Jump to content

New Coiltek Coils For Equinox - Focus On 5x10 For Gold


Recommended Posts


  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

The main thread on all three coils is on the Equinox Forum. 5"x10", 9"x14", and 15" round Coiltek Coils for Minelab Equinox I've been pounding the drum for three years for a 6x10 or 5x10 co

I sincerely hope the new 10x5 coil has similar sensitivity to small gold as the standard 6”, one of the things I love about the 6” is the more refined iron ID information compared to the stocker. In q

UPDATE & EDITED to New LOWER Pricing. As a longtime dealer and user/fan of CoilTek, I feel the a couple of these coils have some serious desires of use and I can see 2 of them being quite pop

Posted Images

9 hours ago, Skookum said:

Still eager to hear what Minelab permitting their logo on an aftermarket coil means.

So it's not just me. Yeah, use of the official logo is a big deal legally, and does tell us something about the relationship between Minelab and Coiltek at this point in time.

coiltek-5-x-10-searchcoil-minelab-equinox.jpg

  • Like 4
Link to post
Share on other sites

My thought is COV19 disruption (supply and manufacture) across the globe and well established coil in the after market experience available in Australia. 

  • Like 1
Link to post
Share on other sites
On 2/6/2021 at 9:00 AM, afreakofnature said:

Out of curiosity did you alter the FE or FE2 settings?

I did, but ended up back at the stock setting due to FOMG (fear of missing gold). 

Link to post
Share on other sites
On 2/6/2021 at 7:52 PM, rvpopeye said:

An "endorsement" , maybe just an "approval"  points(cut) possible ?  

I think that is it.  These coils are approved by Minelab, maybe that's why they have the Minelab logo.

 

Link to post
Share on other sites

Thanks for posting the video Swegin.  Hopefully my website guy has it on my site tomorrow.  Of all 3 coils, I too.. feel the 10" ellip is going to be the best seller for most of my people.  Heck I even sent a 2nd order...all 10" Ellips., as I already have the other 2 on my original order to Coiltek.  The 10" Ellip is ideal for Prospecting nuggets on a VLF and I also like it for semi trashy sites when detecting old Coins/Relics.

Hopefully I'll have some of these coils soon as I'm getting prepared for our Field Training coming up in Nevada.  Boy would it be nice to be swinging, testing, selling the new GPX-6000's and the NOX coils.  If I have some to take, I might even head down a few days early just to put some time on them.

  • Like 5
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Gerry in Idaho
      My good friend Larry S was proud to share some recent success using his Equinox 800 and the new 10" Ellip NOX coil.

      Notice how small the one just in front of the CoilTek, pretty amazing.

      Nice to see some of what other people find as some folks think me being a dealer, it's setup.  Those who know me, realize it's real and I would never take credit from a customers success anyway.

      If you want to learn more about the benefits of the new NOX 10" Ellip 10x5" coil, watch this video:
      Time to get out there and get you some.
      Thanks again Larry for sharing your Success.
    • By aerospace guy
      I keep checking for anyones results with the 10X5 looking for gold & so far have seen hardly anything! Hoping a dealer or other reviewer would have had time to use the coil for gold prospecting and again, had time to do a write up. I have had success with the 6 " DD on the EQ 800 and am wondering how the Coiltek compares?
    • By GB_Amateur
      Apparently these kinds of interviews have been occurring for a couple months with various detector experts (and dealers) around the world.  Except for a post buried in a thread (credit to Dances with Doves for calling my attention to these), which I didn't figure would reach the full audience, I think this is the first post of these four episodes with Gerry which were uploaded to YouTube on the 18th & 19th of April.  Basically each of the first three episodes covers the one of the new coils separately and sequentially:  5"x10" (~19 minutes), 9"x14" (~22 minutes), 15" round (~44 minutes) and a wrapup segment (~11 minutes).  I'm posting just the first one as each successive one is linked by Trevor at the end of the previous.  E.g. to see part 2 (9"x14" discussion) just move the video's scroll cursor to the end of part 1.  I watched episodes 1,2, and 4 in their entirety and the first 15 minutes of episode 3.  A lot of the general info is second nature to seasoned detectorists.  But there were a couple tidbits and I like being reminded now and then of the basic principles.
       
    • By Rick N. MI
      I am impressed with it. It will my main coil this summer lake hunting.
      I like the razors edge tone when detecting. It is fast as it goes over targets. Depth is very impressive in my mild ground.
      I hate to say but my Anfibio Multi is the backup detector to my Equinox 800. Even with the 5x10 coil.
      I look forward to seeing what Minelab has coming.
    • By Gerry in Idaho
      Just wanted to update those still looking for the new NOX 15" round coil by Coiltek.
      I just received a shipment of coils and have them in stock ready to ship.
      My 1st hunt with the 15" round was quite silverish with an 8 silver day.
      Nothing extremely deep (Idaho soils) but most coins were in the 8 to 9" range.  I was able to lift the coil a couple inches off the ground and still get a repeatable signal.
      No it is not leaps of 6" inches on a coin size target, but I would think a buckle or cannon ball would be approx 6" deeper.
      Call Gerry's Detectors at 208-345-8898 to get one on its way to you.



    • By Steve Herschbach
      IMPORTANT UPDATE - Coiltek NOX COILS

      Since we launched the new NOX coils just 4 weeks ago on the 3rd of March 2021, we have received 1000’s of orders for the product, and these orders are continuing to grow each day.  We have never before experience such demand for a Coiltek product.

       We are naturally delighted to have such a positive response to the NOX product and we are grateful for your support. However, due to this unprecedented worldwide demand and the various impacts of COVID-19, deliveries are taking longer than usual.

      Be assured, our worldwide distributors and dealers are doing the best they can and we are keeping in close contact with them. They are being updated regularly on availability and stock quantities.
       
       We at Coiltek have a great production team and we are working around the clock to supply. Our commitment to quality and providing you with the best product possible is and will continue to be at the forefront. 

      Current delays can be up to 6-8 weeks. The best way to purchase a NOX coil is to contact your local Coiltek dealer and place an order.
      Again, thank you for your support and patience, we sincerely apologise for these delays.
      New Coil For Minelab Equinox from Coiltek

×
×
  • Create New...