Popular Post dogodog Posted April 24, 2021 Popular Post Share Posted April 24, 2021 Well after a long frustrating wait for Nokta's multi frequency machine, I could no longer wait or hold out. I received my new equinox 800 on the 19th and did some air tests and made a list of the VDI's and played with flipping the tones for my liking. After thinking the machine was just OK with some of my basic testing, It was time to run across the street to give it a run. I will tell you all that I have hunted this area to death with my MK. ( or so I thought) I only had 90 minutes to give its first test. I decided to dig every target with an 18 or higher VDI. Just trying to decifer my new sounds. First 5 min. netted some clad, but the next 85 broke all my records. first 3 coins after the clad were large cents, the next was a draped bust 1/2 cent (bucket 1) The next was a paper thin copper with a shield, could it be? Yes it was a New Jersey copper. I have been chasing this coin for years (bucket 2). Then a single button and an Israeli 1/2 shekel (not sure how that got there). I only had a few minutes left to hunt when I got a faint 18 on the nox and hit a button at 10 inches, But that wasn't all this hole had to give. It was like a button slot machine, 12 in all and total of 15 inches down. My wonderful wife called and I had to leave for dinner. I have to say the most impressive feature on the nox is the noise cancel, It made the site come back to life. As for settings, Park 1, sensitivity 17, and custom tone breaks and t1 - 1 t2- 25 t3 - 15 t4 - 10 t5 - 5 Tone sounds, I run them to get low tones on copper targets. Sounds odd I know, but it works for me. Have to say I'm impressed with the first 90 minutes I've run the 800. 22 1 1 Link to comment Share on other sites More sharing options...
JCR Posted April 24, 2021 Share Posted April 24, 2021 Most excellent! Congratulations. 1 Link to comment Share on other sites More sharing options...
mn90403 Posted April 24, 2021 Share Posted April 24, 2021 That is quite a haul for a hammered place across the road! I wonder what you will find when you get used to the detector! haha (You may want to dig lower numbers because I've found that deep targets come up when you get them close or out of the hole.) Mitchel 1 1 Link to comment Share on other sites More sharing options...
kac Posted April 24, 2021 Share Posted April 24, 2021 Hats off, nice run. The Nokta's can get really noisy and probably why you missed many of those, very easy to go tone deaf if the gains too high. I'm still learning on the Kruzer and had it a year and finally got it where I like. Of course mos the time I go back to my old Tejon to give my ears a break 🙂 You may want to check out one of the eliptical coils from Coiltek, they may pan out really well in high trash areas and poking around in the woods. 2 Link to comment Share on other sites More sharing options...
GB_Amateur Posted April 24, 2021 Share Posted April 24, 2021 Wow, that's better than I've done in (my best) 90 hours! So much for a gradual learning curve. 😁 1 hour ago, dogodog said: custom tone breaks Curious where you set these. Most useful old coin hunting settings for me are the 800's many tone break, pitch, and volume options for 5 tones (oh, and the adjustable recovery speed). Can't wait to see your early silver coin find. 2 Link to comment Share on other sites More sharing options...
Jeff McClendon Posted April 24, 2021 Share Posted April 24, 2021 That was quite an amazing hunt. I hate to say it, but I am not surprised. The Equinox 600 and 800 can really detect some deep targets and they don’t just detect them. Lots of VLFs can do that. The Equinox 600 and 800 can actually give the user enough information to accurately identify the conductivity of those deep targets and they can definitely give enough information to encourage digging them. I have owned and used all of the current major intermediate level VLF detectors except for the Anfibio and have tested them in the field against the Equinox on wild targets and in my test bed. Sure, any decent detector coupled with an experienced detector operator can find targets that others have missed. But when I go behind myself with an Equinox on ground I have detected with other detectors...............I really can’t believe it sometimes and I rarely have my Equinox on full power. 4 Link to comment Share on other sites More sharing options...
Valens Legacy Posted April 24, 2021 Share Posted April 24, 2021 Fantastic hunting and a great write up. Loved seeing all the pictures. Good luck on your next outing. 2 Link to comment Share on other sites More sharing options...
F350Platinum Posted April 24, 2021 Share Posted April 24, 2021 Outstanding hunt! The Equinox is a beast of a machine, I don't think you'll regret getting one. When you find those large coins it really wakes you up! Remarkable mix of modern and colonial. 1 Link to comment Share on other sites More sharing options...
F350Platinum Posted April 24, 2021 Share Posted April 24, 2021 10 hours ago, mn90403 said: That is quite a haul for a hammered place across the road! I wonder what you will find when you get used to the detector! haha (You may want to dig lower numbers because I've found that deep targets come up when you get them close or out of the hole.) Mitchel This is very true. They're "gettinbetters" 😀I'll dig a 14 and end up with a 22, no other metal in the hole. Is this just a quirk of the Equinox? I have also noticed that when you get a bunch of tones (default tone breaks in Field 2) over a target if you hear any ascending tone in the mix you should definitely dig it. 3 Link to comment Share on other sites More sharing options...
dogodog Posted April 24, 2021 Author Share Posted April 24, 2021 Little update, I got to looking at 2 of the large cents, because they looked a little small. Well after a little cleaning, One turned out to be a Connecticut copper and the other is a draped bust. Sadly they are in really bad shape. 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now