Equinox 800 - Please Help Sensor Going Crazy!

[schoolofhardNox]

I usually test mine in single frequency of 40k or 20K in gold mode. I guess you could try any other mode (except beach) set at 20k or 40k. If it's a lot quieter, than it was EMI.  If not, then maybe it is your coil. A full reset should be tried also.

[2Valen]

Please check what update you have and if it is old, get the latest update.

Go to a park and stay clear of all power lines as they will give the most EMI. Leave your cell phone in the car and try your unit again. I had a very similar problem and found that it was the power lines and a new cell tower in my area. After the update it seemed to take care of the problem.

[Jakar54321]

Hello!Actually the first button on the equinox screen  on the button that would take care of that situation.But as you press the reject and accept  button keep pressing and point the equinox towards the sky until its done doing what its doing Because some of us dont lift it up and let it face the ground.Happy Hunting Stay safe!

[Jakar54321]

It was explained to me  if the equinox is chirping alot.I was told to turn down the sensitivity by the plus and minus buttons until no noise.I tried it around 17 would work as it did for me.