Jump to content

Recommended Posts

Getting ready to ramp up......what’s better than a AQ...... hmmmmm ....Two AQ’s

Happy Trails

jimpugh

image.jpeg

  • Like 2
  • Thanks 1
Link to post
Share on other sites

Now that was just plain mean of you Jim 😜

I couldn’t get a Barracuda back in 2000 and now can’t get an AQ in 2020

It’s a good thing that my Excalibur has been so good to me 👍

Enjoy your AQ.......or should that be AQ’s

Tony

  • Thanks 1
Link to post
Share on other sites

So apparently if you get one wet... they multiply? Nice unknown feature!!

  • Haha 3
Link to post
Share on other sites

If there are any others out there who have an AQ and don't think it is their cup of tea, please message me and I will gladly talk about taking it off your hands!

  • Like 2
Link to post
Share on other sites

Jim,

I wonder if the fish below would snap up an AQ......👍

 

00E4C6DD-B7B8-4233-90EB-7436DC81A72C.gif

Link to post
Share on other sites

Some of my early code when the net was young hmmmm Netscape ?

Blast from the past ole Cuda still hungry......yes Netscape you could shred code from anywhere....days of power and free minds....‘I put the code in there in the nineties to have that fire in the Cuda eye that would eat your azzz up...

Thank you Mr. Tony nice time warp

Happy Trails 

jimpugh

 

  • Like 1
Link to post
Share on other sites

Yep....1998-1999.......building a house, getting married, first child on the way. The “Cuda” was definitely circling but if I had cast out some bait and snagged one then my wife to be would have taken an even bigger chunk out of my azzz 😂

  • Haha 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By tvr
      Low water at the local hole today. Low enough that I had wet sand to do some testing with. I can call fish hooks well in the wet sand in all metal ... but not well in the water where I don't have the same ability to change coil speed like over the wet sand. Got lots of lead today, not too many fish hooks other than those attached to rigs with lead or with brass swivels. A couple of deep nickles, one really deep spark plug and one junk child's ring. Was chest deep over a target that sounded really good ... and the battery died. Didn't pack the second one because I had to take care of some other things today, so it was my alarm clock to head home ... and enough of a work out in the shape I'm in. A bit sore this evening, but it is a good sore.
      Cheers,
      tvr
       
    • By cuniagau
      It took me 4 short hunts to finally run the battery down.  Total run time was approximately 11 hours and 35 minutes.  That sure beat the 3 1/2 from the factory battery.  I ran about 95% of the time in AM and only switched to Tone or Mute to check targets. Running mostly presets on the other settings.  The audio of certain targets is starting to become inbedded in my brain now.  Nickels are easy to recognize now.
    • By cjc
      One layer rubberized and an outer layer of "Flex Seal".  First trial in fresh water with just the rubberized seemed to mute the mid-depth interference.  Made the noise easier to tune out--not such sharp reports from waves passing.  Would like to hear back on  some salt trials.
      cjc

    • By GaryC/Oregon Coast
      Sorry for the delay in putting my experiences on paper, I received my AQ 8-7-20.  I have lived in Oregon now for the last three years.  Coming from California I was use to un-ending tourists, vacationers, locals streaming to the beaches all year long.  Here in Oregon I now have to live with the fact that many of my close, local beaches are just not popular with "In the water" type of beach goers.  These beaches do not have the throngs of people lying a towel out and sunning themselves all day long.  Most are lucky to get a few hours of towel sitting and then start looking for a wind break to hide behind.  That being said, if I drive 50 to 250 miles north the populace does have access to a few more popular sunning beaches.
      My first outing was right down to my local beach, three miles away.  Just wanted to see how the AQ acted on my black sand beach and to my water.  I'll have to say it took me awhile to get it calmed down in and near water, even on wet sand.  Ended up with the Frequency at 10.5, ATS at 9, Sensitivity at 6.  This allowed me to run it with some faultsing during my swings.  I just have to slow down my swings and it was more quiet.  
      Second outing was to an inland fresh water reservoir (120 mile round trip) where they have been draining it for only four days.  This is a huge reservoir and takes over a month to drain it down before storms hit.  The beach areas had only about ten yards exposed to the mud bottom and no where near to the end of where people jump off the end of the dock.  The mud was un-digable  with a scoop.  Like working in modeling clay.  I'll have to wait until it gets a little more dried out and use a shovel.  Will try and hit it next month.  Anyway the AQ worked very well in freshwater at the presets.  
      Third outing was to a beach south of me (80 mile round trip).  Actually hit two beaches here same settings were needed to keep the AQ stable while swinging.  These beaches were very clean of trash so I got a good three hours in with the AQ.  I had the exact same experiences other owners reported with hair pins, bottle caps, wire bits, etc.  Like every new owner, especially me, I dug all signals using the All Metal and Tone settings, switching back and forth before digging.  Learning this machine will take me awhile but I like the sound of it.  It reminds me of using my old Mine Lab 4000 gold machine.  Similar in sound and especially reactions to hot rocks.  
      Fourth outing was yesterday, a beach north of me (400 mile round trip).  Actually I hit three beaches but stayed at the first one for a long time.  Nice clean beach.  I usually take my Nox 800 out on it first to test for trash and if it looks good go and get the Impulse.  I got a lot of practice in yesterday.  Digging almost everything and comparing sounds and switching between All Metal and Tone.  I did not take any pictures of my trash or coins or toys found.  Every body has enough pictures of the bad stuff.  I will be staying with my settings for a while as they seem to be good for my beaches.  
      I waited a long time to get this machine and I am not sorry I have it.  You have to realize, and it's been written before.  The AQ will not be for every beach hunter.  It has to be used in conjunction with other machines.  It's not a coin machine and will drive you crazy if you are wanting it for coins.  My trips did not score any jewelry or gold.  Not that I wasn't trying but because (I believe) my beaches are not in use as So. Cal. beaches are throughout the year.  Lower numbers of people on the beach at shorter summer type weather will just not have the abundance of what I was used to finding in California.  You will see a report when I do score gold!!
      Bottom line, I hope the AQ (re-worked model) is a monetary success for Fisher.  I do see however people buying this machine and being very un-happy with it in the short term.  Many new detectorists or seasoned ones either don't have the time to put in on the learning curve or just get frustrated with the limits this water machine has.  Limits being it's not a coin machine (many detectorists will not remember this when purchasing the AQ).  So I predict you will see lots of them for re-sale, maybe six months after the final version has been released.  GaryC/Oregon Coast
    • By Rick Kempf
      Well, here I sit - recovering from some minor surgery - the sitting part made more difficult - no more details available....
      Today I had Fisher ship the 25th AQ LTD. If I had any idea why it is so infernally slow of them to ship the darned things, I probably couldn’t share the details....but the fact that they give me no useful information about such things means that I am spared the decision on what to disclose.
      Mostly folks who have them are learning what they are good for and the consensus is - I think - that like any other detector - they are not good for EVERYTHING. Happily, the consensus also seems to be that they are amazing for a range of interesting and useful things. You can all read about all this elsewhere here.
      For me, I am patiently tending my “waiting list” now about 45 or so. Whether FTP will eventually furnish enough machines to clear the list is not known to me, but I am optimistic.
      I am surprised, pleased and grateful that the majority of folks on my list are unbelievably patient and polite - You all have my thanks. I am VERY happy that I didn’t go in for “pre orders” “pre payments” of “deposits”. Had I done som my life would be a bookkeeping hell (thank you Steve for good advice!).
      When the LTD is done and the “Unlimited” is available, I expect and hope to be one of the dealers for this. In fact, I pretty much feel like I am “all in” for the whole Impulse line.
      The Gold is busily in work. Prototypes will be fielded for test and when the time is right it will be “inshallah” introduced. I have bought a new SDC2300 and a nice used Gold Bug 2 to play with in getting ready for the Gold. In the meantime - I bought myself another AQ LTD and am demanding (for that that is worth) to be early on line for an 8” coil to play with the AQ inland - running its paces against the “trial ponies” - all to educate me for the Gold.
      Meanwhile, I sit here in Gold Canyon - seeing no-one. I have a couple of “strikes against me” and I am a bit of a “health pessimist” and so the slightest hint of the plague would be extremely unwelcome.
      I look forward to next year when we hopefully do more and be more engaged.
       
×
×
  • Create New...