Jump to content

ORX HF 9" - Coin Fast - 54 kHz - 3 Reaction - Proves Itself On The Hill Of Many Nails


Recommended Posts

Just got the HF 9 so i took it out for its 1st run on the hill of nails , this has been pounded till nothing sounds off  but this combo maniged to pull two targets out in about 10 Minutes and the 1st one had 3 nails in the hole . The rivit washer really suprized me becuase it came in so clear in the one spot i always detect. I can only say this thing really can find the leftovers that nothing els can find  Now i dug a few false cut nails but it was giving off the iron sound mixed in . but that ting you see that was a solid 14" deep and it was making a sound like a silver coin makes and repeatable . i was about to stop digging because i knew no silver coin would be that deep as 7" is about max for this 54KHZ if you really listen , but then i hit the ring .  not a bad coil at all

20200730_185907.jpg

20200730_185915.jpg

20200730_185949.jpg

  • Like 5
Link to post
Share on other sites
  • Steve Herschbach changed the title to ORX HF 9" - Coin Fast - 54 kHz - 3 Reaction - Proves Itself On The Hill Of Many Nails

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Kaolin washer
      i HAVE been using the Hot program in full tones, with the HF coil and 28khz , I have been amazed at how good it is at telling iron from non iron , and tells me more about the iron in the ground , like is it round iron flat iron  and really good at telling me how big the iron is . I took it to iron hill and its finding 22 slugs, shot shels, brass, right now i would have to say its my favorite,  i do check it with the deep , program. the deep seems like the Equnox to me  prone to false on cut nails. but so far the hot has been hot and good and hot
    • By bigtim1973
      I have been forcing my self to use my Deus more here lately. I am finding that I like the Deus very much. For the most part I am using Gold Maxx and deus fast. I have a custom deep program I use as well. 
      What I am getting at is i am not really using as many of the programs and settings. I fiddle between 2 for the most part and some times 3. And that is Deus fast and either gold Maxx or the deep Custom one I made. 
      I have been thinking of selling either my Deus remote set up and keeping the ORX or selling the ORX remote set up.
      I like the ORX for the large easy to see screen and iron probability bar. Plus I only fiddle with the coin programs anyway. 
      I  actually favor the ORX to tell you the truth.  
      They are slightly different animals. And each has their own strong points. But target and depth between the 2 are equal. 
      Who else has the same delima??
    • By bigtim1973
      Ok so according to the manual of he deus with the white HF coil the target ID normalization is fixed on and supposedly it will not give you the option of turning it off. 
      So yesterday in my test bed on my zinc penny I noticed in 14 khz the ID was 72 to 76.
      When I bumped over to another frequency of 31 khz and went back over the zinc penny the ID jumped about 10 segments to 86-88. 
      I thought the id Norm was supposed to be fixed on the HF coils????
      Am I doing something wrong here?
    • By bigtim1973
      I went to a friend's house and detected his front yard with my ORX. House was from the 50's. Found some old clad and a few wheat cents and some other odd and end stuff. After a while I did not get any more coin signals. There is the odd and end junk left but no more coins with the ORX.
       
      I took my Deus over there the other day just to cherry pick for coins. Did not find one. Not even a zinc penny. 
       
      I think that is pretty impressive.
       
      Just wanted to share with you guys.
    • By phrunt
      Multi frequency
       Wireless detector
       Ultra lightweight FROM DEPAR!
      DPR6000 is a high-tech metal detector capable of exceptional performance. The DPR 600 has been designed and manufactured in France to give you the ultimate Gold Prospecting experience.
      The DPR 600 is innovative in terms of metal detector design as it offers an unique system based on different elements communicating via a digital radio link. In this new design the coil, remote control have each been made independent through the integration of very compact, high-capacity lithium batteries.
      An ultra-miniature electronic circuit, incorporated in the search coil, digitises and analyses the signals. Data is then sent to the remote control in real time via a digital radio link. With this method, the signal is processed at source and not conveyed via a wire link, which greatly improves data quality.
      Incorporating components from leading-edge technologies such as scientific instrumentation has enabled us to produce a powerful, rapid, lightweight, compact and fully controllable digital detector.
      Whether you are an experienced user or a beginner, The DPR 600 lets you decide whether or not to modify any of its settings. Powerful pre-configured factory programs enable all users to get started immediately, while expert detectorists can choose more advanced parameters via the intuitive interface.
       
      Seems like it would be good, I've never heard of it or anything about the detector, made in France
      http://www.depardetector.com/product/depar/dpr-600/912/511
       
    • By Steve Herschbach
      Depar DPR600 User's Manual, 4.4 MB pdf file, 30 pages
      XP Metal Detector Forum
×
×
  • Create New...