Jump to content

Recommended Posts

I know. But with three inches of ice on the ground and a request so be it. Zero mode at max depth. I'm now the "Big Pimp" of the Relic Fields. Oh my!

20210218_110212 (Small).jpg

20210218_110223 (Small).jpg

20210218_110232 (Small).jpg

Edited by George Kinsey
add
  • Like 7
Link to post
Share on other sites

Let us say 15 inches . To obtain the value for a target buried in the ground substract 30% , this gives 10,5 inches ( 26cm ) estimated in the ground .  The Equinox 11coil depth is around 11 inches , so their perfos seem to be similar ...

  • Like 1
Link to post
Share on other sites

Pretty impressive. How well does the Apex and superfly balance out? Total weaight approx?

Last question are the numbers bit more stable? Found the Superfly more stable on my Multi Kruzer than the stock.

  • Like 2
Link to post
Share on other sites

The detectors balance is great. Feels very lite to me. When the ice melts I will get out and test the numbers and stability in my iron enriched Virginia red clay. 

 

  • Like 4
Link to post
Share on other sites
  • 2 months later...

Ever get a chance to test that SuperFly out in the field?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By palzynski
      I went today to one of my favourite testing areas , a very old site in a forest , low mineralized soil but infested with thousands of nails.
      It is my first outing there with the Apex . I decided to use the Ripper (5X8)coil instead of the Viper ( 6X11 ) because of its smaller size which means better separation , and also because it is lighter than the Viper ( 330g instead of 400g ).
      Up to now I had only done a few short outings with the Apex in less difficult areas , so I have some experience
      of the machine and its settings . I already know that it works very well in iron trashed areas , but I am
      wondering if it will do the job in todays "extreme" outing ...
      Ok lets start the detector . First thing the Apex is very stable , almost silent on the nail bed. 
      There is no noise at all compared for example with the ML multifreqs like the Equinox or the Vanquish ,
      which is a very good thing. My settings : Jewellery mode , freq MF , sens MAX.  Apex soft. version  :  1.28
      I found my first coin only after 5 minutes . Very good news because it is difficult to find new targets
      here. The Ripper coil has the perfect size for hunting (very) small roman coins . It is also very easy
      to center the targets with that coil , no pinpointer required.
      The MS3 wireless headphones are excellent and very reliable , it is a pleasure to use them.
      An important thing , in case of a doubtful signal I always press the Iron Audio button to have more audio info.
      This "Iron Audio" is just equivalent to the Equinox and Vanquish AM ( all metal ) function.
      I dont know why Garrett did not simply call this button AM instead of "Iron Audio" ...
      The signals on targets are sharp and clean , may be a little too sharp , I would have preferred
      a little "softer" audio , but it works very well and this is the most important
      Long story short , I found a total of 6 coins during 1 hour , which is a very good result.🙂
      I am not sure that I would have found more coins with my Deus HF which is a reference in iron trashed areas.
      So I confirm that the Apex is a very good detector in iron trash. It outperforms the ML multifreqs
      in iron trash to my opinion. It is very good on tiny targets as it can be seen on the pics below. Compared to the XPs the Apex is probably quite close to the Deus in terms of separation , but the Deus has the edge concerning its weight ( 800g for the Deus instead of 1150g for the Apex/ripper ).
      On the other hand the Apex is probably much better than the Deus at the beach, and could be a good choice for users looking for a detector performing very well on both inland and beach hunting  ...
      So conclusion of this test the Apex is a very good detector , both easy to use and very efficient in the field , especially with the excellent Ripper coil ... 
       
      GARRETT APEX + RIPPER COIL  --   PLUS AND CONS :
      THE PROS :
       . excellent on iron trashed areas 
       . very good audio / excellent iron filtering
       . sensitive to tiny targets as well as bigger ones ( multifrequency )
       . fast and reactive/accurate on targets 
       . a light detector , weighting only 2.4lbs (1,1kg ) with the Ripper coil
       . the thin control box
       . the lithium/ion battery
       . easy to use even by beginners
       . the excellent MS3 wireless headphones
       
      THE CONS :
       . VDIs a little unstable
       . the rod outdated compared to other brands
       . the coil cable too short for tall persons ( above 6 feet/ 1,85m )
       . no dedicated backlight button 
       . the running freq info ( 5k,10k ... , MF..)  NOT displayed on the main detection screen
       
      ----------------------------------------------------------------------------------
      A few pics of todays outing below  ...
      1) First coin with the Apex/Ripper :

       
      2) A bigger one  ... :

       
      3) Total 6 coins :

       
      4) Back home , after cleaning , a nice roman coin : Constantinus , AD 360 , 1660 years old !  :
      legend : CONSTANTINUS PF AUG

       
      reverse legend : GLORIA EXERCITUS

       
      5) The Viper 6X11  and the Ripper 5X8 :

    • By Steve Herschbach
      This release brings your Apex up to date with all improvements made since its introduction. Some of these enhancements include:
      Improved overall stability Faster and more accurate ground balance in saltwater More accurate pinpointing More distinctive tones to better differentiate good targets from iron Backlight powers on temporarily while making Menu changes https://garrett.com/apex-update-instructions

       
    • By Steve Herschbach
      I figured I needed a smaller coil for the Apex, so ordered and it just showed up. Ground is thawing so should be able to use very soon. I like this detector and this coil makes it a real featherweight. 2 lbs 7.7 oz or 2.48 lbs with scuff cover. I like small coils and this is a sweetie, well made, and nice to buy a coil and a cover for reasonable price for once, $119 plus $10 for scuff cover. Garrett part# 2223800

      Garrett 5" x 8" Ripper coil for Ace Apex

      Ace Apex with Ripper coil

       
    • By Steve Herschbach
      Jan 25, 2021 NQExplorers - In this video we explore the advanced features of the Garrett Apex metal detector in more depth and give some insights into how the machine works and ways you can use these features to maximise your success. Thanks for watching! Warren and Colleen.
       
    • By Dances With Doves
      How would you rate it's performance for the places and way you like to hunt so far at a scale of 0-10  ?  10 being the highest.  
    • By Monte
      My primary-use Garrett Apex sports the excellent 5X8 DD 'Ripper' coil that is ideal for most of the places I like to hunt, in town or rural and remote.  On my 2nd Apex I keep the really functional 8½X11 DD 'Raider' coil mounted for working plowed fields, similar range-land, or wide-open / sparse-target parks and similar places.    I ordered my 3rd Apex just to keep the smallest search coil mounted where it needs to fit in and around and between dense brush, rocks, building rubble, etc., etc.  For now I am going to mount the new NEL 5" 'Sharp' DD coil because that is the smaller coil currently available for the Apex.
      I've been hoping for them to offer their functional 4½" Concentric coil, if it is designable for the Apex.   It can be worked on the single-frequency models and i am hoping it can be made to work on the Apex.  I like smaller 4½ to 5" coils to get in and around really tight cover, especially Relic Hunting older sites.  Plus I would like it to be a Concentric coil deign for the Apex in that smaller-size.  I have used DD coils as well since 1971, and while I have DD coils now for my three Apex, and on my V-540 and Simplex +,  I have Concentric coils o my XLT, F5 and two favorite Tesoro models.
      There's a time and a place where both coil types have some advantages, so I'll keep hoping.  I'm curious how many Garrett users currently make use of the 4½" Concentric coil on which models, and do any of you have a desire for one for the Apex?
      Monte
×
×
  • Create New...