Jump to content

Recommended Posts


Thanks for the good word, glad you like it. Paint job does look good and makes the original look a bit plain.

I am busy making a batch and will post when they are ready.

Here is a link to the post last year.

 

  • Like 3

Share this post


Link to post
Share on other sites

Looking good.  Enjoyed testing out one of the prototypes and the production unit looks really sharp.  The unique handle design provides leverage and a natural, secure grip.  The blade cuts nice turf plugs and also can take on some small roots. Good luck , kac, looks like a winner.  Thanks for letting me give it a go.

  • Like 4

Share this post


Link to post
Share on other sites

Kac, Glad to hear you got a few orders for the digger. I'm pretty sure those people will be very impressed with it. It's not very often you find a great product. Good luck in the future!!! I'll be contacting you with an order for a taller version.

  • Like 1

Share this post


Link to post
Share on other sites

Thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By AlbyM
      Hi all,
      I just bit the bullet and purchased a Nemo Blu3 portable dive system as another tool in my metal detecting arsenal. For those who don't know about the Nemo, here are a couple of videos that show what it can do:
      I'd love to compare notes with those here who are using a Nemo Blu3 with their Nox underwater. I haven't used it yet myself as I had to put it in my shipment to Vietnam, where I will be starting a new job in a couple of months. So I'm just doing a lot of research at this point.
      The only problem I am hearing so far is that the Nox can be difficult to hear underwater over the Nemo Blu3 regulator whether you use the Minelab "yellow" underwater headphones or don't use headphones at all. For anyone using the Nemo with their Nox (or diving at all), have you been able to find an alternative underwater headphone with better sound or another workaround? Thanks in advance!
    • By phrunt
      Thanks for that, very interesting.  It shows if Tarsacci wanted to make a gold prospecting detector based off that technology they could.
      I also very much like your scoop, that's very similar to the perfect design scoop I want to get. 
    • By spandexlurch
      Hi everyone, first post. I'm currently new to metal detecting and I am using a loaned Whites 6000b coinmaster. I haven't dug anything but junk so far but I'm considering buying my first detector. My coworker has a Minelab CTX 3030 and I don't imagine I'll buy something that expensive as a beginner. I was looking at the Minelab Vanquish 540 or the Garrett Ace 400. I know very little about the different detectors but not looking to spend over $500 on my first. Any help would be greatly appreciated.
    • By pinpointa
      Hi Guys,
      Has any members got or used the Radius Root Slayer coin hunting. Have noticed they have a very narrow one which tapers in which would give you a small hole.
      Regards .
    • By Doc
      This is a demonstration of the Gold SPOT™ being used as a portable gold pan.  It's extremely effective.  Don't worry about the first few minutes where I am out of frame.  Leo Aranza, my buddy, takes over and the rest of the video is well framed. -Doc
       
       
    • By Lobo Exp
      I just recently got one of these Russian boards, which IMO looks like a good piece to work with. I read over the supplied build instructions which are fairly clear, but in a way are not totally, at the same time. I have worked with circuits quite a lot over several years, I went back to a site that discusses working with timer IC's of which in this build uses the 7555, a CMOS version of the vaunted 555 that uses 1/10th the power. This is where the MD transmitter freq. is produced. There are several ways to construct the oscillator and in the case of this design, I find one very small issue. Since as I mentioned, I just got this board and still working at putting it together, obviously I haven't tested it. Here is what I am here to discuss with anyone looking at this version, thinking about building one, or has one working. The 555 system has been know to experience unstable responses if there is no Capacitor connected from pin 5 to ground ! There is no Cap to pin 5 included in this circuit design and it uses a few other features that differ from the basic osc. circuits  A .01ufd cap which on this board can be installed on the back side of the board from pin 5 to the nearest ground buss and should be some improvement to the function and stability of the circuit, it is 'optional' and it will work without it. It is a very small mod but in my experience sometimes that is all it take to work or not. I also suggest to use .100 inch header pins for connecting any of the peripheral parts. Doing this makes it easier to R&R the board for working on it, you will need to be extra diligent about connecting everything back in the proper place but if you have gone this far with this project, that is a no brainer. There are a couple of places the .100 header pins will not fit perfectly but you can get around that with the use of a single break away pin and just a tiny bit of force to re align so your connection will fit as you continue assembly. 3 pins on the right of the rough GB Pot on board are one place, another is the 2 holes just to the right and above the 4 large elect. caps around the Vreg, LM7808 or LM7809, also using a 7809 might give you a slight bit of bump in performance. Since the circuit uses a +12v supply battery, there is still a bit of margin left so that the dropout V is going to remain above the output V of the regulator until batteries are getting too low. Using a battery carrier that holds 8 AA cells, alk or even NiM rechargeables will or should work and you should still be able to get this inside the housing. The use of NiM may exhibit an issue with the 7809 so make the choice based on what battery V you plan on using. One could also use an extra bat pack in series to push the V higher for the input, as the 78xx can handle up to 30v input, this will give you a lot more operation time before the dropout V becomes an issue. I would also think installing some reverse polarity protection here, 'NEVER a bad addition to any circuit and simple, a couple of small diodes and a fuse added to the project, around a 200 milliamp mini fuse is a good rating, put some extras inside the case. The current draw of this unit is very low so you can run your batteries way down this way and still keep going, having a small solar setup would be a good thing to have with you to boost batteries also, you could make it to fit over your hat!!! I am in the U.S. and have considered doing assembly of projects in the future,,, if my board works out. The one good thing I like about this system is that it should work with several different coils out there and one can even construct their own coil if using careful attention. Coils are really not that hard to make if you have and follow the instructions. Making the casing is probably the worst part of it, using resins and hardeners. Shielding is a bit critical here. I will mention that it is almost essential that you have an oscilliscope to build one of these for adjusting the timer section freq. the 5k pot on the left side of the 7555 and also setting amplitude on the upper right of 7555, the one just left of the 14 pin IC spot.. If you don't have a scope, there are apps online that make your PC work as one and you will have to learn how to use it, or get someone that knows to help with it. Also a transistor tester is helpful and when working with these parts, you MUST know the pins and install them RIGHT if you intend to have it work but you already know this if you are thinking about assembling one. 
×
×
  • Create New...