Jump to content

Recommended Posts


Yes, This is helpful!  GaryC/Oregon Coast

  • Thanks 1
Link to post
Share on other sites

Nice easy to search menu you came up with Steve!

Link to post
Share on other sites

I will add things as new information develops. This proved handy in the Equinox forum, and helps new people get started. There are less repeat questions and one handy place to aim people with questions.

  • Like 3
Link to post
Share on other sites
  • 4 months later...
2 hours ago, Dirty Mudlark said:

For more informations about Fisher Impulse AQ find here some news :

    https://www.facebook.com/groups/fisher.impulse.aq.questions.reponses                                          

Private group, Facebook.... no thanks.

Link to post
Share on other sites
10 minutes ago, Steve Herschbach said:

Private group, Facebook.... no thanks.

Ditto.  I hate Facebook and don't want anything to do with private groups.

 

  • Like 1
Link to post
Share on other sites
16 hours ago, Steve Herschbach said:

Private group, Facebook.... no thanks.

 

16 hours ago, Badger-NH said:

Ditto.  I hate Facebook and don't want anything to do with private groups.

 

It is your choice, i respect and understand but it is a serious group, with passionate members of all nationalities, and Alexandre Tartar, the engineer at the base of the project participates by sometimes giving technical details, then the place of this group is unquestionably legitimate.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By tvr
      Walked down to the local watering hole; brackish water bay tributary, pretty well cleared out over the years but a bit trashy with bits of iron. Ran delay 7, sensitivity 7, threshold 4, volume 8, ATS 6.5, reject 6; mostly all metal but some tones and mute to check targets.
      Initial reaction is that it is a little easier to hear the edge modulation with the 8 inch than with the big coil. I walked away from several targets that were very pronounced double tones then had a more subtle edge that I told myself to walk away … but dig to verify. That was the little fish hook. The odd shaped washer, to the right of the fish hook, fooled me; it sounded pretty good in all metal and in tones. The rest of it is all non-ferrous. Some of the small targets fell through the scoop several times before I finally capture them and got them in the pouch. This set up finds fairly small targets well. Tones seem to be more pronounced to me with this coil than with the big coil with some similar settings, yet I think I still hear iron better in all metal than in tones ... maybe some setting tweeks would change that around but I'm pretty happy in all metal.
      I did have an interference issue. A boat about 100 feet from me fired up and the AQ talked and talked. Stepped through the frequencies and no help there. I was shallow enough the detector head was above water so I went deep where the detector electronics were well under water and, surprise to me, that did not help either. Dropping the sensitivity down to 2 made it usable. Once he lowered the boat lift, backed off and motored away I could turn the sensitivity back up and hunt with a very quiet AQ.
      Did have a great blue heron land on the beach and walk into the water. Got about 30 feet away from me so I stayed still and watched it turn its head looking for minnows, catch and eat them. After a few minutes it walked around the beach corner towards the boat lift then flew about 2 hundred yards down the water.
      A good afternoon in the water.

    • By Mikeguard01
      Didn't get out this past week since I was under the weather.
      Started out with the detector being really unstable. Water got into the coil connector. Blew the water out of the connector and tightened the back-shell and everything was good to go. I also have noticed when I'm in shallow water she's a little noisy and a lot of falsing (water way below the connector). She's pretty stable when completely covered. I do run my machine hot in all metal.
      One old beach I hunt always has sand piled in to the one side. No sand movement in this area other than more accumulation. For years I said there has to be targets just out of detection range. Well not for the AQ. I did find a few targets in this area. I had to work slow since these targets were pretty close to the depth limit and I was running hot. A few pieces of crusty Silver and a nice 10K ring dated 1946.
      HH
      Mike





    • By cjc
      Really liking the audio information of this detector.  If anyone wants to look around there's a great video on the reactivity that shows what it will do.  Seeing this showed me how differently the machine is responding well to elongated targets if you change your sweep direction, "feel" around and listen for the double tone  or anything that is not centered.  For a pulse I dig very little with this detector.  While there are certainly hoop earrings, crosses and other targets that would probably sound similar, overall the potential is there to really develop some accuracy.  I also like how it "discriminates" between non ferrous and anything that's blending into the ground--including caps (wide / narrow).  My beach is very sanded in now but the potential for getting 20" gold with this machine is very exciting.  The video shows that  its a detector that learning and using your basics with will pay off. 
      cjc
       
    • By okara gold
      I've been using the 8 inch coil exclusively in the salt water for about 18 hours now. It is definitely quieter than the 12.5 inch. I am running with a delay around 8 or 8.5 and today 9 because of some bigger swells coming in right up against the shore. Played around with some higher delay settings and things quiet down even more. If walking parallel to shore in the water, there is still some "noise" when sweeping from the shallows to deeper water as can be expected. Coming back from deeper to shallow...all is quiet.  Coil sweep speed and height control still play a key part in keeping the threshold smooth. It seems more sensitive to smaller objects and some iron will still give a double blip in all metal. Sensitivity was set at 6 and ATS around 5.
      I'm wondering... Say you run the big coil with a delay around 11 and the small coil with a delay around 8... which one would have better punching power on ring size objects?
    • By tvr
      Nice week of beach vacation swinging the AQ. Saw one other person detecting. He had an older Garret Ace and was using a garden hoe to dig. When I walked towards him to say hello, he pulled a mask over his face and turned away, so I turned and went on my own way.
      Had one resort where I got interference when detecting in front of it. Found one frequency setting that was a little better. Turned sensitivity down to 3 and could hunt the wet sand. Delay and ATS settings did not appear to make any difference. On our last day of the vacation there was a nice cut in the water that ran half a block long and part was in front of this resort. At low tide the cut ran from knee deep to belly deep. It was protected by a sand bar that cut the waves coming into the cut to about 6 inches. I was surprised when I got in the water that the interference actually got worse. Tone, mute, volcanic were all noisy, all metal was best and if I had my back to the building, standing between the detector and the building, it got quieter. Dropping sensitivity to 2 quieted things pretty well. While increased delay did not seem to help over the wet sand, it did in the water. The little bit of wave wash did not make a sound at these settings. Settings were Sensitivity 2, ATS 6, Delay 11, volume 7, threshold 4. I found the sterling hoop earring in this cut, bent it digging it up. Also found a blob that I dug a small trench to get it out. Almost gave up on it, flipped to mute turned ATS to 8.5 with reject on 6 and it did not go away so I went back to all metal and kept digging. Encrusted piece with some pretty gold color showing. It cleaned up nice after a few hours soaking in a salt and vinegar bath and is a sloth pendant that the loop broke off of; unfortunately, plated. The ring that was an 18 inch deep wet sand find where I was hunting with ATS around 4.5, sensitivity at 4 and delay at 7.5 is also plated.
      I still have not played with the 8 inch coil except in my yard. I need to get it in the water soon.




    • By Mikeguard01
      Hunted a few hours with a good friend today. Half of the hunt was in All Metal and the other half in Tones Mode.  I dug everything today trying to learn the machine. Those Corona caps became predictable in Tones Mode. All Metal seems to run a bit more stable and punches really deep. I originally thought the piece of a bracelet I recovered was junk until the 10K stamp was pointed out. No sign of the rest of it in the area, but Ill take it.
      HH
      Mike


×
×
  • Create New...