Jump to content

Recommended Posts

Click or double click for larger views

C32BB342-9C20-41D1-92D1-48BE9BA9A03A.jpeg

garrett-ace-apex-tone-options.jpg

AAC2B85F-189B-4664-9A0E-BB007EF3F508.jpeg

ID# - Item

89 - Washington Silver Quarter, Clad Quarter
83 - Mercury Silver Dime, Roosevelt Silver Dime, Clad Dime
80 - Copper Lincoln Penny, Barber Dime
76 - Seated Liberty Half Dime, Indian Head Penny
75 - Zinc Lincoln Penny
52 - Nickels

 

  • Like 3
Link to post
Share on other sites

Odd that a Barber dime TID's lower than its silver brethren.  Anyone notice that with other detectors?

I assume these are just guides.  If I were in an area known to have Indian Head pennies there's no way I'm ignoring a 75 hit (1 bin lower) figuring it's a Stinkin' Zincoln.

 

Link to post
Share on other sites
On 8/1/2020 at 11:18 AM, GB_Amateur said:

I assume these are just guides

That's all target id charts ever are.... rough guides. I mainly posted the info so people could see where the tone breaks are on the Apex. Pretty standard stuff. No word yet on if Euro tone breaks with be different but it does not look like it. There is a Coins Mode, and U.S. Coins Mode, but the only difference is the notching, not the tones.

Copper penny on up - High tone

Zinc pennies - Med High tone

Nickels - Medium Tone

garrett-ace-apex-tone-options.jpg
Garrett Ace Apex Tone Options

 

  • Like 1
Link to post
Share on other sites
1 hour ago, GB_Amateur said:

Odd that a Barber dime TID's lower than its silver brethren.  Anyone notice that with other detectors?

I assume these are just guides.  If I were in an area known to have Indian Head pennies there's no way I'm ignoring a 75 hit (1 bin lower) figuring it's a Stinkin' Zincoln.

 

I don't know whose information Garrett is basing their Barber dime readings from. All I know is the Seateds and Barbers I've found have been super thin.........

Jeff

Link to post
Share on other sites

Looks like very similar numbers to the Pro and Max.

Link to post
Share on other sites

I've always thought the Garrett AT series and now Apex  iron volume implementation was odd.  The ferrous tone break should be determined by the discrimination setting and vice versa.  That way you don't get the odd situation where the part of the "fixed" ferrous region above the discrimination setting is a the low tone with iron vol off and then switches to  low medium with iron volume on. Not a biggie but just weird that a non-discriminated region's tone ID changes depending on whether iron volume is off or on.

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Bohemia Miner
      I got my first chance to take the Apex out for a test drive in a local park. I chose U.S. Coins mode because the area I was hunting is home to a Carnival with Rides and Game Booths every year. I must say, it ran fairly quiet until it hit a target. I will most likely use Zero in the future as the “Pre-set” modes may have more discrimination than I’m used to.  Or I could “Accept” some of the blocked-out segments to create a “Custom” Program.
      Overall impressions: Simple, nice and light weight, well balanced, easy to adjust settings plus the Wireless Audio that you can hear your Pin Pointer through!  However, I watched a You Tube video of a hunt at a Boy Scout Camp.  The videographer mentioned that the Depth Gauge seemed to be “off”.  I experienced the same issue.  One target read 4” when it was right under the surface.  This happened more than once.
      My 1.5 hours netted me some Clad coins, a Cinemark Token, a Fleur-de-lis snap or button cover and three strange washers.  I only found one other piece of “junk” which appears to be cast Aluminum.
      Comparing it to the Minelab Equinox Series would be a bit unfair.  While they share similarities like Simultaneous MF, GB, Noise Cancel (Frequency Shift) and Preset Programs including Beach Mode, that’s where it ends.  The Nox has way more Features and Adjustments putting in a completely different league altogether!  The APEX is simply an entry level Multi-Frequency Metal Detector for those starting out or an upgrade for the many Ace Enthusiasts.
      I’ve mostly worked with the White’s TRX which reads off the tip.  It will take some time getting used to the 360 degrees of the Garrett and Nokta Pin Pointers.
      My only real concern other than the Depth issue is what problems, if any, may occur due to them being put together so quickly to fill the many preorders and back orders.







    • By Steve Herschbach
      Hitting a NEW PERMISSION, fields surrounding a Manor House with the Nokta Makro Simplex, Minelab Vanquish and Garrett Apex
       
    • By Keith Southern
      Video of the Apex on Monte's Nail Board Test.

      This is Monte's official Nail Board Test he sent me Years ago.

      I think for the large size of the stock coil and DD its quite Good!!

      Test done with factory tone break.Zero Disc.Multi Freq and some other solo freq's at one point for a comparison.
      Keith
    • By Steve Herschbach
      This is a video that Garrett has done in response to some of the user videos made about the new Apex. It’s possible this was posted before and I missed it... been busy lately!
      “Iron targets can “mask” or change the Target ID of adjacent good treasure targets. Two examples of target masking are presented, along with a demonstration of successfully scanning coins mixed into a row of nails. Although the presence of iron can change a target’s ID, this video shows how easy the Garrett Apex can pick out the treasures in such trashy detecting environments.”
       
    • By abenson
      If you want to see the Apex in the action in the field here is a video I did over the weekend. Didn't compare it to anything in this video just got out and hunted with it.
       
    • By phrunt
      Well, out of interest I thought maybe if the Apex is cheap enough I'll give it a shot, I could always make it the first detector I've ever sold after buying it if I did dislike it.   I don't like missing out on all the action.
      So I contacted Garrett NZ for a price.  https://www.garrettnewzealand.co.nz/  Their response nearly made me fall off my chair.
      We currently have a pre order in with Garrett USA but no confirmation on delivery at this stage, we hope for Christmas time this year but may be first quarter next year, we are only bringing in the apex unit with headphones, the current retail price will be $1029.00.
       
       So you can see a price comparison here are some NZ prices in NZ Dollars.
      Garrett Apex + Headphones: $1029
      Vanquish 540: $659
      Vanquish 540 Pro Pack: $769
      Vanquish 440: $559
      Vanquish 340: $469
      Equinox 600: $1,118
      Simplex+: $548
      Multi Kruzer Package deal: $1198
      Includes 2 search coils, waterproof battery case, hat and Nokta digging tool.
      Simplex+ WHP: $698
      Garrett ACE 400i: $675
      Garrett ACE 300i on sale!: $499
      When you look at price points the Apex is laughable, you'd go the Equinox all day long for a tiny amount more, the dealer would probably match the Apex price on it anyway.   And the Vanquish and Simplex crush the Apex price.
      Similar things happen in Australia with US detector pricing, this is why US detectors are US detectors, price makes them very noncompetitive outside of the USA in some other parts of the world.   Its not just Garrett, it's all US detectors that are priced far higher than their competitors produced in other parts of the world, it would be acceptable if they were world leaders in detecting technology but they're far from it.  A big part of it will be the crazy shipping prices incurred with US products being shipped overseas, I'm not sure why that is, the most expensive country to get something shipped from that's for sure but there has to be more to it than that, taxes or something making them not competitive.

×
×
  • Create New...