Jump to content

Was Wondering Why My Pinpointer Would Not Sound Off


Recommended Posts

Just got the TARsacci, and am new to it . so I was out at the park and kept getting signals that after digging the plug i got no sound. so I thought G WIZZ could anything be that deep ? so i dug down and down and finnaly the pinpointer started to beep. and i figured it must be a big iron .  but low and behold at a full 14" up comes a brass lamp part. and get this i did not have the detector maxed out  i was in 6.5khz black sand on and salinity on at 37 and a gain of 5 and threshold of 2.  Also it can agnor some kinda beefy foils and not only ignore them on the suface, ( I dug no small foils)  but you can whack a penny derectly under the foil and no masking like 7" under the foil I did the testing . no VLF I know will do that . I will be selling my TDI soon  the Tarsacci not only ignors the small foils but can hit silver and Gold under the foil

20210504_155710.jpg

  • Like 5
  • Thanks 1
Link to post
Share on other sites

12" coil, and i have been doing some testing as well . I have a dime buried at 7" and the ground is contaminated and i have overhead power lines20ft away. so i tried my DEUS and it would not hit the dime . but has the 9" coil  but the emi is efecting the Deus so i have to turn down the gain, so then its not hitting the dime . the Tarsacci with the 12" coil on 5 and 6 gain hits it hard. but you would think the bigger coils would be more EMI prone.  but one thing that helps is the BLACK SAND MODE it really clears up the signal

 

  • Like 1
  • Thanks 1
Link to post
Share on other sites

I’m glad somebody finally noticed this.....👍

Aaron

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By JimT
      I have a Tarsacci on the way, should be here by mid week.  Reading some of the posts 18 KHz hasn’t been as productive hitting silver in some of the posts I have read.  

      I will be hunting pasture, old camp sites and old house sites.  There will be iron and sometimes lots of it.  Hunting for Buttons, bullets and other relics would you use 6 kHz 9 kHz 12 kHz or back to the 18 kHz.  Silver of course would be a high conductor, I would think brass and lead might fall into the mid range conductors.  

      if anyone would share their experience with me I would appreciate it. .  
    • By Carolina
      Once again today my Tarsacci would not turn off. You could feel the tactile switch clicking but no effect. I finally removed the battery cap and turned it off. I reinstalled the battery cap and could hear static in my phones as the cap negative made contact but a blank screen. I pushed and pushed and pushed the on switch to no avail. After removing the battery cap several more times each time reapplying I could hear the static in the phones but no screen. Finally upon installing the cap it came to life. I did notice that the salt balance was not acting as normal also in all frequencies. Keep in mind I have used this machine regularly for two years so I know it fairly well. This only started when I installed the new 12” coil. That is the only difference. I will put the stock coil back on and give it a go.
    • By JimT
      I have been detecting for about 30 years I have used a lot of brands and machines.  I was out of detecting for about 5 years due to an injury but recently purchased a Nox 800.  
       
      While looking for videos on the Nox I came across a video of this machine.  The videos are impressive.  So now my research begins in this machine and would appreciate any input from the folks here.  
       
      I live in Arkansas (Ozarks) and basically hunt for civil war relics in pasture and old house sites.  In my mind I thought the stock coil would be the way to go but some are talking about how well the Beast separates in Iron. 
       
      just asking for honest feedback you do not have a claim jumper in me.  

    • By Dug2gld
      The 12 inch coil is awesome in the iron. Still no silver. But I just haven’t gotten over top of it yet.  That small flat button was at least 12 inches down and next to iron! 




    • By Dug2gld
      No pics to show, but I did a video, can’t upload it to this forum. But I wanted to say the one reason I wanted to try the Tarsacci was I heard it might be doable in the red dirt of VA.  I have a friend that lives near Culpeper and she has a test garden. Items have been in the ground for about 5 months.  The tarsacci heard the targets at different depths with no issues.  I love this machine and will use it at the upcoming hunts this fall in the red dirt!  The deus struggled and only heard a few targets in the same test garden.  
    • By Kaolin washer
      Just got this machine, so i just wanted to take it out in the yard i have hunted for 4 weeks with the XP ORXand DEUS , after digging some tabs , which amazed me as i had been over this spot , and not just one but 6 targets i missed then i find the sterling Military pendant at 7" deep . I did not dig one Iron item, but i could hear iron .  all i can say is this machine is different and its good ,very good .  in 5 minutes this machine pulled out the 1st silver from this site.



×
×
  • Create New...