Jump to content

New 12x8" GPZ X-coil On It's Way And An 8" Round In The Making


Recommended Posts

Yes they do look good, and yes I have seen them, because I unpacked them to make sure thay had no damage after a 4 month odd long scenic voyage all around the world.

But the packaging kept them safe  and no physical damage, so I repacked them and now there ready for the final leg of the journey.

And yes, by the way the x-coil for Simon has a short "Chet" type coil cable and the one for JW has the long curly coil cable.

image000000.thumb.jpg.0713ad9b6520a0af6eb8fd7ff727d3a9.jpg

image000001.thumb.jpg.3219884a2f5c18b20f0e53d5c6a75e01.jpg

cheers dave

 

 

 

  • Like 3
  • Thanks 1
Link to post
Share on other sites
  • 2 weeks later...

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Its like Christmas 😛  Today is the day, I woke up and checked the tracking number, it hadn't changed!! made myself breakfast and then looked out the door in anticipation of a courier, no joy.... ate m

I have ordered a new size X-coil, it's a 12x8" X-Coil,  It's already in the post however it's delayed in shipping due to international shipping delays the world over.  Hopefully this coil arrives soon

I am pretty excited about it, as you know the smallest coils are the best coils in NZ.  When we use VLF's we use the smallest coil for it, when it was the GPX people used the smallest coils they could

Posted Images

Yay! My 12x8" and JW's 12x8" Coils arrived to my house today, I'll have to get JW's to him as quick as possible as I know he's really been looking forward to this coil.

IMG_20200803_114738.thumb.jpg.07dcc7278f716541ebf97a26c664cd5b.jpg

I will have to go try it out this afternoon, unfortunately it's too late in the day to go look for gold today or I'd be off now on a mission.

IMG_20200803_114427.thumb.jpg.7f752bccaa4c3b1b7f405eb749787246.jpg

Here is the family of small coils with the 12x8", 8" and then 10".  I need more lower shafts for quick changeovers.  I think the 12x8" is going to be good for getting in between the bedrock, the 8" was and they're the same width. 

IMG_20200803_142420.thumb.jpg.b696b04a07c0a54eca9e1bb36e590e0f.jpg

  • Like 6
Link to post
Share on other sites

I wanted to find a way to show the different coil sizes, it's easier to see by using the coil covers than the actual coils.  When I sat the coils on top of the coils the sizes look off, but the coil covers give an exact size comparison.

IMG_20200803_194233.jpg.55248d04d5f6826ab8daef859538820c.jpg

See how they almost look the same size

IMG_20200803_194257.jpg.508f6ebb2114ab4b39c21f6871ba1017.jpg

Then when using the 8" GPZ X-Coil skid plate you get the actual size comparison

IMG_20200803_194340.thumb.jpg.685a46f1699bd2fc203d2479726ee608.jpg

The 10", 12x8" and 8" together, the 12x8" looks like it'll be good to get into tight spots.

IMG_20200803_194353.thumb.jpg.7e488fe538a2bbe197f4210136f22db2.jpg

IMG_20200803_194431.thumb.jpg.c62c4bc186491fe09452e45ec1b213eb.jpg

Size comparisons when the GPZ 14x13" coil is in the mix.

IMG_20200803_194450.thumb.jpg.315e88d5331ae915c1c8e038c84b737f.jpg

This was done at night so excuse the poor lighting.

  • Like 5
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By zortan
      Hello all,
      After a long day of working on getting skunked and just before sundown I changed my detecting technique from a very Gerry way of detecting to a very Lunk way of detecting. ( rather fast vs. like a turtle). When I did this I started to find nuggets again, small guys like .1 and .2 grammers but hey, gold is gold right?
      my question is two fold, does a large deep target sound the same as a very small shallow one?  Does the fact that I started to find targets again have more to do with coil control or does the GPZ need time to charge up the ground or something like that?
    • By phrunt
      JW has had a bit of an ongoing battle with me, for some time now he's been advising me to use my PI's over my VLFs, then when I bought a GPZ he was advising I use GPZ over my VLF's to find more gold.  I know he's right as the proof's always been there, he's been finding more than me consistently since we met but I kept picking up the VLF's as they were my comfort zone.
      I've struggled more on the PI's especially and always favored the VLF's as down here at the bottom of the planet we tend to have a lot of smaller gold and far less bigger stuff and the VLF's tend to be the most sensitive to small gold, I ended up finding gold regularly with the VLF's, just nowhere near as much as he was finding with his GPZ.  On a trip I'd find maybe 1 or 2 bits and he'd find 8 or 10.
      We'd go to go out on a hunt and I'd show up at his place and I'd be standing there holding my Equinox and he'd go OHHH the NOX hey! 🙂  I'd find any excuse to use the VLF as I felt comfortable on them, especially the Nox with all my coin hunts, I knew it like the back of my hand so to take on a PI or GPZ was a challenge.
      Over time I've started using the GPZ a lot more and the results are showing, I've certainly improved in my gold take, very rarely do I get a skunk now when I used to get a skunk 2 out of 3 trips when using the VLF detectors or the GPX.  I can't really include the QED in the equation as I didn't have it long enough before getting the GPZ so it hasn't had the hours the GPX, GPZ and VLFs have had.
      The other day I found a couple of bits of gold with the GPZ and 15x10" X-coil and they were not yet dropped into my bottle of gold so I thought they'd make good test targets as I wanted to work out for myself if I would be disadvantaged using the GPZ over a VLF on small gold targets in the ground.  As the soils in NZ even in gold country are very mild burying a nugget at a depth doesn't seem at all different to finding one naturally with the target signal.  With the Gold Bug 2 widely accepted as the most sensitive VLF on small gold I decided I'd use that as the comparison detector.    I did this test to prove it to myself more than anything but after doing it I thought I may as well repeat it to show the good people on the forum what I'm experiencing.  It's not a scientific test, it's not anything more than me proving to myself why I should use the GPZ over a VLF.  
      I used the 8" X-coil on the GPZ as it's possibly the most sensitive to small gold, although it may not be as the 8" is bundle wound to be able to fit the windings in such a small coil where as the 15x10" that I found the gold with is spiral wound or flat wound as some call it.   The flat wound coils are generally more sensitive than the bundles, so I'm not sure if the 8" is more sensitive than the 15x10" and the bigger coil did find the nuggets in the first place.  The 8" certainly has the size advantage which usually means more sensitive, it is also unbeatable for in rough rocky terrain where the 15x10" is difficult to get to the ground.
      So I went down to the river behind my house to try it out, I go there as my house has too bad EMI for the GPZ, the disadvantage of going there is a lot of hot rocks which trouble the Gold Bug 2 but not the GPZ, so I had to first dig the area out, remove all the hot rocks by using the GB2 to find them and then refill the hole.  I dug out a much bigger area than I was using to be sure no rocks would interfere with the GB2 however I missed one to the right of the hole, far enough off to not effect the results but I do hear the GB2 find it when I pass over it during filming.  After doing it I thought I should have put my harness on and used the GPZ how I do in the field with the sP01 enhancer/booster and external speaker as for the video I was just using the WM12, and it gives poor audio compared to the sP01, the targets stand out MUCH more when the sP01 is used.  I may redo the test and post a video with just the GPZ using the sP01 to show the difference between using it and not using it next.
      Anyway, here is the video, I put little captions on it so it's easier to understand what's going on.
      I think I've proven it to myself I should focus more on using the GPZ and less on the VLF's...... JW will be happy with this revelation. 🙂
      By the way, a GIANT thank you to Dr Lunk, he read my post where I found the two nuggets used in this video where I was talking about the bad vertigo I've been having the past couple of weeks and advised me of an exercise method that can fix it and fixed it for him so I looked up what he was talking about and found this video

      I followed the instructions in that video and within about 5 minutes my vertigo was fixed, weeks of suffering ended with a few minutes of an exercise technique.  Incredibly amazing so thank you very much Lunk, or as I call him Dr Lunk.  It's been two days now with no dizziness, and it was resolved immediately after doing Lunk's exercise technique.  I've even stopped taking my anti-dizziness/nausea drugs.
    • By idahogold
      Cheers" from 20f Idaho! Way to go Bill! 😃 Ig
       
    • By phrunt
      I went for a gold hunt with JW yesterday, he has a sore foot as he was prospecting last weekend and walking up a steep bit of hillside and heard a pop in his foot then very bad pain and could hardly walk.  He's still not sure what the problem is, he had 3 x-rays and no sign of a bone break so he is just taking it easy.  I'm suffering from Vertigo and have been for the past week or two, it came on from nowhere about 2 months ago when I was skiing and come right in about a week but now I'm having a second run of it, the doctors know what it is and it has a huge name which I've forgotten now but it should pass in another week or two, I just have random dizzy spells that last for about 10 to 30 seconds, and when I lay down it's a lot worse than when I'm upright.  For this reason we went to a very close spot where there was little walking required for JW's foot and my dizziness.  It's right near as residential area, for example most of the time I was detecting I was looking at a row of houses.
      I'd never detected this bedrock before, I've been past it a zillion times though and JW hadn't done it since his GP3000 days I think it was.
      We're both using our 15x10" X-coils lately, we are both a bit surprised how sensitive they are as we were always using the 10" for maximum sensitivity then JW put on his 15x10" and was finding absolutely tiny gold so I too did it too and haven't looked back, more ground coverage while maintaining the sensitivity of the 10" due to it's spiral windings when the 10" is bundle wound.  I got the 15x10" as I thought it'd be good for ground coverage and finding slightly bigger gold so to find it's more than capable of finding the tiny stuff was a pleasant surprise.   Some of the gold I've been finding with it could probably have been found with the Gold Bug 2 and it's little 6.5" coil ,Nox with 6" coil or the GM with it's 5" coil but to cover the amount of ground with those tiny coils vs using a 15x10" coil would just take so long, with the 15x10" you can cover ground very quickly in comparison while maintaining similar sensitivity to these high frequency VLF's so you do have more chance of finding gold in far less time.  Obviously the smaller coils are MUCH better in locations where their size benefits you greatly being able to poke and prod in among rocks and lumpy bedrock, in these more flat locations the bigger coils are better for ground coverage.
      The ground around these areas is full of shot gun pellets as there is a big rabbit problem, we saw hundreds of rabbits bouncing around on the small walk in, most were little babies too that the parents had sent off to play for the day while they get much needed mating time I guess 🙂

      This rabbit hole was quite funny, the little guy spent a lot of time digging a nice hole out, only to find its a short little trip into a dead end of bedrock 😁
      As there are so many shot gun pellets the GPZ can actually be a bit easier than using a detector like the Equinox, the Equinox will give you a nice 1-2 target ID on a pellet, the exact same as small gold nuggets, the GPZ will do a double blip on the surface and near surface pellets as the separate windings pass over them so it's a good indication it's a shallow target, you start to learn after passing over and digging hundreds of pellets what they sound like, they all have the double blip but you also get used to their volume level and sound so you can gradually start to ignore them, with the small gold coming in various shapes and weights the noise and double blip of shallow gold isn't as consistent as the pellet noise, especially after a scrape if they move you can mostly ignore them.  It is a gamble but it's necessary in places with so many pellets.  Shallow gold can do the double blip too but it's volume/sound can often sound a fair bit different to pellets.  Any out of the ordinary double blips are certainly worth investigating.
      It was only about 20 minutes after arriving and I had a good target sound it wasn't a double blip but it did have a nice target sound, wasn't a booming target that's usually a bullet shell or something, just a nice gold sound.  I scraped the grass off the bedrock and the target was still there, very positive sign.

      You'll see in the photo above where I scraped the grass away.

      Sitting on the bedrock was a bit of gold.

      You can see there the cleaned out crack where I got it in the middle of the photo.

      And the location above where it was found on some bedrock up quite high off the ground.

      0.124 of a gram, a decent size for me.
      I was finding a lot of pellets, not necessarily digging a lot of pellets, about 20 fooled me in the 2 or so hours we were detecting, we cut the trip pretty short due to our health issues.
      Not much further along the same bedrock I had another good signal,
      I had to scrape out the crack and smash away at the bedrock to break it out, this one took me about half an hour to recover as I'm always very careful smashing out the bedrock as I've lost gold before when smashing the bedrock and then the gold goes flying off into the air never to be found again.

      It ended up being quite deep, at least 10cm, I had to smash a fair bit of rock out.  I was breaking a bit out, cleaning out the crack, checking it's still there, then repeating the process over and over again, slowly and cautiously as it just had to be gold.

      This is the depth it ended up being, hard to see in a photo.


      It was a tiny little nugget in the end.  0.074 of a gram, it's sitting just above the X-coils branding on the coil in the photo above.  I was very confident I had a nugget so I took a short video showing the target noise prior to smashing out the bedrock.
      You'll see it was a pretty unmissable target.

      And this was it's location on the bedrock, you'll see the dug out crack in front of the coil.

      0.074 of a gram.
      Not long after this I decided I couldn't keep going, the bending over digging all the time was affecting my dizziness, and JW was sitting down having a rest due to his sore foot I guess so we decided to call it quits for the day.  He also found two nuggets, his bigger one was probably .4 of a gram and a smaller one similar to my 0.074, possibly even smaller.
      Some more seasoned guys finding big nuggets in OZ may wonder why I even do a post about two little nuggets, I get a lot of feedback from people learning like myself who enjoy the posts as they find them educational, If I help one person with a story like this then it's been worth it, it's not easy learning to find gold, and any help is good help.
    • By Ryan
      Well I have now gone through a second GPZ stock coil cover. Has anyone tried out the Nugget Finder coil cover for the 14x13 and if so how have you liked it? I am either looking at one of these or somehow modifying my stock cover to extend the life. If the stock covers were only $10 I could justify the reoccurring cost but at almost $50 ..not really.   Thanks
    • By Norvic
      Some criticism has been levelled at the X coils on the GPZ in regards to the coils cable mod bricking the GPZ, myself the two Zs I`ve used for many hours have displayed no such problem, I know of one DP forum member who has reported this problem are there any other users who frequent this forum who have experienced this? Also Dave as the distributor of the Z coils how many customers, in the US,OZ and NZ, no names but numbers if possible who have contacted you with this problem and approx. how many X coils have you distributed, ie how many X coil users are out there in these 3 countries. Whilst it is not a major concern to me because I`ve personally not experienced such a major issue, it is of interest, thus a topic to cover this X coil problem.
×
×
  • Create New...