consists mainly of relatively unweathered magnetite.
      Soils derived from felsic igneous rocks
      probably
      Felsic igneous rocks with high MS, tend to be coarse grained and even when dominated by magnetite (I-type) do not typically produce maghemite unless highly weathered.
      Soils derived from basic igneous rocks
      Probably not
      Soils derived from basic igneous rocks tend to be dominated by maghemite.
      Basic igneous hot rocks
      maybe
      Basic igneous rocks such as gabbro can be a problem if weathered or partially weathered to maghemite.
      Felsic igneous hot rocks
      probably
      Unless highly weathered, felsic rocks are dominated by magnetite which the AQ should be able to handle
      Volcanic hot rocks or black sand beaches (i.e. Hawaii)
      maybe
      If fresh, the main source of MS is magnetite. If weathered or partially weathered to maghemite, the AQ may have problems. If very fine grained even unwethered volcanic rocks may present a problem.
       
      References
      Da Costa, A.C.S, Bigham, JM, Rhoton, FE, and SJ Traina. 1999. Quantification and Characterization of Maghemite in Soils Derived from Volcanic Rocks in Southern Brazil. Clays and Clay Minerals, v. 47, no. 4, p. 466-73.
      Hunt, CP, Moskowitz, BM, and SK Banerjee. 1995. Magnetic Properties of Rocks and Minerals. In Rock Physics & Phase Relations: A Handbook of Physical Constants, Volume 3.
      Koch, C.B, Borggaard, OK, and A. Gafur. 2005. Formation of iron oxides in soils developed under natural fires and slash-and-burn based agriculture in a monsoonal climate (Chittagong Hill Tracts, Bangladesh). Hyperfine Interact 166, 579–584.
      Rivers, JM, Nyquist, JE, Terry, D.O., and W. E. Doll. 2004. Investigation into the Origin of Magnetic Soils on the Oak Ridge Reservation, Tennessee. Soil Science Society of America Journal, Vol. 68 No. 5 p. 1772-1779.
    • By dewcon4414
      I think it will also be interesting to see what an aftermarket company might do with the 7uS coils.   Will we see more if this machine catches on?   Better yet will we see 7uS become the standard?   OR... is that a non-issue toward depth and sensitivity?  
    • By JEKOS123
      Hello Guys,
      I'm new on this forum and like Alexandre Tartar, I live in north of France.
      I was a young prospector in the 90's and asked my father (electronic engineer with good knowledge in magnetic field theory) to build a PI to hunt the beaches. So we have made, in a few months, an home-made PI metal detector 25 years ago, based on the technology of the old White's Surfmaster PI (mono coil). I remember the use of FETs (Field Effects Transistors to make 200 volts pulses). It worked, but unfortunately, my father was afraid by a so powerful magnetic fields and has continued his research on VLF detectors, until today !
      After this short presentation, here's my question :
      Is the Impulse AQ a bipolar detector ?
      Le Jag has explained us on the french forum "detecteur.net"  this technology developped by Alexandre :
      Positive and Negative pulse are alternatively sent.
      The positive one light the gold ring but magnetize the soil.
      The negative one demagnetize the soil.
      What about it ?
    • By PPP
      I think the Garrett ATX challenges the AQ most and maybe TDIBH come close after ATX only in raw depth.I have myself an ATX and hunt my beach with it. Max sensitivity givs me around 15 inches for a normal coin size object.My Garrett sea hunter is absolutly no match and even my Equinox has no chance.The fair comparisson is ATX (PI , almost same coil size,waterproof ) I think the AQ has only one tone for both high and low conductive targets and one for iron.The ATX has one tone for high and one tone for low conductive targets but you have no tone for iron which makes one to digg all.
×
×
  • Create New...