Jump to content

Blast From The Past. Seeing Minelab Military Unit Before It Becomes A Gold Detector.


Recommended Posts


6 hours ago, Gerry in Idaho said:

.

Do you feel, we'll see a detector that can actually see the item or at least the shape of it with any accuracy and if so how long out?

 

Don’t they have a mine detector with ground penetrating radar?

  • Like 1
Link to post
Share on other sites

Can't wait to see this technology applied to treasure hunting. It must be coming up here in this century right???

  • Like 1
Link to post
Share on other sites

It’s already out there in for about $7000.  However it’s just not built into a metal detector yet

  • Like 1
Link to post
Share on other sites

I'm imagining this device to produce for the user something like a highly interactive VR type of GPR video in time with metal detection but almost in a way that those super fancy stabilizing binoculars work to smooth out the shake that I can imagine would be inevitable in a hand held device. By interactive, I mean that you can very comfortably, reasonably, and with much ease, be able to visually search the depths of the ground beneath the [search coil?] in the display when a target response is located. Maybe the display is passive as well! A VR headset that you put on for target recovery???

It'd go like this...

wOoo Hooo... "Oh a target! I will now visually search and identify the size, shape, and depth of it."

**Manipulates controls of state-of-the-art, cutting edge, advanced, Jetsons Treasure Seeker**

"Ah, I see it must be a nail due to the straightness and dimensions!"

--OR--

"Ah, it appears to be the shape of a stone! Perhaps a specimen? I will dig this up."

  • Like 1
Link to post
Share on other sites

I know something is out there, it's just not for recreational use yet.

I fly quite a bit with metal detectors and they always pull my bags aside since they can see the coil windings and or a bunch of dirty coins.

Heck a few years ago one of my Field Staff and I were coming back from Cancun.  I made certain to have my detectors and cheap jewelry in the checked luggage as I did not want them to pull my Carry On.  It held over 3.5 oz of gold and platinum rings.  Anyway, as my Carry On Backpack is being scanned, they pulled it aside.  Some young lady pulls out my container and opens it.  She dumps the rings out and looks at my buddy and I, asking why I have some many rings?  Being as quick-witted Marine I am, I reach back, put my arms around my buddy, gave her a wink and said, "we're gay...is there a problem with that"?

She stuffed them back into the container and off we went.  About 10 feet later I get a serious jab in the back of my ribs and a few choice words from my buddy.

Anyway, the moral of the story is they can see shapes, sizes and density.

I imagine it will be here for regular detecting use in the near future, but at what cost?

Pics are from 1 trip, 2 guys hunting 12 hr days.  We found over 70 rings with half of them gold and or platinum and just those were over 7 ounces.  The nicest one was a ladies diamond ring.20160428_171934.png.thumb.jpg.61bbf7208a6e6df927739bfda75be0b5.jpg

I have never done that good before in Cancun and can only attribute it to a recent storm that cut the beaches away, us hunting 12 hr days and practically destroying our bodies.  It took me 5 days to recuperate after the MD'ing vacation.

His 5 rings with diamonds.0428160753.jpg.30be12541dbc73ed9f5cc506ab94834c.jpg

My best one of the trip.R4.jpg.9fbfe6b63bfc232a34d1fdb1e89552f7.jpg

Ring0.jpg.0593cf3b7dab372aef8020a4bdf36b7e.jpg

CTX 3030's killed it for us.

My 19 gold or platinum rings on the left and his 16 on the right.0428160748b-1.jpg.05479867744a1f3d864ddb54bfc2c76c.jpg

This is the 1st time I've shared these pictures.

Now you know why the airport Security Screener pulled my bags.  We were so lucky that time and I have never kept my stash of gold all together since.

  • Like 5
  • Haha 3
  • Oh my! 1
Link to post
Share on other sites

Jeez Gerry...thats all i have to say...🙂

strick 

  • Like 1
Link to post
Share on other sites
1 hour ago, strick said:

Jeez Gerry...thats all i have to say...🙂

strick 

But my friend...you have at least 1 gold and diamond grill, maybe 2?  I have yet to to wear one.

Link to post
Share on other sites
On 2/15/2021 at 4:03 PM, Gerry in Idaho said:

But my friend...you have at least 1 gold and diamond grill, maybe 2?  I have yet to to wear one.

3 now but you have to hunt where they are...you live in Boise Idaho  I live in the SF Bay area...it would be like trying to hunt for polar bears in Mexico 😃

strick

  • Haha 1
Link to post
Share on other sites
On 2/14/2021 at 2:13 PM, Gerry in Idaho said:

Here's the 1st video Minelab USA did for TV.  You might know the English sounding dude from FL.

What's interesting is we were able to see Minelab Mine Detector as it turned into a gold detector.

The comments towards the end about seeing what's in the ground before you dig it, I'm still waiting.

Do you feel, we'll see a detector that can actually see the item or at least the shape of it with any accuracy and if so how long out?

 

 

Gerry, I can’t find the paper I read about it now, but there’s a Texas university group that posted a report about using standard metal detectors to create an image showing the shape of buried objects on a phone or tablet.  Their system uses a standard usb camera attached above the coil to sense and map the position of the coil as it is moved over the ground , at the same time it reads the signal from the detector to create a low resolution image of the shape and size of the object.  Their primary purpose for developing the system is for low cost mine detecting as it is a lot cheaper than GPR, but maybe it will be available to relict hunters one day as well.

  • Like 2
  • Thanks 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By rob baum
      I bought a house in meadview about 4 years ago.  Every couple months when I go there I try to get over to gold basin to do some detecting or drywashing.  It took me a couple years to find my first nugget out there and its been a couple of years since then and I havent found another.  I swing an SDC and I've read people have done pretty good out there with that model.  I find plenty of lead and boot tacks a inch or two down but not much deeper than that.   What settings are people using out there?  How deep down are people finding the gold?  Would I be better off with a  different model that can go deeper?  I'm not very confident in my abilities since I learned this machine on my own and have only found 2 pieces in the 4 years and dozens of times I've used it.  Any advice would be appreciated. 
    • By PPP
      Hi!
      Another classic question,but i have a ctx3030 with 17inch coil and do mostly detecting in the saltwater.It goes deep and thats what i'm looking for,depth,,I know that SDC2300 is a PI machine and very sensitive to gold.But when it comes to depth comparison in saltwater and knowing the SDC2300 has 8 inch coil,then the question is which detector goes deeper?is it worth buying that expensive unit just for saltwater beahhunting? 
    • By Bear
      Glad to see Simon is back.
      I know there are previous posts about SDC battery compartment seal, I had problems with mine this summer.  
       
      Here is the background that I have posted about before.
      I dredge in an old cut that wasn’t cleaned that good into the bedrock.  The bedrock is a quartz muscovite schist that through frost shattering and dissolution is deeply weathered making it easy to dredge into for a couple of feet.  Because it is a cut the water is always murky and work is done by feel.  A couple of years ago I dug a big section that I thought was cleaned up.  Previously I seen a guy use an Excalibur to check where he had dredged so I took the SDC in.  There was targets so dredged deeper and recovered a couple more nuggets.  Now this has become standard practice.  
      This summer while changing the batteries there was water in the battery compartment.  I cleaned and dried the compartment.  Also cleaned the seal and the machine worked fine but I would like to change it.  Through a search nobody sells replacements?
    • By Lunk
      With the fantastic weather in the Rye Patch region during the month of October, I was chomping at the bit to get down there, but my summer job didn't end until the 30th. It still took me a few days afterward to get everything wrapped up, so I finally hit the road and met up with Gerry and friends at Rye Patch the following Tuesday. The detector training class we were scheduled to give that weekend ended up being cancelled, thanks to a winter storm that was forecast to move into the area on Friday. Needless to say, having only two days of optimal detecting conditions before being snowed out and forced to move on to Arizona was a total bummer.😞 Intent on finding a few bits of gold in-spite of the looming storm system and armed with our trusty Minelab GPZ 7000 gold detectors (and one SDC 2300 - also quite trusty, btw), we hit an old patch in hopes of digging up some previously overlooked yellow metal. Only two small nuggets were found after a couple of hours searching with four coils on the ground - not a very good start. It was then that I remembered another old patch nearby that I had completely forgotten about, it had been so long since I had been there. It wasn't a very good producer back in the day, but perhaps we would be able to find a few nuggets that the VLF and early PI machines may have left behind. Within minutes of hitting the ground, my good friend Chef Rusty and I both popped a shallow sub-gram nugget; not a bad start. Soon, everyone was digging good gold! My second target gave an obvious yet deep sounding signal response from the GPZ's stock 14” coil. I imagined it to be a three or four gram piece at a depth of 12” to 18”. Gerry noticed me digging quite an excavation and came over to capture the action on video. At a measured depth of 20”, the target was finally out of the hole, and as I held it aloft there was an audible gasp from the audience that had gathered to watch, followed by cheers and fist-bumps:

       
      After a thorough cleaning, the specimen weighed in at a whopping 40 grams - a totally unexpected and pleasant surprise! The nuggets kept biting sporadically for everyone the rest of the day, and the same was repeated the following day. Just goes to show that sometimes the ZVT tech can really ignite an old burned-out nugget patch. Much fun was had by all, and it really made up for such a short two-day detecting trip. Pictured below are my finds, including the 40 gram chunk, a couple nuggets at over 8 grams, and all the small bits, with a total combined weight of over 66 grams.
       

    • By Steve Herschbach
      Four used ones advertised on The Classifieds in the last couple days, one sold already. Seems like Gerry’s circle of people... you know something the rest of us do not know Gerry?

    • By Donnie
      Am wanting to purchase a Sdc 2300 all checks out on serial numbers etc and is a good price with many extras.
      my concern never using one before I set up three pieces of lead. 0.05g , 1.13g, 2.00g.
      i ran the Sdc over the three individual and the two larger pieces good solid signal up to 300mm lift.
      it would not pick up the 0.05g? Also ran it over 2.5g nugget yep good signal.
       
      i then ran my old AT Gold over the three same. As per the Sdc the AT went off and up to 300mm difference here is the AT picked up the 0.05g light signal but good solid number at around 50mm lift.
      AT also same on nugget.
      my question is shouldn’t the s
      Sdc have picked up the sub Gram lead?? Isn’t that what it is supposed to grab onto??
      Im a bit lost as to what to do now purchase/don’t purchase Can anyone confirm that it should have picked that up, could there be a problem with it.
       
      really want it but was expecting it to leave the AT Gold for dead??
       
      Thanks Guys
      Donnie
×
×
  • Create New...