Jump to content

Orx Testing At Low Gain Setting


Recommended Posts

I wanted to set up the ORX for shallow park hunting. so i chose the coin fast program.and used a low 56 sensitivity , and set the disc at 45 to make a low tone on small foil, and the reaction was on 2.5 and at that setting i could still get a good signal on a 6" dime and on pull tabs7" now the small foil can be picked up at 4and 5 " but makes a low  so i did one more test i took the small foil,which is flat not crumpled ,set a penny under a cup turned upside down, and put the foil on top . in fact two pieces of small foil about the size of a quarter  covering the penny 3.5" under and i got a mid tone and not a low , If the penny was removed i got a low .  so the ORX can get thru small foils and at least give a mid tone thru the small foils  and that for just shallow park hunting. and i was using the 8.4 khz for the test as it is less responsive to foils, but still hits on tabs and nickles good .so i can find rings

  • Like 2
Link to comment
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...