Jump to content

Did A Test With The Equinox 800 And Anfibio At A Sandy Lake Beach On A Gold Ring


Recommended Posts

On 3/21/2021 at 11:35 PM, Rick N. MI said:

I'll try it again tomorrrow with the AF28 11" coil. I'll try 14 khz and 20 khz. I'll max gain with a real slow sweep in deep mode. I'll let you know tomorrow.

 

nokta-makro-anfibio-kruzer-af28-search-coil.jpg

Hi Rick,

 

Thanks for sharing your results.  I just picked up a used Anfibio Multi and it's 11" coil looks just like the one in that photo, not like the ones I've seen in videos or on websites, which have what appear to be support arms connecting the 3 braces within the area of the D shape.

Did they change the coil at some point?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Jeff McClendon
      A "new", easier to operate, gold probability scale 61 kHz nugget prospecting detector using the Anfibio platform from Nokta Makro. I did not see this coming......
      https://www.noktadetectors.com/metal-detector/gold-finder-2000/

    • By Gerry in Idaho
      I like detecting for a variety of gold and really enjoy finding the stuff many higher end detectors can't see.  I don't know yet, but feel the extra capabilities of the GPX-6000 will open up some of these areas I hunt with the VLF's to get even more of the gold and at greater depths or in worse soil conditions.  As long as I am getting more gold, I'm happy.  Will the new GPX-6000 see this kind of gold or act like all other PI's and the ZED and not see at all?
      I recently recovered this 4.2 gram speci with the EQ-800 while running the new CoilTek NOX 15" round.  My goal was to find a piece of gold with the 15" and I met that goal.
      Part of some other testing back at base proved why I still like to take 2 detector technologies in the field.  This particular beauty was found right in the middle of a GPZ-7000 grid area, along with 4 others while using different coils on the EQ-800.  All 5 pieces specimens have visible gold and a couple how quite a bit, but to the point.
      The reason I found them in that gridded area, is because the GPZ-7000 does not respond or on a couple right near 1" and that's it.  I teach folks this in my classes, as well as try to educate others on the goods and the bads of different detectors and technologies.  Sometimes I get detectorists who are good hunters with their detectors and have success, tell me I'm full of BS and their detector will find it.
      I made a post on my FB (Gerry McMullen) and shared a pic of the find along with the true comments of, the GPZ will not see it.  Between the private messages and or public posts, I was immediately informed by a few of BS and even told how I must not know the GPZ-7000.  One well known GP-3500 hunter even said he guaranteed his 3500 would hear it.  
      I know gold detectors and I know how to find gold with a variety of gold machines.  No I am not the best, but I most certainly can hold my own and I learn to adapt really fast to a new area.  Traveling to different states and countries to hunt for and find many different kinds of gold has helped elevate my detector knowledge and skill of many models of detectors and the differing Au rocks I have collected. 
      So here is hoping the GPX-6000 with it's GeoSensing can respond to this little beauty.  If it does, I know of some areas I'll be swinging the 6000.  If it is like the GP-3500, the GPX-5000 and the GPZ-7000 and misses it, that fine too, I know what they can't see and realize it,  I will also know where not to use the 6000.
      Bottom line for everyone.  Please learn the kinds of gold your detector is good at finding and what it is not, so you aren't wasting time  in those areas.  Or be sure you have at least 2 different detector technologies.

    • By Tahoegold
      So, I really like the Makro Gold Racer. I keep finding more things about it. Recently, I found a really tiny 14k gold chain visually, just lying on the ground.  I had my compadre and it couldnt pick it up. I took the chain home and tried it on my GR. I had the factory settings, 10 on disc, using Disc 2 the deeper one, and tone break at 30. Nothing, I couldn't get it to detect it.
      So, while I was waving this chain in front of the 10" DD coil I started lowering the disc, I realized the ID number was about 3. So, I experimented with going one number at a time all the way to 0. At 1 I could get a somewhat clear signal. At zero it was a nice signal. Even the big coil coild pick it up at about an inch.
      I have been trying to find micro jewelery with no luck. Maybe this is why. I have not used the disc mode in all metal. You see, I really like the clear signal the disc modes give. I have a hard time "reading" the all metal mode. I can really hear the signals in the disc modes. Why is the all metal mode so hard to understand? So very faint target sounds compared to the really obvious ones in disc.
      So, am I searching in all metal when disc is at 0? It sure seems as deep and sensitive as all metal. I get much more audible info than all metal in my opinion. However, I have to state here, I'm not an expert. I know the all metal has a way of indicating a target with thresh hold sounds too, or, the silence of the thresh hold sometimes on tiny targets. But, it's not as easy as this method. I really could hear this tiny chain this way.
      Can I hunt just as effectively like this or should I keep trying to learn the all metal mode? What's your opinions? And, please, lets keep this discussion to the Gold racer and those who have one. 
      I'm actually really glad to have discovered this. I'm fortunate to have this chain to test.
       
        
    • By dogodog
      My day started by taking my wife to breakfast and a trip to a local greenhouse. On our way back we drove by a place I have wanted to hunt for a while and couldn't because the owners were just not to friendly. But low and behold I noticed some new house development signs. I did a quick title search and found out it was sold and being developed very soon. So I grabbed my stuff and headed back to this 1830's house. Today was the first day since I got the 800 I could spend more than an hour and a half detecting. My first two hours were a pretty much a bust except a cool silver plate spoon and my wife texting me to see if I found anymore jewelry? (NO) I was getting a little frustrated and decided to focus on a small strip of grass (three feet wide) next to the driveway and an overgrown pasture. After five feet  I got an OK 28-29 signal that was kind of bouncy. First good coin popped out a 1905 barber quarter (yes) Things were looking up. I jumped across the driveway and hunted near a rather young pine tree. Two swings and boom a 24-26 and out comes a 1919 mercury. Things are getting interesting. I stood up after digging the merc, swung again got 23-24 at 9 inches out comes a coin that had me wondering what the hell is that. after a little quick cleaning I realized I had a 1832 classic head 1/2 cent. But this was no ordinary 1832 this has an over stamp with a cross and the initials FZ. It seems that it was stamped early in its life. I'm wanting to know if anyone has ever found a coin with stampings? I have found a lot of good coins, but this has now become my favorite. The day came to an end and I had to go and enjoy some burgers on the grill. 
      Almost forgot the spoon, Its an american airlines made in the 1930's with the shape of a dc-3 and the words flagship on it.








    • By dogodog
      Went to a local park today after work. Only had a couple of hours to detect and test out my new home made arm cuff. I wasn't a big fan of the plastic, and it was a little too wide and flexy for me. At this point I only have about 5 hours on the 800. The first hour today netted me a handful of clad and some misc. corroded zinc. The next hour was the same thing clad and junk. With only 15 minutes to chicken parm, I got a really nice 28-29, not expecting anything great, I proceeded to find out what it was. For a split second I thought it was another odd piece of stainless, But I quickly saw Tiffany and co. Wooooo Hoooooo. Now I had a good excuse for being a little late for dinner. My wife would never get mad for a Tiffany ring. It is about 6.16 grams and polished to like new. Oh and the cuff was a winner too. fits my arm and no slop. I made it out of an old no parking sign and the factory bottom section. It took me a few hours to create, but I'm happy with it. Have to give a shout out to Kac for the hand digger, Still works great and hasn't failed me yet.






    • By dogodog
      Well after a long frustrating wait for Nokta's  multi frequency machine, I could no longer wait or hold out. I received my new equinox 800 on the 19th and did some air tests and made a list of the VDI's and played with flipping the tones for my liking. After thinking the machine was just OK with some of my basic testing, It was time to run across the street to give it a run. I will tell you all that I have hunted this area to death with my MK. ( or so I thought) I only had 90 minutes to give its first test.  I decided to dig every target with an 18 or higher VDI.  Just trying to decifer my new sounds. First 5 min. netted some clad, but the next 85 broke all my records. first 3 coins after the clad were large cents, the next was a draped bust 1/2 cent (bucket 1) The next was a paper thin copper with a shield, could it be? Yes it was a New Jersey copper. I have been chasing this coin for years (bucket 2). Then a single button and an Israeli 1/2 shekel (not sure how that got there). I only had a few minutes left to hunt when I got a faint 18 on the nox and hit a button at 10 inches, But that wasn't all this hole had to give. It was like a button slot machine, 12 in all and total of 15 inches down. My wonderful wife called and I had to leave for dinner. I have to say the most impressive feature on the nox is the noise cancel, It made the site come back to life. As for settings, Park 1, sensitivity 17, and custom tone breaks and t1 - 1  t2- 25  t3 - 15  t4 - 10  t5 - 5  Tone sounds, I run them to get low tones on copper targets. Sounds odd I know, but it works for me. Have to say I'm impressed with the first 90 minutes I've run the 800.









×
×
  • Create New...