Jump to content

Big Gold Nugget Found - Arizona - GPZ 7000 - Video


Recommended Posts


Nice nugget, guys, congrats!

Link to post
Share on other sites
34 minutes ago, Rob Allison said:

including "Two Toes" nice crevice tool he shipped me.

Thanks for sharing, Rob. Very nice!! And yeah, I love the Two Toes crevice tool too and have it always with me. But probably unlike you, I had to pay for it 😉

  • Haha 1
Link to post
Share on other sites
1 hour ago, Rob Allison said:

Hello All,

   Here we are again, a partner and I placering a dry creek bed.  The process of placering is to remove all the overburden (rocks, gravel) and process or work the paypayer/bedrock.  We are doing that by using rakes, shovels, crevice tools and then using metal detectors to scan the paylayer and bedrock for gold nuggets.  

This process is back breaking hard work, but can be very rewarding in the right locations.  As you can see in this video, we hit a nice crevice that had a hidden beauty in it, a 3/4 ounce gold nugget.  The nugget was wedged below the hardpack gravels and wedged in a bedrock crack.  

In this video we were using the Minelab GPZ 7000 metal detector, Garrett AT Pinpointer and several hand tools, including "Two Toes" nice crevice tool he shipped me.  We have gotten a ton of use from this tool, very good on narrow bedrock cracks and holds up well.  Contact Gary for more information, or visit his "Two Toes Youtube Channel.  Thanks Gary!!

Remember, the true treasure is the ability to get outdoors and enjoy your friendship with others that also enjoy this hobby.  

God Bless,

Rob

https://youtu.be/zsrObuxom60

 

 

Nice job gentleman, great nugget!

Link to post
Share on other sites

Great find and hard work to get it, but I know it was well worth the time.

Good luck on your next hunt.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Gerry in Idaho
      I like detecting for a variety of gold and really enjoy finding the stuff many higher end detectors can't see.  I don't know yet, but feel the extra capabilities of the GPX-6000 will open up some of these areas I hunt with the VLF's to get even more of the gold and at greater depths or in worse soil conditions.  As long as I am getting more gold, I'm happy.  Will the new GPX-6000 see this kind of gold or act like all other PI's and the ZED and not see at all?
      I recently recovered this 4.2 gram speci with the EQ-800 while running the new CoilTek NOX 15" round.  My goal was to find a piece of gold with the 15" and I met that goal.
      Part of some other testing back at base proved why I still like to take 2 detector technologies in the field.  This particular beauty was found right in the middle of a GPZ-7000 grid area, along with 4 others while using different coils on the EQ-800.  All 5 pieces specimens have visible gold and a couple how quite a bit, but to the point.
      The reason I found them in that gridded area, is because the GPZ-7000 does not respond or on a couple right near 1" and that's it.  I teach folks this in my classes, as well as try to educate others on the goods and the bads of different detectors and technologies.  Sometimes I get detectorists who are good hunters with their detectors and have success, tell me I'm full of BS and their detector will find it.
      I made a post on my FB (Gerry McMullen) and shared a pic of the find along with the true comments of, the GPZ will not see it.  Between the private messages and or public posts, I was immediately informed by a few of BS and even told how I must not know the GPZ-7000.  One well known GP-3500 hunter even said he guaranteed his 3500 would hear it.  
      I know gold detectors and I know how to find gold with a variety of gold machines.  No I am not the best, but I most certainly can hold my own and I learn to adapt really fast to a new area.  Traveling to different states and countries to hunt for and find many different kinds of gold has helped elevate my detector knowledge and skill of many models of detectors and the differing Au rocks I have collected. 
      So here is hoping the GPX-6000 with it's GeoSensing can respond to this little beauty.  If it does, I know of some areas I'll be swinging the 6000.  If it is like the GP-3500, the GPX-5000 and the GPZ-7000 and misses it, that fine too, I know what they can't see and realize it,  I will also know where not to use the 6000.
      Bottom line for everyone.  Please learn the kinds of gold your detector is good at finding and what it is not, so you aren't wasting time  in those areas.  Or be sure you have at least 2 different detector technologies.

    • By Lunk
      Well I'm laying over in northern Nevada for some detecting before heading back to Idaho and my summer job, and decided to go revisit an old dink patch with the GPZ 7000 this afternoon. Since I've hit this place pretty hard, I figured I better use a higher sensitivity setting to see if it would light up some bits that were missed last time using a lower sensitivity that helped keep the alkali rich ground feedback under control. Needless to say, I had to move the coil painfully slow over the really noisy areas, but the extra sensitivity started working its magic right away, as I got a faint but repeatable little wobble. Digging down about 3 inches or so revealed the first little bit of yellow. 🙂

       

      Soon there was another signal a few yards upslope; another shiny golden bit, this time a little deeper.


      I couldn't help but wonder at this point how much deeper the new GPX 6000 will be able to snag dinks like these, and how many the Zed is leaving behind. 🤔 Guess I'll find out when I finally get mine. Just then I was awakened from my wonderings by a sharp response from the Zed; sounding pretty shallow, the tiny target was out from under a bush with just a boot scrape. And I mean tiny!


      One more golden goodie sitting on bedrock ended a splendid, sunny afternoon in the goldfields.


      Total weight of todays finds, zero point six of a gram.
      Good luck out there!

       
    • By Smithsgold
      Hillside Detecting for Placer Gold Nuggets 
      Armed with a Minelab SDC 2300 and a White's Gold Master V-Sat Jeff and Gary (Two Toe's) try some Hillside detecting for Placer Gold Nuggets. High bench gold in the morning and River deposited gold in the afternoon. We moved a lot of rocks and brush looking for those elusive Nuggets and didnt go home empty handed !!!
      Our Hawaiian buddy Tim ( Blue Lead Gold Productions ) likes to send me pictures and video of what we are missing on the island during the winter months so I've included a few clips from him in the video. Hope you enjoy the video.
      SG 038
       
       
    • By afreakofnature
      Had to hike in last weekend to get the tiniest piece I have ever detected.  Packed up the SDC and off we went!  Atleast it was not a skunk day but dang, if you like small gold the SDC can hit it at 3” with an obvious signal.  Took me longer to get it in the scoop than dig it out of the hole 😂.  Also added to my square nail collection 😂.
      Dinks!  Its what the world is made of 😂😂.
       




    • By Condor
      We caught a break in the 90+ temps in Yuma for one last trip.  Ostensibly, it was to be a quick trip to the spot we found the bigger gold in Feb and to test the X-Coil 15" Concentric coil over the ground we had covered extensively with the X-Coil 17x12 and stock coil.  It's about a 1/2 mile walk to the spot but I pulled up short to detect a wash we were about to cross.  My friend with the Concentric coil went on to the target area.  I am using the 7000 with stock coil while waiting for some re-work on my patch lead for the X-Coils.  
      I had worked the lower sections of this particular wash back in Feb and found 6 little bits in one small area, the rest of the wash seemed barren.  My goal was work the wash towards our target area just to get the machine warmed up and my listening skills tuned in.  I was working pretty quick really looking for a sitting duck rather than slow and methodical because this wash hadn't produced too well.  About 100 yds on, I hit a pretty good tone right up against the wash sidewall.  I pulled out the bigger of non-specie gold in the picture.  From there over about 20 yds I pulled 3 more small pieces then hit the smaller specie gold on an inside bend of the wash.  I continued up the wash and found the bigger specie dead center of the wash down in the bedrock.  I found 1 more tiny bit up on the bank, but then starting hitting a lot of trash targets so I turned around and reworked the wash for 0 nuggets.  Because of the specie pieces I then started a circle on the hillsides all around the area for nothing.  
      I put down my gear and walked to the target area to check on my friend with the Concentric coil.  He had found 2 pieces in an area well detected on our previous trips and attributed it to the overall sensitivity of the Concentric on small targets.  Because of the heat and short trip we had no opportunity to make any comparisons on undug targets.  
      I worked my way back down the wash to the RZR, over areas I had covered in Feb.  On the last bend I was picking my way down a slick rock slide area and waved my coil over some overburen covering a layer of bedrock above me.  I got a faint tone and started pulling down the overburden and reached some decomposing granite bedrock.  The target sound got better so I ended up busting out the bedrock trying to pick up the target down in a deep crack.  As I got further down, the target got weaker and I thought I was pushing it deeper in the crack, so I busted out some more bedrock.  I finally picked up a half a matchhead size nugget and thought that just couldn't be right.  As good as the 7000 is on small gold, that just didn't seem right.  I then waved over my spoils pile with all this overburden and busted up granite.  Targets everywhere.  The sun beating down on me and I'm on my knees sorting through the spoils trying to pinpoint tiny targets with a 14" coil.  After about 1/2 hr, I got most of them, 6 matchhead size nuggets.   If I had my handy NOX, I could have made short work of this mess, but maybe I'll go back for the crumbs next year.  
      I'm moving to Reno in a couple weeks, I'll be a snowbird in Yuma next year.  
       




×
×
  • Create New...