Jump to content

Recommended Posts

Does anyone have any advice on how to make the arm cuff wider.  I don't remember the orx being this tight. I don't have large forearms so I know there's guys having the same problem. Thanks!

Link to post
Share on other sites

Have u tried boiling water???or hot air gun???

 

RR

  • Like 2
Link to post
Share on other sites
2 hours ago, Rivers rat said:

Have u tried boiling water???or hot air gun???

 

RR

Haven't tried anything yet. Those sound like good ideas. Was hoping someone had already had success in making it wider and would share how they did it. Thanks for the ideas!

Link to post
Share on other sites
2 hours ago, Rivers rat said:

Have u tried boiling water???or hot air gun???

 

RR

Wow!! The boiling water and the right sized tin to snap it on to then ran cold water on it and its perfect. Thanks for the idea!

  • Like 2
Link to post
Share on other sites

I’ve used this method to both widen and narrow various arm cuffs. Easy squeezy 

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Kaolin washer
      Special thanks to Calabash digger for his reasearch on the pitch mode being good in iron , and His heads up on keeping the silencer at -1 so the target does not get masked in iron . well i used the pitch mode on the DEUS and kept the silencer @ -1 and it came thru for me , Got a good hit on many non ferrous targets today and some right next to iron . i was using the full tones but when i seen Calabash diggers VDs on the pitch mode i had to try that and it has proven to work very well  the VDI on this target was 49 and 50 right where a 22 casing comes in  or some foils . glad i dug it 


    • By relicmeister
      I’d have to say the Orx has been a successful venture for XP. But what comes next?  Their R&D must be working on a next generation detector, so what direction do you think they will go? An incremental change in existing technology or a whole new direction?  I haven’t a clue but I’m interested in what others think might be coming in the future, although right now I’m sure their focus is on getting their stock replenished after COVID 
    • By Kaolin washer
      trying to decide , 11inch coil x35 or the 11x13 x35 anyone have experience with both 
    • By Duran
      Heading to low country in South Carolina looking for good custom programs to pick out those rev war buttons.
    • By Steve Herschbach
      Jan 29, 2021 by Relics & Rings - Quick video for those who are interested in setting up the Deus for gold nugget hunting.
       
    • By Bretski
      I have a standard Deus with the 9.5 and 9 inch HF coils. There is gold in our area, though the pieces are generally quite small, under 1/10th of a gram for sure. Anyone have any experience or advice on hunting gold with the Deus? Most of our gold is in big rocks and cobble as well so it's hard to work around them and get the depth we need.
      Your thoughts?
      Thanks
       
      Brett
       
×
×
  • Create New...