Jump to content

3d Printed Battery Pack For Whites Machines

Recommended Posts

On 3/24/2021 at 6:25 PM, PimentoUK said:

This impartial, honest, battery test website is well worth a look:

https://lygte-info.dk/review/batteries2012/Common18650IndividualTest UK.html



That's a Great site, have almost every 18650 I've ever seen.. And Great details on each.

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

Just received and works great!  👍


  • Like 2
Link to comment
Share on other sites

Does anyone make a battery pack for a 6000 Di Pro? 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By HotSauce
      I am going to do a little complaining and its only directed at Minelab batteries. As an owner and consumer  of Minelab products I have to say their  GPX  Li-Ion stock battery with amp disapoints. Never had a problem with them charging and holding a good charge, of course over time the batteries time is reduced. My grip is with the amp, this is the 2nd battery that the amp failed , its a shame that  a 440 dollar battery the amp goes out after 2 years. This should not happen on such an expensive battery, are these amps or amp connectors replaceable? 
    • By billdean
      This is from Steve’s GPX 6000 accessories page. 
      The following items do not come with the GPX 6000, but are likely to work with it based on what is known so far. This is preliminary guesswork, and it is not advised a purchase be made based solely on the information presented here.
    • By oneguy
      Shutting it down for this season. During winter I routinely charge up my tector batteries once a week or so for the 6-7 months until spring.  Question.....is this the right thing to do?  What happens to battery life if I don't keep them charged up?  Also curious if I need to keep the wireless ML phones charged regularly and what happens if I don't...???
      Thanks for the input.....
    • By brys
      i have had to use a 3rd party clip clamped onto the coil with a G clamp to charge the coil as the coil cover is out of shape despite it being new and unblemished
      its buckled in the area of the contacts ..both  clips wont contact the terminals so i took off  the coil cover to connect the 3rd party clip with a clamp
    • By sturt
      Hi all. I use a GPZ 7000 at the moment. I will be looking at the new 6000 early in the new year. I spoke to a supplier today asking if the mains charger for the 7000 is compatible with battery for the 6000. WAS TOLD NO, as the 7000 mains power transformer supplied is 18 volt not 12 volt.
      Looking at both systems firstly the 7000 series.   Tansformer   input 240 volt- 0.7 amp    output  output 18 volt- 1.67 amp
                                                                                        Goes to BC 10 cradle   input 11-30 volt  23w max   output  8.4 volt- 2 amp AND  5 volt- 0.67 amp
                                                                                        The battery states 7.2 volt  total capacity 72Wh
      Now the GPX 6000                                                 Transformer  input 240 volt- .5 amp Max   output  12 volt- 10 amp
                                                                                       Trans plugs directly into battery   input 12 volt- 1.0 amp?  output 7.2 volt- 42Wh
      What this tells me is Minelab have produced a new detector which uses the same voltage to run as the 7000 but the charging components are not compatible between the models. Should be.
      The new 6000 uses a reduced capacity battery (weight issue?)which  does not last the full day, then you need a spare which you cant charge with mains power until the original is fully charged in about 5/6 hours. After a big day in the field I cant stay awake to swap the batteries so I need another transformer as well?
      I am told by the Dealer though you could use the two car power leads as they are connected to a 12 volt car battery. Cheers sturt
    • By Skookum
      I had something strange happen, today. I had my GPX 6000 battery fully charged and fresh off the charger.  It had completed its charge cycle and then trickle charged overnight.  I popped it in the detector and started detecting. Within five minutes the battery meter dropped from three bars to two bars.  If I turned off the detector and let it sit for a 5-10 minutes and then turned it back on, it would go back up to three bars for a short period of time before then going back to two bars. Has anyone else noticed this with theirs?
  • Create New...