Jump to content

Recommended Posts


The gpx 6000 seems to give a strong signal on tiny gold targets. It picked up some nuggets at nice depth too.  I can see this machine as capable of warding off skunk days by at least getting the user some small stuff most times if in a good gold area.

 

On the other hand, in a trashy area, the high sensitivity is going to make all those tiny wire pieces, iron fragments and lead splatter pieces also really sound off. I did notice the 11" mono coil pinpoints really well with good sensitivity and audio so that is likely to speed up target recovery considerably. I hope this user or others post some videos of the 6000 with the larger coils in action to see how those perform in comparison. 

  • Like 1
Link to post
Share on other sites
  • 3 weeks later...
On 4/19/2021 at 11:40 PM, Steve Herschbach said:

Apr 19, 2021 The Gold Rush Guy - "Great to finally get the new Minelab GPX 6000 and take it out for a run. Very impressed with its sensitivity, especially the depth of even small pieces of gold. Apologies with the video quality. Will rectify in future hunts."

happy wheels

Great start - some nice bits and the overall weight is impressive.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Elijah
      Hello gentlemen, finally someone from the Australian guys made an honest comparison
       
    • By schoolofhardNox
      Made it out for a day at the beach. It seems like ages since I been out. The crowds were starting to gather since the weather was perfect that day. I was able to hit my favorite stretch of the beach for the most part. I started out trying for silver but decided to concentrate on low conductors, hoping for some gold. Total of 40 nickels that hunt, counting the war nickel. I ended the afternoon digging for high conductors as well, and was rewarded with yet another half dollar. Using a PI, you cannot get away from digging the deep, rounder shaped big iron since it could be a deep half, so I dig it. Some of longer iron items and shallow smaller nails, I could have avoided if I wanted to. I did manage to find a nice 10K tiny gold ring, so that made for a great day. Average depth was about 14” on most items. The ring was fairly shallow, probably around 7”. Total coins I believe was 100, so a high coin count. The usual copper and lead bits also found. Most items were resting on the clay layer or near it. Great to get out and enjoy the day.






    • By Gerry in Idaho
      I've read a few posts from those who have both and their input is pretty much what I expected.
      Having fun (especially with others) is the majority of why I enjoy detecting.  Only a select few actually do it for a living and do well.  The rest of us (me included), enjoy the hunt, adventures, comradery with like minded friends, and getting some gold on occasion. It's looking like the GPX-6000 is getting the majority of gold better than the GPZ-7000.  So, is the extra weight worth the rare occasional big nugget?  Lets go a step farther.  Say the ZED hits a 4 ounce nugget at 34".  Will the 6000 hit that same nugget at 30", 32" 33" or 34".  Say it's 2" less and only gets the chunk at 32".  It's still near 3' deep which is deeper than most folks enjoy digging and or most other detectors out there.  
      So the reality for most folks, the GPX-6000 at a cost savings of $2000 and over 2 pounds lighter, better ergonomics, no more tethered into a harness, more user friendly, real wireless Bluetooth phones, is the best option for most.
      Like I said in another post.  There should be a convoy of GPZ users heading down the highway to get the new GPX-6000 and having more fun, more gold more often.  I can help make that smile happen.
      Anyone have a point I am missing or totally off, please chime in.
      Pic of the nugget will probably only be a few inches in depth difference between the 6 and 7.  But the majority of us would probably hear if with both machines at 30 or more.

    • By Purplehays69
      I totally understand that our Aussie brother's n sisters always get the jumpstart on the newest Minelab gold detector but our wait in the USA is getting totally ridiculous......
    • By Condor
      My personal observations only, quick testing with no appreciable methodology.  Make no conclusions based on my limited time with the machine.
      I had Steve's 6000 for a couple hours this morning.  At sunup I detected up a swale where Jason had found a couple nuggets yesterday.  I gridded a section 6 ft wide and about 25 yds long.  I marked 7 undug targets, 4 definite dig me signals and 3 iffy threshold warbles with the 6000 and 11" coil.  I then covered the same ground with my 7000 and 15x10 Xcoil.  The 7000 had no trouble with any of the 4 dig me targets and found no new targets.  Nothing but Ground and Salt noise over the questionable targets.  I dug the clear targets, first 2 were micro nuggets in the .2 gram range.  Third was a shallow hot rock and the 4th was surface trash.  I ran the 6000 back over the questionable targets and couldn't get anything repeatable.  
      I wish I had known JP's thing about the speaker/EMI because I was noise cancelling often, especially if I set the machine down for any length of time.
      Jason's summary from yesterday sums up our limited joint testing quite well.  My feeling after this limited time is that if I were 5 years younger, I would stick to the 7000 with the array of X-Coils to suit the conditions.  But, I'll turn 67 years young next month and my detecting shoulder has been nagging me for several years.  I have fashioned a hipstick that transfers the detector weight into the frame of an archery fanny pack with shoulder straps.  I thought it was great until I swung the 6000 with 11" coil.  Regrettably, I decided to run the 6000 with the 17" coil with no bungee this morning.  45 minutes and I was done, hence my abbreviated time on the 6000.  I'm  gonna want a bungee for the 14" DD or the 17" coils.  
      N. Nevada at this time of year is tough to hunt.  The weather is great, but the ground has enough moisture to make the salt darn near unbearable in many places.  The 6000 with 11" coil tames it some, but there's no magic absent the DD coil.  Hot rocks are about the same as the 7000, although I found the Auto + with nearly silent threshold chops the tailing edge of a hotrock signal.  You'd still have to dig them, but without enthusiasm.  
      Am I buying one, probably.  But I'm not rich and doubt I can justify $13k worth of detectors.  I'm going to need to make an either or decision.  
    • By Steve Herschbach
      Has Minelab not given dealers a price list yet? What are the accessory prices for the 6K? They are delivering around the world (except the U.S.) so somebody must have accessory pricing. Or it’s out there and I’ve been too busy to find it. A lot of people are not going to buy until after they know the accessory pricing,  and decide it’s acceptable.
×
×
  • Create New...