Jump to content

I'm Looking For A New Relic Detector...


Recommended Posts

Hello everyone, I have been out of the hobby for 15 years or so. I have a Minelab XS and was wondering what unit I should buy as an upgrade to this machine.. I mainly search for relics and coins.. Any advice would be greatly appreciated.. Oh, I do some beach searching but very little.. Most of my searching is in the hills of Georgia..

Thank you,

Tim

  • Like 2
Link to comment
Share on other sites


Have a search through the Minelab Equinox forum, I think either the Equinox 600 or 800 would be fine replacement for the Explorer (coming from an ex Explorer SE Pro and Etrac user).  Despite not having both Fe & Conductivity VDI's (only the latter), the Equinox is much lighter, just as capable depth wise, has much better target separation in junky or iron infested areas, and is fully waterproof. 

I think you will be surprised at what the Equinox will find in areas that the Explorer has already "cleaned out", especially those older relic sites. 

  • Like 4
Link to comment
Share on other sites

Hello Tim,

Welcome to the forum! Great to have you here!

  I'm with Goldpick; the Equinox 600 or 800 are great choices! And you can find deals on used ones! Just make sure that they have some of the 3 year warranty left! If you want some of the same benefits of a multi frequency machine, than the Vanquish is a close runner-up, minus the waterproofness! At a lower price point!

   Both great choices for what you hunt! Good luck, and keep us posted!👍👍

  

  • Like 2
Link to comment
Share on other sites

Welcome Tim,

 

The Equinox 800 is a really great unit and it works well in iron infested areas.

There are a lot of people who use it for relic hunting without any problems, because they can use it in wet or dry areas.

Good luck.

  • Like 2
Link to comment
Share on other sites

If you dont need a ID meter,  and want a deep relic hunter, look at the Deeptech Vista X.  It Comes with a 11" coil, optional 5", 6 x 8" , 14" coils.  It sells for around $550.  The Minelab equinox units are good versatile detectors .

  • Like 2
  • Haha 2
Link to comment
Share on other sites

Hi,

If your soil is mild ( not too mineralized ) and you hunt on low to medium iron trashed sites , the ML Vanquish is a very good choice , its perfos are the same as the Equinox . With the V10 coil It is lghter than the Nox and simpler to use. And also cheaper . Even the Vanquish 340 at 200$ is an excellent machine ... Just there is no headphones bluetooth on the 340 and 440, only the 540 has the bluetooth.

Btw the Vanquish audio is similar to the Explorer audio. I had an Explorer XS at the beginning of the 2000s .. 

If you detect on iron trashed sites , then the XPs Deus and Orx are very good choices ..

HH

  • Like 1
Link to comment
Share on other sites

Don't overlook a great resource this Forum provides in the Guides & Detector Database that Steve has compiled. You can access them at the top of page. A lot has changed in the last 15 years in detectors, almost all of it very good. It may take a little study and thought on your needs & wants but it would be hard to make a bad choice in a new detector.

  • Like 3
  • Thanks 1
Link to comment
Share on other sites

We get continual requests about advice on the "best detector" for various purposes. I have therefore created a new tag "best detector" that links all these together for easy review. Click below for a list. It is not relic specific, just any time a person asks about the "best detector for...." question.

 best detector

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Lachie
      I already have a V440, GF 66 and a GM1000. I am getting too old to be digging all day and would rather walk in preference to digging. Thus I prefer sites where it is lesser known so it has not been worked to death. I don't dig beyond 6in and work on the principle that the old timers the old have missed the eluvial and alluvial that was lying just below the surface. Also the fact that not many have hunted there. Anyway that's my rationale for gentlemenly prospecting. After waffled on above what are your thoughts on the best detector that will find gold larger than 1 gm down to 6ins ie not interested in the tiny pieces .Also can find coins etc if possible. I am not interested in 2300,7000 etc as they are well outside my price range. If you have any suggestions I would appreciate it thanks.
    • By NV-OR-ID-CAL-AU
      Hello all,
      My name is Ron and I'm new to the forum and have been learning a lot from it's members and really appreciate all the time everyone puts into this forum, some really great information comes from this forum.
      I'm in the market for an upgrade from my current detectors and am trying to decide on which would be the best detector for the worst case scenario as I have currently been detecting in the Siskiyou's serpentine gold belt (pretty much to hot for VLF's) and this gold belt also contains a very large amount of trash. The Equinox 800, Gold Bug 2, Garrett AT Gold have not been able to handle the mineralization of this ground very well. I have not tried any other VLF’s here though.
      I usually rely on my Minelab Pulse Induction unit in this ground and use the iron disc. to save probably 75% of my time from digging unnecessary holes. I'm still interested in owing a top of the line VLF due to I detect mine dumps in the backcountry of Idaho, Nevada, and eastern Oregon where the trash is less abundant and the ground is not so mineralized even though it is usually steep and rugged (great VLF areas). 
      After reading several posts on this forum I have narrowed my research of VLF metal detectors to the Equinox 800, Gold Monster, X-tera 705 Gold Pack, Nokta/Makro Gold Kruzer or AU Gold Finder, White's 24K or MXT, or a second back-up Gold Bug 2. I am really looking for the machine that can handle the hottest ground and has the sharpest sound on small and deep gold. Although no detector is a do it all machine I'm hoping the one that can handle the hot ground the best should be able to excel with better iron/disc. and target separation regardless of it being a multi-purpose detector or gold only detector, my assumption only. Does the frequency of detectors change their ability to handle hot ground like Australia. Has anyone tried these detectors in highly minenalized ground with any good results?
      For Pulse Induction I'm narrowing my research to the GPX 6000 and/or GPZ 7000 both non disc. units for a great option for Idaho, eastern Oregon, and Nevada were there is less lead and iron trash present. For these Siskiyou's trash sites I'm looking at the GP/GPX series with iron/disc. Garrett ATX, Fisher Impulse Gold (has anyone been able to separate out lead and iron trash with the Fisher limited AQ  Impulse version and still find small and deep gold)? Has anyone got a good grasp on these machines being affective  in iron and lead infested areas?
      Thank You for your time.
      Ron
    • By Tony66
      I'm starting up detecting again so I'm looking for opinions on a new machine. Money is an issue, but I know a descent machine will cost a little bit. So far I'm leaning towards a Fisher F22 or one of the Garret models. By all means, give me opinions on not just those mentioned, but any that would be good for someone not too far above beginner (have to learn everything again).
    • By Joe D.
      Hello all,
         I recently saw someone state that they didn't fully understand why they sometimes get the urge to buy a certain detector! And for one reason or another, fail to pull the trigger, or asking the question of why not!
         I, like many here, have questioned why i would want to purchase; and have purchased, what would "technically" be an "inferior" detector! If there is such a thing; they all find stuff!!
         I think the reason's are as numerous as one can imagine! So i won't bore everyone with what i think their reasons are! I can only speak for myself!
         Probably my number one driving factor are places like this forum, and other sources for research! Once you really start to get the "bug" for detecting, you begin to understand that it can go beyond just finding treasures! In fact, my reading, and quest for information, far exceeds my actual detecting hours! Of course, there are also "real life" reasons that prevent me from getting out there as often as i would like! But instead of that being a negative; and me being bitter about it! I funnel that energy into trying to soak up more knowledge to make my actual detecting hours more productive! Many here will understand this!
         So, for those thay are unclear what that has to do with buying older, or less advanced detectors, i will explain!
         Like many, i detected a few years when i was young! Stopped for a career, and family; among other reasons! And got back to it, a few years before my retirement five years ago! Not being involved for all those years, i went with a new detector; among others i researched at the time!
         Now fast forward to today! I'm much more knowledgeable than seven years ago; detecting and theory wise, but have barely scratched the surface! I own several detectors for various functions! Some overlapping each other a bit in operation! A few others are just for fun, or for something i feel i missed, in my absent years! Other's were too good a deal to pass up! And I could get a good return for, if i chose to!
         So, to summarize! In my opinion, the longer your in it, the wider range of technology, legends, varations, etc... you are likely to buy, and try, for no very practical reason! Cost not withstanding; as you advance in this hobby! Or as some jokingly refer to it as a "sickness ", or "obsession "! 🤩 👍👍
    • By GoldenHillbilly
      I'm looking to buy my first detector this year, specifically for nugget hunting. After lots of research I'm leaning towards the SDC 2300, but wanted to see if you have other suggestions based on my terrain/conditions. We don't have much public land for detecting because the national forests and state parks don't allow it. But I have access to a private 10 acre property with a creek flowing through it. There was allegedly an old gold mine that was buried decades ago in a neighbouring property, so hopefully it is a good place to work. The ground is covered in lots of organic matter sitting on top of soil heavy in granite and red clay. The creek contains a wide variety of minerals specimens and a good amount of magnetite. So it looks like I'll need to focus on PI machines. Here are my main questions.
      Will my time be better spent in the creek where the gravels and rocks are exposed, or should I also focus efforts in the higher areas covered in humus?
      Should I wait for the Fisher Impulse Gold to come out (and prove itself with users) before dropping a few grand on older technology?
      Does anyone recommend the Garret ATX or any other detector over the SDC 2300 for the area and conditions I'm dealing with?
    • By JesseAllen2
      Hello everyone!
      My name is Jesse, and I dig trash on the beaches of Santa Cruz, California with my White's TDI BeachHunter. Tent Stakes, Bottle caps, clad, you name it. Occasional gold (around an ounce in the last year), but wayyyyy too much garbage for the time spent out there. No, more like the right amount of garbage dug on a trashy beach with a PI with no discrimination settings LOL.
      I love this machine. It's stable, reliable, punches very deep, and was a great first "real" detector. The  weight sucks (though it can be hip mounted, but I found myself getting tangled in the wired in that configuration), and the shaft sucks too.
      I have saved some money, and am planning to shoot for the moon. I want the best beach detector out there, VLF, PI, or otherwise, that will help me dig 99% less garbage, and still punch deep and be fun to swing.
      So far, considering a CTX 3030 or Equinox 800. Big coil for either.
      Reading the forum for a few months, following developments, it seems that the metal detector market moves about as slowly as the "games in development" market. I may be outing myself as a Zoomer here but waiting for these new machines really brings me back to waiting for games to go from beta to 1.0. Anyways I'll be in possession of my next detector for the foreseeable future, and am having a hard time deciding what choice to make.
      Do I get the 9 year old, 50 lb dinosaur with *slightly better VDI depth on higher conductors that costs almost double what a proper Nox setup would cost (with accessories), or do I get the Nox? Which feels just past its prime, with direct replacements probably coming out soon?
      Do I wait for these detectors that exist only in the imagination? The new fisher PI, possible CTX replacement?
      I have a nice pile of coin after selling some finds and other detectors and would really like to make this purchase count, any input is appreciated!:)
      -TENT SPIKE DIGGER
×
×
  • Create New...