Jump to content

Dealer Sale Minelab Gpx-6000 Now Taking Pre Orders


Recommended Posts


As a member of Gerry's Field Staff Experts, I am proud to provide in-the-field gold detector training for Gerry's customers, as well as for folks that bought their gold detector elsewhere and would like to experience the very best training that the industry has to offer. Call Gerry at (208) 345-8898 for details and scheduling, and I hope to serve you in the gold fields soon!

  • Like 7
Link to post
Share on other sites
4 hours ago, afreakofnature said:

They are the best!

You have done well since your training Grasshopper.  Looking forward to seeing more of your golden adventures.

  • Thanks 1
Link to post
Share on other sites

Summer 2020 brought the fever back and after meeting a local who had good success I was scouting for the best little gold finder I could get my hands on that's when I found Gerry and pulled the trigger on my monster.

A few weeks later I decided I needed to get a sdc while I waited on a gpz from Russia (another story there) and after discussions with a couple of great sellers I settled on a new sdc from Gerry's and training @ Rye patch.  The training and accompanying sharing of experience and knowledge from Gerry and his great down-to-earth staff was the basis of an incredible experience that myself and my brother won't soon forget (our first detected gold @ several little pickers).

Alas, I had just sold the sdc in the past few days to snag one of the under $7000 gpz 7000 deals that were on ebay only to find I was just a little slow to the draw......my once in a while story :)

I recommend talking to Gerry even if your not buying a detector as he will shoot it to you straight as he sees it.

 

Gerry, if you read this and have another of those eBay 7k packages come available I am a looking!

  • Thanks 1
Link to post
Share on other sites
7 hours ago, spencer@wy said:

Summer 2020 brought the fever back and after meeting a local who had good success I was scouting for the best little gold finder I could get my hands on that's when I found Gerry and pulled the trigger on my monster.

A few weeks later I decided I needed to get a sdc while I waited on a gpz from Russia (another story there) and after discussions with a couple of great sellers I settled on a new sdc from Gerry's and training @ Rye patch.  The training and accompanying sharing of experience and knowledge from Gerry and his great down-to-earth staff was the basis of an incredible experience that myself and my brother won't soon forget (our first detected gold @ several little pickers).

Alas, I had just sold the sdc in the past few days to snag one of the under $7000 gpz 7000 deals that were on ebay only to find I was just a little slow to the draw......my once in a while story 🙂

I recommend talking to Gerry even if your not buying a detector as he will shoot it to you straight as he sees it.

 

Gerry, if you read this and have another of those eBay 7k packages come available I am a looking!

I'll have one with both coils tomorrow.  Email me direct at gerrys1det@cableone.net and thanks for the kind words.

  • Like 1
Link to post
Share on other sites
On 2/20/2021 at 11:58 AM, Gerry in Idaho said:

I'll have one with both coils tomorrow.  Email me direct at gerrys1det@cableone.net and thanks for the kind words.

Hi Gerry

so what price are we looking at then??

Link to post
Share on other sites
14 hours ago, Bhogg said:

Hi Gerry

so what price are we looking at then??

I'm in the United Stated, so shipping would be a bear of a charge.

Depending if someone wants both coils or just 1, training or no training.

$5999 and up.

  • Like 1
Link to post
Share on other sites
  • Similar Content

    • By Jim McCulloch
      I am closing out the last of my gold Master GMT and 24K coils and coil covers. All of these are absolutely brand new, never mounted on a rod. Each coil comes with a brand new coil cover. All prices are postpaid. GMT Sierra Gold Max $120. Two are available. GMT 10 x 6 standard Double D coil $120. One available . 24K 14 x 8 coil, $200. Two are available. Individual coil covers 10 x 6 oval GMT $11. The Flat 6 in round coil for the 24K and GMX $11. The 6 by 4 shooter oval coil $10. I have several of each of the ladder coils you can contact me at 760 401-7514.
    • By Gerry in Idaho
      As a dealer, I have taken many detectors in trade and with the new GPX-6000 coming soon, I'll probably be taking more gold detectors in trade from my 25 yrs of customers.  Here are some parts I figured is time to start clear up.  I have a variety of Upper and or S rods for different models of detectors.  Many folks use S rods for better ergonomics.  Some folks have worn out there old rod and need a new one.  Others just might want an extra one to look good when they trade their detector?
      I'm asking $35 shipped no tax for 1, $60 shipped no tax for 2, $85 shipped no tax for 3, $100 shipped for 4, or $120 for 5, or $150 shipped for all.

       
      Anyone looking for the black metal upper straight shaft for Minelab GP/GPX, I have some.    Also have non metal lower shafts of a variety lengths for the GP/GPX.
      Even have a few non metal carbon fiber upper shafts for GP/GPX (those were my favorite) as they are lighter and no metal.
      Have a few swing arms in the stash as well.
       
    • By Gerry in Idaho
      DETacc Super Sound Signal Enhancer.

      Left one fits all SD-2100 and 2200 series, GP-Extreme, GP-3000, GP-3500 series. It will work on GPX models, but you need to purchase the adapter plugs for the 4000 and 4500. Easy to use and operate with only one knob, used for Volume Control. Retailed for $175 and you get it for $55 shipped.
      Right one will go to the newer GPX series, including the GPX-4000, GPX-4800, GPX-5000.  It's the 5 pin were as the older version SD/GP is the 4 Pin.  I want $65 shipped.
      I'm very well known on DP.  Call Gerry at www.gerrysdetectors.com

    • By steveg
      Greetings!

      This complete, high-quality, lightweight shaft system for the Equinox consists of:

      1). A 35 1/2" long carbon-fiber upper shaft, with four cuff adjustment holes, and one hole for the control-box handle (located in the same positions as on the Minelab upper shaft section). This upper shaft replaces -- as a one-piece section -- both the middle and upper sections of the stock Minelab shaft;

      2). A 26" long carbon-fiber lower rod, including spring-button clip (the same lower rods I've been selling for several months).

      The following pricing applies to several basic shaft options...

      1. Upper shaft section ONLY (no lower rod), regular end cap … $79 plus shipping

      2. Upper shaft section ONLY (no lower rod), threaded butt-end and threaded end cap (to allow compatibility with the threaded counterweight system) ... $89 plus shipping

      3. COMPLETE shaft system (upper shaft section PLUS 26" lower rod), regular end cap ... $129 plus shipping

      4. COMPLETE shaft system (upper shaft section PLUS 26" lower rod), threaded butt-end and threaded end cap (to allow compatibiility with the threaded counterweight system) ... $139 plus shipping.


      All of the above shafts can be customized in various ways, per customer preference (rod length, hole locations, etc.) Optional spring button holes (to facilitate use of the lower rod spring button) can also be included in any of the upper shaft options above, for an additional $10 (the button holes are not REQUIRED, on my shaft, due to the strong/secure clamping cam lock system that is used with these shafts, but are available as an optional inclusion).

      As alluded to above, an optional counterweighting system is also available for these shafts, to alleviate the "nose-heaviness" many Equinox users have noticed. The counterweight -- short-lengths of carbon-fiber tube, filled with small bags of lead pellets, and which screw into a threaded insert in the butt-end of the shaft -- can either be packaged with a shaft system, or purchased separately later, as an add-on accessory. The tubes are custom-built to each user's desired weight/length, and additionally, the weight of the tube can be adjusted at any time, via access to the internal weighting through a threaded end cap.

      Empty counterweight tubes (with the customer supplying the weighting) ... $35 plus shipping

      Weighted counterweight tubes (built to customer specification) ... $45 plus shipping

      Finally, I have created several documents to provide more detailed information regarding the shaft system itself, including counterweighting and how to choose the right weight for your situation, the "button holes vs. no button holes" decision, etc. I can provide these documents to anyone who requests them, and I am of course more than happy to answer any questions you may have -- either here, or via my email address, at steve@stevesdetectorrods.com.

      After an extended period of working to design a superior shaft system, and extensive field testing, I believe that my goal for this complete shaft system has been achieved -- with these shafts providing a high-quality, wobble-free, ergonomically balanced, aesthetically enhanced upgrade to your Minelab Equinox!

      Thanks!

      Steve
      https://www.stevesdetectorrods.com
      https://www.facebook.com/stevesdetectorrods



       

    • By kac
      Finally got my patent for the digger, just made a new batch. PM me if you have any questions.
      https://www.ebay.com/itm/233812638842
      Thanks,
      Ken
       
    • By steveg
      Hi all!

      I would like to remind those of you in the market for a high-quality, heavy duty carbon-fiber sand scoop handle that I'm now branching out with my company into producing these handles.  While they are not up on my webpage as of yet, I do offer handles for T-Rex scoops, and have just begun offering handles for Xtreme and Stealth scoops (including marine-grade stainless steel threaded insert, bolt, and washer for attachment to the Xtreme and Stealth scoops).  I also have word from Nokta, regarding handle diameter dimensions compatible with their brand-new sand scoops, and can now confirm that I can offer handles for these Nokta scoops as well.  Finally, I have also done a few handles for customers who own other brands of scoops, on a special-order basis.  So, if you are in the market for a great carbon-fiber scoop handle, please contact me either here, or via email at steve@stevesdetectorrods.com, and I'll work to provide you with the handle you need.
       


      Thanks!

      Steve




×
×
  • Create New...