Jump to content

Recommended Posts

Hello everyone,

This past July I had my roof redone. I decided to research metal detectors to find the nails that inevitably get strewn about after such a job. I decided on a Garrett Ace 400, as it seemed to give the most bang for the buck at a mid-level. My wife and I both agree that one should never buy the least expensive tool to do a job, but not always the most expensive , as it would be a lot of money sitting on a shelf. I only found about 70 nails, a testament to the people that did the job! While I was doing this search I also came upon many videos about metal detecting, and it opened my eyes to the possibilities that I could entertain in my area. I live in a very rural part of one of Virginia's northern peninsulas. As it happens it is a very old county, one of the first established. In addition the War of 1812 happened a bit here as well, particularly in my backyard. I knew I was going to be hooked, as I am also sort of a history buff.

I set up sort of a "grid" system in my backyard using 6 6' blaze orange driveway markers from Lowe's, 3 on each side of the yard spaced 6 feet apart. I use 3 on each end so I can jump one one every pass, so that I always can line up between 2 of them. I use the 6 foot fiberglass rods because they are about the width of a full swing side to side, and all I have to do is lay one down to know where to put it next. Seemed like the best way to "grid" search my yard.

At first I dug up a lot of Iron whatzits, but as I got used to the detector, I started turning up coat and sleeve buttons that are about 200+ years old. I found some musket balls, Shot, and even a WW1 army jacket button. Didn't find any coins until I got to the house, and all were new. Of course I found my share of aluminum, mostly beer and soda cans from the construction of the house. I was starting to get stuff like all the people in the videos, so I was hooked.

Luckily for me there is much more to explore, all of the land in front of my house has always been farm, and was bought from the developer by a farmer due to the housing crash of 2007. I asked for permission to detect the farm two weeks ago when the farmer came to collect the crop, and he said "have at it"! He also directed me to 200 acres more he owns down the road. 

Thus far I have searched about an acre of the 300+ acres I now have permission to. I have found many more buttons, all colonial, copper and Tombac and gilt. I have found three coins, one 1809 half penny, an 1879 Indian head in almost perfect shape, and what I think may be a King George copper that is in "field shape", no identifying marks but rings when dropped on a table. I also have found a sun-face pendant with sparkly stones for eyes, and a lot of horse tack and colonial buckles, some spurs, and other odd stuff.

I also have an 1800s Steamboat landing close by, map locations of a few colonial houses, and an old Baptist Baptism site. The oldest maps I can find so far are from 1917, so I'm working off of them to find the houses. I have already located one that was pushed into the woods on one part of the farm.

Needless to say I guess, I have a lot of work to do! I retired in October, and because some of my search areas are water or river, I bought a Minelab Equinox 600 and waders, because most of my search would have to be in the cold months. I am hoping the Equinox will be a step up, but in going over where I searched with the Ace 400, I didn't find much more. I like the 400's "baseball bat" approach on land. I also downloaded an app called Tect O Trac which is very useful for geolocating my finds, keeping records, and showing patterns of finds.

Looking forward to interacting with y'all! sorry for the tl;dr. 

 

 

 

  • Like 7
Link to post
Share on other sites

Welcome to the forum.  Yep you are hooked and acquiring the Equinox 600 was a good move.  It will take you to the next level with its ability to hunt in both multi and single frequency.  Check out the Equinox forum here, especially Steve H.'s compilation Equinox Essential information post below.  I live just up the road in northern VA just outside the DC beltway and have done a lot of CW relic hunting in the central and northern part of the state and was interested in exploring the peninsulas for the reason's you cited.  I highly recommend Andy Sabisch's Equinox Handbook as a great resource and you can read about my personally recommended Equinox relic settings in that book on pp. 87 -88.  Just post in the Equinox forum if you have further questions.  PM me if you would like to meet up relic hunting or for some in person Equinox instruction down your way some time.  I'm always up for a good metal detecting day trip. 

Tect O Trac is a good, inexpensive program but it does have some limitations.  One program that I have found to be very useful with similar capabilities and more is OnX Hunt to which I upgraded from Tect o Trac.  It is a more expensive subscription-based program (depending on how much information you want available) but it gives you property lines, public/state/local/federal property boundaries and registered property owner information as well as tracking, finds markers, and the ability to save photos of your finds as well as a host of other "information layer overlays" including weather.  

GL HH.

 

  • Like 2
Link to post
Share on other sites

Mr. Goldman,

Thanks for the info! Just ordered the Equinox Handbook. Wish there was a link I could have found here to give Mr. Herschbach a cut of the Amazon purchase. Looked at OnX Hunt, it might be good for the future when I am used to "fixed income". Right now I am well aware of the property lines here - the landowners are pretty stodgy, and some live out of state. I use land records often! It's also Hunting season, so it is quite dangerous to be where I am detecting. Luckily I know a few members of the local hunt club, they have been polite so far asking me if they are getting in MY way. It's ironically the opposite of what I hear from others. I will seriously consider your kind offer. It would be a valuable exchange. Just make sure you have some Blaze Orange and leave the antlers at home!

The reason I was attracted to this forum over others is the knowledgable discussions and polite members. I have read some of Steve's reference material already. I hope I will eventually be an asset rather than a "seeker". I consider myself fortunate already to have a "target-rich environment" at my disposal, not one day has passed that I found nothing. The soil is so good you can almost run your detector wide open.

 

 

 

 

  • Like 2
Link to post
Share on other sites

Welcome. It sounds like you have found the perfect hobby given your interests & situation, I suspect it won't  take long for it to become a passion. Enjoy!

  • Like 1
Link to post
Share on other sites

Welcome to the forum. You're pretty lucky to have all that land to pick at. Should keep you busy for many years. Your skills will get better especially as you hit familiar grounds and learn the machines.

  • Like 1
Link to post
Share on other sites

Thanks everyone. I'm used to "pics or it didn't happen", forgive my omission in my post. Here are two photos of what I have found so far, forgot to mention the cut Spanish silver 2 Real pieces I found the first day out in the field.

20201220_230212.jpg

20201220_230235.jpg

  • Like 5
Link to post
Share on other sites

Great hunting and lots of good finds with your detecting skills as a newbie.

Wish you luck in the coming weeks and months ahead learning the 600 as it is a very good unit.

Good luck and keep us updated as you are in a great area for some nice finds.

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By lures63
      Gidday Guys 
      Gary from Townsville Aust , not the most serious dirt fisherman but super serious water fisherman 🙂 , I have a equinox 800 and xterra 705 so play in the dirt abit.
      Also do a fishing show on radio you can tune in on Saturday mornings 7am Aussie time on 4k1g/listen live.
      NQFISHINGSHOW on instagram or FB
      Looking forward to joining you all for some info and help
      Cheers Gary

    • By ChuckScrivener
      I’m a photographer/writer/artist out of Northern California. I have been metal detecting for about 20 years. Mostly gold nuggets. Just getting into relics and coins with my newly purchased Equinox 800. Felt it was time to join the site since I’ve been enjoying the members and knowledge shared for months. This whole Equinox thing is new to me as all I’ve ever detected with are the GPX Pulse Induction machines. I hope to learn and share the hard knock knowledge I am sure to receive from trying out a new form of detecting. Thanks for having me as a detectorprospector member and thanks for all the knowledge and inspiration I have already gained from everyone here. 
    • By Cootiewap
      Back at it after 20 yrs . Got me an AT PRO and Equinox 600 . My how things have changed ! Both of them are great 👍  went wireless on the Nox , thinking of doing the same on the Garrett. Gone to some of the old haunts and been killing it . Amazing how much stuff I missed with the older machines! I tend to favor the Nox . Only thing I'm having an issue with is finding pinpoint sweet spot .
    • By Scarfoot
      Hello all,
       
          I've been lurking for a while and I've enjoyed all the equipment reviews and inside info. so I figured I would join in the conversation. I've been metal detecting for 16yrs with a focus on civil war relics and, pre civil war coins. 
       
    • By pdunc
      New to this forum and have already found a lot of useful information.  A bit about myself. I’m 68 and have been detecting since 1986 off and on. Mostly on, but off the last two years. I’ve had a few higher end White’s in the past, but for the last I don’t know how many years, detected in the water with a Fisher CZ-20 and then a CZ-21. Decided to get out of detecting about 2 years ago and sold all my equipment. Felt naked without a detector, so I ordered an Equinox 600 and a Garrett pin pointer which should arrive tomorrow. Also ordered a Sito scoop. All the ground here in Maine is currently frozen and covered with snow, but I should be able to hit some non frozen ground at the coast soon to try and learn this detector. Not planning on getting out to detect as often as I have in the past as age and a sore back seem to be catching up with me. In any case, I look forward to future conversations and sharing information with you all.
    • By EWCoinhunter
      Look forward to meeting and sniffing dirt with others that love this great hobby or ours.
×
×
  • Create New...