Jump to content

Recommended Posts

Probably a new super duper timing added. 5 usec. I could go for that as "new tech". The GPX's are such a wide range machine already, all it would take to be of interest is something worthwhile. Not particularly a GPS unit either.

Link to post
Share on other sites

  • Replies 38
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Just stuff a GPX in a fully waterproof Equinox housing for under a grand and I’ll be fine. 

For me, it has to have performance greater than the 5000. I couldn't care less about batteries, leads, speakers or screens. Performance is the only reason ill upgrade a detector. If its better ill buy

Attached is trade mark application for GPX 6000 - as i have previously mentioned we have had sightings of unidentified Minelab Detector in Adelaide Hills (South Australia) with rumours that it is a ne

Posted Images

2 hours ago, Gerry in Idaho said:

ealize the GPX-5000 was $5800 at one time and then they dropped them to $4000.  We dealers have been wanting another detector in the $5000 to $7000 range as there is now a big gap (GPX-5000 for $4000  through GPZ-7000 at $8K).  They just fazed out the GPX-4500's so I (don't know shit) would hope the GPX-5000 at $4K would stay around a while. 

 Take a look, now you can buy the GPZ even at Walmart, for $10k!.....Gerry, I bet people get a better deal with you 🤣🤣

walmart gpz.JPG

Link to post
Share on other sites

It's more the gap between the GPX 5000 and the GPZ 7000, it has to fit in there.  They're saying it's not going to take over the GPZ as the flagship.  There isn't really that much wiggle room between the GPX 5000 and GPZ I don't think, other than improving weight, ergonomics, modern electronics and a screen rather than the old knobs and switches.  Maybe waterproof might be the big thing..

I'm sticking with my prediction of a GPX in a GPZ style housing, with another timing or two in the mix, wireless audio, and waterproof.  It'll have the GPS of course and a modern spiral coil, maybe come with a couple of coils to help justify the price.  I hope they've done some form of new discrimination but if that required DD's it would only be used on some occasions.

I understand what you're getting at Jason, it's just to fit in between a GPX 5000 and the GPZ.....  If it was a GPZ replacement then I'd expect a whole lot more.

Link to post
Share on other sites

Just over 2 years ago Minelab released Equinox which performs (imo) as good as (or better) than Etrac and CTX3030 which both cost way more, add that Equinox is fun to use and you have a market winner. Therefore there is a good chance that GPX6000 will make a similar technological leap and put us into a world not as we know it.

Im sure Minelab realise that if they tick all the boxes from their market research they will have another market winner - a slight improvement to the GPX5000 will not be accepted by their savvy customers and a flop will affect Codans share price - so its serious business for these guys. Luckily South Australia does not have community Covid transmitted infections at the moment unlike Victoria where the state is closed down so with a bit of luck the Sept release date reported will not be affected.

At the moment all we have is a price point and name. Will be interesting to see the real thing.


  • Like 2
Link to post
Share on other sites

I wish the GPX 6000 was housed in a excalibur housing, as opposed to the CTX/GPZ style housing. Just make it waterproof (for real 😄). If they just made the EMI mitigation better, then I would be happy with just those two advancements. Adding some extra depth to it would be icing on the cake for me. I know it's a gold machine, but acknowledging the fact that it is a great relic and beach machine would also boost sales. 

Link to post
Share on other sites

Seta and GPX were both trade marked separately in 2009 but appear on the same detectors.

Multi IQ and Equinox were both trade marked separately in 2017 but appear on the same detector.

Geo Sense - PI and GPX 6000 - both names were filed for trade mark in July 2020 - Im guessing we are going to have a GPX 6000 incorporating Geo Sense - PI. What is Geo Sense - PI? Maybe its an adaption of ground penetrating radar (ultra wide band impulse radar) combined with pulse induction technology from the military MDS-10.

Timing - Looking at prior trade mark applications for the equinox and vanquish - it took about 6 months for the trade mark to be granted and product was launched from 3 to 9 months after the granting of the  trade mark. So GPX6000 should be granted by the end of 2020 with launch somewhere between March and September 2021.



  • Like 1
  • Thanks 1
Link to post
Share on other sites
3 hours ago, VicR said:

Maybe its an adaption of ground penetrating radar (ultra wide band impulse radar) combined with pulse induction technology

This could challenge ZVT and perhaps challenge the 7000 franchise

Link to post
Share on other sites

I have a 5000 and a 7000, the 6000 would have to be super special to entice me to buy one. Have to give ML credit for always looking to improve their products. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By phrunt
      The other day I fixed a problem with my GPX that I'd been meaning to do for some time and never got around to it as I don't use it much anymore, and since I had it out of the cupboard again and all the talk of the GPX 6000 and it looking like it's wireless without the battery on your butt I figured I should finally get around to knocking up a way to hold the battery onto the side of it so I don't have to strap up like a turkey as some call it wearing a harness with a battery on my butt.   This was the thing I disliked about the GPX the most.  I now often just use my GPZ and 8" X-Coil and doing this I don't need any harness as it's nice and balanced and light enough to swing all day, the audio is wireless to my WM12 and I don't need a bungee.  It makes for very comfortable detecting.  My liking for not being tethered with the detectors all started with my QED which is the ultimate light weight PI, it is no different than swinging a VLF all day.  The QED came with a little Logitech X-50 Speaker that has it's own built in lithium battery that lasts about a day's detecting and it has extremely good loud audio, and also volume control buttons on the speaker.  The QED has a special mount to use the speaker on the QED, the mount doesn't fit the GPX shaft. 
      When I was a big user of my GPX I had the harness on with twin speakers using the Steelphase SP01 and cords all over the place linking it all together with the detector, battery, speakers and so on.  Some people are OK with this, I am not.  I get all tangled up all the time 🙂
      I was making a mount that would work for the GPX as well as the QED after I accidentally broke my QED mount by knocking my QED over off a rock.   I didn't want to bother getting an official mount so I figured I'd make my own.

      This is the Logitech X-50 speaker, it has a strap area you can see down the bottom right to hang it off things, the official QED mount goes through that to hold it onto the QED.  You'll also see the volume up and down buttons and a power button in the middle.  It's actually a bluetooth speaker but I don't need to bluetooth side of it.
      a while ago I'd bought a few Bicycle torch mounts for about $3 each from China and it seemed to be the perfect thing to use to mount the speaker.

      They can be adjusted to shaft size so they fit the QED and the GPX.  They also can be detached so one part of the mount pops off the more difficult screw on bit so I can easily pop off the speaker for charging without having to unscrew it from the shaft.  A little bit of chopping and hot glue and I have myself a QED/GPX Powered external speaker on a universal detector mount.

      It quickly just slides on and off it's shaft mount.

      The speakers are really loud too, as loud as my SP01 connected to the twin GME SPK07's was.
      I also have a Quest Wirefree mate that I can use on my GPX if I want the audio to be wireless to some headphones.

      Great little gadget for anyone thinking about getting one, batteries last for days, super fast audio designed for detectors and it has a volume control knob on the part that you keep on your body, it also has a belt clip.  Basically turns any headphones into wireless headphones.
      Now the last piece of the puzzle to get my GPX cordess without spending any money on it which I didn't want to do as I don't use it often now was to sort out the battery.  I was always going to go one of the Lipo battery setups a lot of people have done for a small lightweight battery option, I just never got around to it before replacing my GPX as my primary detector so I figured I will just find a way to mount the battery to the control box, all this involved was some left over webbing from when I made carry straps for my sluice along with a few dome button things, I already had these lying around from another project with my boats cover, they're stainless steel too so won't rust 🙂
      I just popped a few domes though a couple of strips of webbing and wala.  I can now use the GPX battery pouch that came with my GPZ's harness to hold the GPX battery onto the side of the box.  It holds on tight too, it ain't moving.


      So my mission virtually complete, All that is left is cutting the power curly cord and shrinking it's size to keep it neater but that can wait for another day, until then I'll just keep it tucked up inside the cover.
      So there you have it, I now have a tether free GPX and it cost me $0 using stuff I already had laying around.  I don't mind the battery's extra weight, seems to make the coil feel a bit lighter.
      And I can still pop off my Logitech speaker and mount it on my QED, I used a second one of the torch mounts to have an attachment point on my QED so I don't need to do anything, slide it off my GPX and slide it on my QED. Perfect.  If I was actively using it as my primary detector I'd probably just go a Lipo battery and mount it on the side but this is fine for the irregular use it will get.
    • By phrunt
      Ok, so my GPX has an issue, I know exactly what the issue is and I know what part I need which is the Mylar strip, what I need to know is if the part number of the GPX 4500 is the same as the GPX 5000 part., it appears to be so.  Unfortunately Minelab don't let you purchase internal components or find out anything about them without logging in to their website as a repairer.  The local service agent won't sell me the part but I have access to a GPX 5000 part by other means, however I need to know if the GPX 5000 Part is the same as the 4500 part.
      When I bought my GPX second hand the seller didn't tell me about a fault with it and he denied it had a problem, I quickly found out on my first trip out with it and dismantled it and did a fix on the issue which is a crack in a trace on a ribbon (mylar) cable however as the cable flexes with use the repair isn't ideal, hot glue to hold the cable more stable after scratching the surface off and using a solder trace repair pen has helped and works most of the time but it still isn't perfect, I want to replace the strip for a perfect repair.
      This is the Minelab link to the part for the 5000 https://parts.minelab.com/5902-0117-01-p/5902-0117-01.htm
      This is a link to a Russian website taking about the part and it indicates the part is the same for the 4500 and 5000
      This is what the part looks like

      Does anyone have the ability to login to the Minelab website to see if the part for the 4500 is the same part number as the 5000?
      A guy showing the milar strip causing his threshold knob to stop working.
      It seems they're a common failure part from what I've been seeing which is no surprise at all, they fail a lot in all electronics and something that has a rough life being banged around with it flexing a lot is at a higher risk.
      Here is Woody repairing one which is my backup option using a wire bypass as mine just has a crack in a track.
      He also indicates in this video they fail a lot.
      Any help appreciated, although I've already got the GPX 5000 one on it's way, I was just hoping it verify it's correct before it arrives so I don't have to think about it 🙂
      And this is what I think of Minelab not selling parts as they want to make money in labor repairing detectors...... this part really feels like a planned obsolescence part 👎
      I'd buy any faulty GPX's I can get my hands on as in all likelihood this will be all that needs replaced, a $15 USD part.  Basically that strip is the arteries of the GPX, any break in a trace and a function will fail, be in the screen, knobs, power, everything, it's vital.
      Part number: Minelab 5902-0117-01
    • By KrisDeVo
      Going back out to a place I've been to a lot but with a twist. Finally talked my buddy into flying me out with his helicopter. We went last week but only got on the ground for a few minutes before we had to leave because of weather. In 5mins I had a little nugget (pictured, soaked in muriatic acid). I mined in this area last year running a test for hard rock. On out days off we went out with the detectors, GPX5000, GPZ7000, SDC2300, and two gold bugs (not sure the models). The gold bugs crushed it and the SDC2300 next and then the 7000. The 5000 was last. Non of us really are proficient with any of these. I maybe have 50hrs on the 5000 over the past 4 years. A lot of the pieces are small and kinda wiry.
      So im going back up with the 5000 and would like some help on recommended settings to start with. I have 3 coils. The two that came with it and a small 8" mono. What would you guys recommend? Thanks!

    • By Steve Herschbach
      As revealed in this thread the new Minelab GPX 6000 has been submitted to the FCC website for Bluetooth compliance testing. The pdf file showing the label location offers up the picture below as a teaser.
      From the Confidentiality Letter:
      "We are requesting the commission to grant short-term confidentiality request on the following attachments until 19 October 2020. External Photos, Internal Photos, Test Setup Photos, User Manual"
      So in theory by October 19th at latest we will have photos and a user manual available for download. I am sure Minelab wants to put their own spin on it all so I assume we will have an official announcement before October 19th.
      Since the FCC listing confirms there really is a GPX 6000 on the way I have added a Minelab GPX 6000 Data & Reviews page in the detector database where I will add any reliable information the moment it becomes available.

      Minelab GPX 6000 metal detector
    • By Swifty
      Found on one if the groups I belong to. Now the question is Real?

    • By GhostLands
      Hey wassup guys!😀
      Theses are my last 3 hunts with my brand new GPX 5000! I have 4 coils : Commander 15x12 DD, Commander 11" Mono and Double-D, Coiltek 14" Mono Elite. 👍
      I only used the 11" Double-D and the Coiltek!
      I have been learning a few things with Gordon Heritage from UK! 
      These are all finds from areas where i hunted before with other machines! My main machine is the Equinox 800!
      I'm very pleased with the GPX!

  • Create New...