I Got My Equinox 10" Elliptical Coil

[CPT_GhostLight]

Well , my fix worked and there appears to be no internal damage to the coil. I got to try the 10x5 in a coal mining ghost town that only lasted from 1880 to 1920. The ground in the entire area was saturated with large to microscopic iron and tons of old aluminum as well. I used the 11" coil for a while but the deluge of tones was deafening. So I swapped to the 10x5 and I immediately got a clear and stable 20 on the TID. The tone cut right through the noise floor and it was a 200 year old ladies copper ring. Unfortunately the two stones were gone. The results convinced me that the 10x5 is a keeper. I also tried the 6" coil in the same ground and it also performed well, but with a smaller sweep coverage, so the Coiltek 10x5 defnitely earned it's place with the other coils.