Jump to content

GMX Iron Discrimination Wrap Around Feature


Recommended Posts

I watched the youtube video of the guy from whites demonstrating the iron discrimination ability to wrap around to the 99 range by pressing the lock button while in discrimination mode. However, on my gmx it keeps only adjusting the ground balance offset, which is what happens normally when you press and hold the lock button. Any thoughts on what I am doing wrong? Id love to knockout 99 numbers. Nate

Link to post
Share on other sites

It was probably me in the video. I think I remember this control requiring the following steps:

1. Hold the DISC button for about 3 seconds to enter disc edit mode

2. Tap the LOCK button to engage the wraparound feature

3. Hit the pinpoint button to exit the disc edit mode

  • Like 3
Link to post
Share on other sites
7 hours ago, tboykin said:

It was probably me in the video. I think I remember this control requiring the following steps:

1. Hold the DISC button for about 3 seconds to enter disc edit mode

2. Tap the LOCK button to engage the wraparound feature

3. Hit the pinpoint button to exit the disc edit mode

Thanks brother! I am heading up to do some detecting tomorrow and I will follow these steps. Ill update hopefully with some gold pics. Side note: checking out a creek I was tipped off on by an old timer I met on the river. Apparently he has over 8000 pieces of gold, over 100 ounces, 35 years, I was like "thats it!?". Glad I asked if he had any tips and he pointed me towards a spot he does pretty well, we'll see. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Dances With Doves
      With all the money Minelab made in  Africa it seems they should give this machine a good look since it is a very good machine for gold.I would like to see them bring out some epoxy filled  coils too in a lot of different sizes. A  9 by 12  concentric first  for water hunters or 8 by 11 dd .

    • By Theraker
      False signals every time the coil touches anything.   Twigs above the coil touch the wire that plugs into my coil and it gives a false signal.  If my coil touches the ground while I sweep I get pounded with false signals.  I’ve cleaned the coil, lowered sensitivity, raised and lowered Vsat, locked ground balance and manually grabbed ground, discriminated.  I’ve tried new frequencies, factory default, but it won’t stop.  Any bump gives a signal.  Any suggestions? My first nugget is so close I can smell it!  Here are my last finds after 3 or 4 hours but had to stop due to the chatter from my detector. 

    • By Dances With Doves
      When I use my Gmx with the 6' concentric  coil in a beach section with a high  concentration of black sand it is overloading all the time and I have to raise coil about an inch   to have it go away.I then go  for the nice zip sound and I usually get a coin because all the light stuff has been swept away. This 48kz  machine is very  hot with this coil.Would a bigger  DD coil stop this overloading?
    • By Bohemia Miner
      Has any one tested the Makro Gold Kruzer against one or the other of the White's detectors listed in the topic?
      Thanks!
      Walt


       

       
    • By Dances With Doves
      The last time I took it to the  beach I found only 1 penny  while my  friends found about 3.50 each plus 1 had a silver ring.It would not be hard to beat this total so off to a thin but  very junky beach   we went(different beach then other time).There were bottle caps   galore and junk from the many fires this beach has at night plus what is dropped during the day.There was a good cut along the shore and I dug the  nice zip sounds in this black sand section and got about 10 coins and 5 were    nickels  plus a junk iron ring.In  5 sens. setting the black sand would over load without there even being a   target sometimes  . It was that hot in this section.I then hunted in the tan sand and got a clean gold color chain that was iron.Toward the end of the hunt I got a  nice tight zip and out came a moon 10k hoop earring at 1.6 grams.It is the first gold me and my friends have found on the dry sand with    over 100 hours between us in hunting time.The GMX redeems it  self on the beach and gives me 10 gold to be in the double digit gold club with OBN  but  still way behind him.I took it in a pond like area by a creek mouth and the machine did not act any different which is good.I might take it in the water next. I will try to get a  picture tomorrow. I have to learn how to do it. 
    • By havingstl
      I am going to write a little bit about my outings with the GMX.  It will be fun and maybe I will be able to harvest some advice from more experienced detector/prospectors.  I did go to a creek/swimming hole but had very little time with the detector. I have a very young family and it can be hard to concentrate when 1 of my 4 kids is getting hurt or stuck or ....  so I gave up on it pretty quickly that day.
      I was able to get out to the Lynx Creek withdrawal area with a friend.  He's new as well and using a Time Ranger Pro.  I looked on Google Earth and picked out a wash that ran parallel with the main creek.  That way we would be able to detect in and out on our hike.  Unfortunately,  the borders of the withdrawal area are not marked well on the maps I found available but the private claim the wash was on is marked really well once you get out there.  We hiked along the fence for a while looking for area that might be interesting to detect.  The only spot I found was a large hole.  The material excavated was a different color than the surrounding soil so I dug a few iron targets from the pile.  It doesn't seem like anyone has thoroughly gone through all that material with a detector and there are many hot rocks and pieces of iron mixed in with the material.  Eventually, we hiked down to the main creek bed.  My partner moved quite a bit faster than me and found many tin cans along the way.  I tried to be as meticulous as I could whenever we found a wash to detect and found only one large can.  I think I will bring him on my future trips and send him in front of me to remove large trash items.  We detected up the mostly dry creek bed and dug trash target after trash target.  I heard it was trashy here but I had no idea it would be this bad.  The area had many hot rocks which would send my detector into overload if touched.  I ended up needing to set the detector down to level 3 sensitivity just to get around  without overloading constantly.  All in all it was a fun outing with some rugged hiking and a near heart attack when a deer jumped up about 5 feet in front of me.  I was using the 6inch concentric coil but would like to take the 4x6 double d out here and see if it is able to handle the hot rocks any better. 
      Outing 3 was to the same area but I wanted to try the mineralization tracking feature of the detector.  Lynx creek is more known for gold panning so I thought I might have better success that way.  I swung it around and everything in the area is really mineralized.  I was able to find a couple spots with a bit of an increase on the meter and it was really did seem like there was quite a bit more black sand in the areas the detector was interested in.  I panned for a while in these areas but found no gold.  After a while I wanted to try detecting up the hillside in front of me.  It was pretty steep and, I thought, difficult enough to deter some prospectors.  When I got up there it was definitely steep and full of loose rocks.  I was only able to detect a small portion of the hillside but I found plenty bullets.  Many of the loose rocks were quite hot.  At this point I was getting better at listening to the detector and figuring out which sounds are hot rocks but it was still pretty challenging on this hillside  I was worried about pushing one of the rocks out of the way and killing one of my kids who might have wandered underneath me.  After a short time of this I could tell that my families patience had run out and we probably needed to head home, still gold-less 
      Unfortunately, there is a new issue in this area.  The management of the forest forgot to renew the mineral withdrawal and now large areas are now private claims.  The area i had originally planned on going the 3rd outing was all claimed up with fresh signs everywhere.  I can only assume fences will follow.  In the end I don't know if Lynx Creek is a good area to detect.  If I come out here again I will bring my TDI and see if that makes the hot rocks anymore bearable.  I am digging all the targets anyway so I don't know if the discrimination afforded by the GMX is helping.  I will try and head out again soon.  Hopefully the temps here in AZ will go down soon and I can get into more of the GPAA claims in the area.

×
×
  • Create New...